Conversion of waste heat to voltage has the potential to significantly reduce the carbon footprint of a number of critical energy sectors, such as the transportation and electricity‐generation ...sectors, and manufacturing processes. Thermal energy is also an abundant low‐flux source that can be harnessed to power portable/wearable electronic devices and critical components in remote off‐grid locations. As such, a number of different inorganic and organic materials are being explored for their potential in thermoelectric‐energy‐harvesting devices. Carbon‐based thermoelectric materials are particularly attractive due to their use of nontoxic, abundant source‐materials, their amenability to high‐throughput solution‐phase fabrication routes, and the high specific energy (i.e., W g−1) enabled by their low mass. Single‐walled carbon nanotubes (SWCNTs) represent a unique 1D carbon allotrope with structural, electrical, and thermal properties that enable efficient thermoelectric‐energy conversion. Here, the progress made toward understanding the fundamental thermoelectric properties of SWCNTs, nanotube‐based composites, and thermoelectric devices prepared from these materials is reviewed in detail. This progress illuminates the tremendous potential that carbon‐nanotube‐based materials and composites have for producing high‐performance next‐generation devices for thermoelectric‐energy harvesting.
Advances toward understanding the potential of carbon nanotubes for thermoelectric energy harvesting are reviewed. For low‐temperature thermoelectric applications, the performance metrics of carbon nanotubes and nanotube‐based composites are becoming competitive with traditional inorganic thermoelectric materials, with nanotube‐based materials and devices having the added benefits of nontoxicity, solution‐processability, and flexibility.
Mothers' own milk is the best source of nutrition for nearly all infants. Beyond somatic growth, breast milk as a biologic fluid has a variety of other benefits, including modulation of postnatal ...intestinal function, immune ontogeny, and brain development. Although breastfeeding is highly recommended, breastfeeding may not always be possible, suitable or solely adequate. Infant formula is an industrially produced substitute for infant consumption. Infant formula attempts to mimic the nutritional composition of breast milk as closely as possible, and is based on cow's milk or soymilk. A number of alternatives to cow's milk-based formula also exist. In this article, we review the nutritional information of breast milk and infant formulas for better understanding of the importance of breastfeeding and the uses of infant formula from birth to 12 months of age when a substitute form of nutrition is required.
Heat is an abundant but often wasted source of energy. Thus, harvesting just a portion of this tremendous amount of energy holds significant promise for a more sustainable society. While traditional ...solid-state inorganic semiconductors have dominated the research stage on thermal-to-electrical energy conversion, carbon-based semiconductors have recently attracted a great deal of attention as potential thermoelectric materials for low-temperature energy harvesting, primarily driven by the high abundance of their atomic elements, ease of processing/manufacturing, and intrinsically low thermal conductivity. This quest for new materials has resulted in the discovery of several new kinds of thermoelectric materials and concepts capable of converting a heat flux into an electrical current by means of various types of particles transporting the electric charge: (i) electrons, (ii) ions, and (iii) redox molecules. This has contributed to expanding the applications envisaged for thermoelectric materials far beyond simple conversion of heat into electricity. This is the motivation behind this review. This work is divided in three sections. In the first section, we present the basic principle of the thermoelectric effects when the particles transporting the electric charge are electrons, ions, and redox molecules and describe the conceptual differences between the three thermodiffusion phenomena. In the second section, we review the efforts made on developing devices exploiting these three effects and give a thorough understanding of what limits their performance. In the third section, we review the state-of-the-art thermoelectric materials investigated so far and provide a comprehensive understanding of what limits charge and energy transport in each of these classes of materials.
Compared to imaging in the visible and near‐infrared regions below 900 nm, imaging in the second near‐infrared window (NIR‐II, 1000–1700 nm) is a promising method for deep‐tissue high‐resolution ...optical imaging in vivo mainly owing to the reduced scattering of photons traversing through biological tissues. Herein, semiconducting single‐walled carbon nanotubes with large diameters were used for in vivo fluorescence imaging in the long‐wavelength NIR region (1500–1700 nm, NIR‐IIb). With this imaging agent, 3–4 μm wide capillary blood vessels at a depth of about 3 mm could be resolved. Meanwhile, the blood‐flow speeds in multiple individual vessels could be mapped simultaneously. Furthermore, NIR‐IIb tumor imaging of a live mouse was explored. NIR‐IIb imaging can be generalized to a wide range of fluorophores emitting at up to 1700 nm for high‐performance in vivo optical imaging.
Semiconducting single‐walled carbon nanotubes with large diameters were used for in vivo fluorescence imaging in the long‐wavelength near‐infrared region (1500–1700 nm). With this imaging agent, 3–4 μm wide capillary blood vessels at a depth of about 3 mm in living mice could be resolved, and the blood‐flow speeds in multiple individual vessels were mapped simultaneously.
We modify the fundamental electronic properties of metallic (1T phase) nanosheets of molybdenum disulfide (MoS2) through covalent chemical functionalization, and thereby directly influence the ...kinetics of the hydrogen evolution reaction (HER), surface energetics, and stability. Chemically exfoliated, metallic MoS2 nanosheets are functionalized with organic phenyl rings containing electron donating or withdrawing groups. We find that MoS2 functionalized with the most electron donating functional group (p-(CH3CH2)2NPh-MoS2) is the most efficient catalyst for HER in this series, with initial activity that is slightly worse compared to the pristine metallic phase of MoS2. The p-(CH3CH2)2NPh-MoS2 is more stable than unfunctionalized metallic MoS2 and outperforms unfunctionalized metallic MoS2 for continuous H2 evolution within 10 min under the same conditions. With regards to the entire studied series, the overpotential and Tafel slope for catalytic HER are both directly correlated with the electron donating strength of the functional group. The results are consistent with a mechanism involving ground-state electron donation or withdrawal to/from the MoS2 nanosheets, which modifies the electron transfer kinetics and catalytic activity of the MoS2 nanosheet. The functional groups preserve the metallic nature of the MoS2 nanosheets, inhibiting conversion to the thermodynamically stable semiconducting state (2H) when mildly annealed in a nitrogen atmosphere. We propose that the electron density and, therefore, reactivity of the MoS2 nanosheets are controlled by the attached functional groups. Functionalizing nanosheets of MoS2 and other transition metal dichalcogenides provides a synthetic chemical route for controlling the electronic properties and stability within the traditionally thermally unstable metallic state.
Semiconducting single-walled carbon nanotubes (s-SWCNTs) represent a tunable model one-dimensional system with exceptional optical and electronic properties. High-throughput separation and ...purification strategies have enabled the integration of s-SWCNTs into a number of optoelectronic applications, including photovoltaics (PVs). In this Perspective, we discuss the fundamental underpinnings of two model PV interfaces involving s-SWCNTs. We first discuss s-SWCNT–fullerene heterojunctions where exciton dissociation at the donor–acceptor interface drives solar energy conversion. Next, we discuss charge extraction at the interface between s-SWCNTs and a photoexcited perovskite active layer. In each case, the use of highly enriched semiconducting SWCNT samples enables fundamental insights into the thermodynamic and kinetic mechanisms that drive the efficient conversion of solar photons into long-lived separated charges. These model systems help to establish design rules for next-generation PV devices containing well-defined organic semiconductor layers and help to frame a number of important outstanding questions that can guide future studies.
ABSTRACT With an instantaneous view of 70% of the sky, the Fermi Gamma-ray Burst Monitor (GBM) is an excellent partner in the search for electromagnetic counterparts to gravitational-wave (GW) ...events. GBM observations at the time of the Laser Interferometer Gravitational-wave Observatory (LIGO) event GW150914 reveal the presence of a weak transient above 50 keV, 0.4 s after the GW event, with a false-alarm probability of 0.0022 (2.9 ). This weak transient lasting 1 s was not detected by any other instrument and does not appear to be connected with other previously known astrophysical, solar, terrestrial, or magnetospheric activity. Its localization is ill-constrained but consistent with the direction of GW150914. The duration and spectrum of the transient event are consistent with a weak short gamma-ray burst (GRB) arriving at a large angle to the direction in which Fermi was pointing where the GBM detector response is not optimal. If the GBM transient is associated with GW150914, then this electromagnetic signal from a stellar mass black hole binary merger is unexpected. We calculate a luminosity in hard X-ray emission between 1 keV and 10 MeV of 1.8 − 1.0 + 1.5 × 10 49 erg s−1. Future joint observations of GW events by LIGO/Virgo and Fermi GBM could reveal whether the weak transient reported here is a plausible counterpart to GW150914 or a chance coincidence, and will further probe the connection between compact binary mergers and short GRBs.
Fluorescence imaging is capable of acquiring anatomical and functional infor- mation with high spatial and temporal resolution. This imaging technique has been indispensable in biological research ...and disease detection/diagnosis. Imaging in the visible and to a lesser degree, in the near-infrared (NIR) regions below 900 nm, suffers from autofluorescence arising from endogenous fluorescent molecules in biological tissues. This autofluorescence interferes with fluorescent molecules of interest, causing a high background and low detection sensitivity. Here, we report that fluorescence imaging in the 1,500-1,700-nm region (termed "NIR-IIb") under 808-nm excitation results in nearly zero tissue autofluorescence, allowing for background-free imaging of fluorescent species in otherwise notoriously autofluorescent biological tissues, including liver. Imaging of the intrinsic fluorescence of individual fluorophores, such as a single carbon nanotube, can be readily achieved with high sensitivity and without autofluorescence background in mouse liver within the 1,500-1,700-nm wavelength region.