Abstract
We present the Mid-infrared stellar Diameters and Fluxes compilation Catalogue (MDFC) dedicated to long-baseline interferometry at mid-infrared wavelengths (3–13 $\mu$m). It gathers data for ...half a million stars, i.e. nearly all the stars of the Hipparcos-Tycho catalogue whose spectral type is reported in the SIMBAD data base. We cross-match 26 data bases to provide basic information, binarity elements, angular diameter, magnitude and flux in the near and mid-infrared, as well as flags that allow us to identify the potential calibrators. The catalogue covers the entire sky with 465 857 stars, mainly dwarfs and giants from B to M spectral types closer than 18 kpc. The smallest reported values reach 0.16 $\mu$Jy in L and 0.1 $\mu$Jy in N for the flux, and 2 microarcsec for the angular diameter. We build four lists of calibrator candidates for the L and Nbands suitable with the Very Large Telescope Interferometer (VLTI) sub- and main arrays using the MATISSE instrument. We identify 1621 candidates for L and 44 candidates for N with the Auxiliary Telescopes (ATs), 375 candidates for both bands with the ATs, and 259 candidates for both bands with the Unit Telescopes (UTs). Predominantly cool giants, these sources are small and bright enough to belong to the primary lists of calibrator candidates. In the near future, we plan to measure their angular diameter with 1 per cent accuracy.
ABSTRACT
A good knowledge of the angular diameters of stars used to calibrate the observables in stellar interferometry is fundamental. As the available precision for giant stars is worse than the ...required per cent level, we aim to improve the knowledge of many diameters using MATISSE (Multiple AperTure mid-Infrared SpectroScopic Experiment) data in its different instrumental configurations. Using the squared visibility MATISSE observable, we compute the angular diameter value, which ensures the best-fitting curves, assuming an intensity distribution of a uniform disc. We take into account that the transfer function varies over the wavelength and is different from one instrumental configuration to another. The uncertainties on the diameters are estimated using the residual bootstrap method. Using the low spectral resolution mode in the Lband, we observed a set of 35 potential calibrators selected in the Mid-infrared stellar Diameter and Flux Compilation Catalogue with diameters ranging from about 1 to 3 mas. We reach a precision on the diameter estimates in the range 0.6 per cent to 4.1 per cent. The study of the stability of the transfer function in visibility over two nights makes us confident in our results. In addition, we identify one star, 75 Vir initially present in the calibrator lists, for which our method does not converge, and prove to be a binary star. This leads us to the conclusion that our method is actually necessary to improve the quality of the astrophysical results obtained with MATISSE, and that it can be used as a useful tool for ‘bad calibrator’ detection.
Abstract
We determine the physical parameters of the outer atmosphere of a sample of eight evolved stars, including the red supergiant α Scorpii, the red giant branch stars α Bootis and γ Crucis, the ...K giant λ Velorum, the normal M giants BK Virginis and SW Virginis, and the Mira star W Hydrae (in two different luminosity phases) by spatially resolving the stars in the individual carbon monoxide (CO) first overtone lines. We used the Astronomical Multi-BEam combineR (AMBER) instrument at the Very Large Telescope Interferometer (VLTI), in high-resolution mode (λ/Δλ ≈ 12 000) between 2.28 and 2.31 $\, \mu {\rm m}$ in the K band. The maximal angular resolution is 10 mas, obtained using a triplet telescope configuration, with baselines from 7 to 48 m. By using a numerical model of a molecular atmosphere in a spherical shells (MOLsphere), called pampero (an acronym for the ‘physical approach of molecular photospheric ejection at high angular resolution for evolved stars’), we add multiple extended CO layers above the photospheric marcs model at an adequate spatial resolution. We use the differential visibilities and the spectrum to estimate the size (R) of the CO molsphere, its column density (NCO) and temperature (Tmol) distributions along the stellar radius. The combining of the χ2 minimization and a fine grid approach for uncertainty analysis leads to reasonable NCO and Tmol distributions along the stellar radius of the MOLsphere.
Context.
FS Canis Majoris (FS CMa, HD 45677) is an unclassified Be star surrounded by an inclined dust disk. The evolutionary stage of FS CMa is still debated. Perpendicular to the circumstellar ...disk, a bipolar outflow was detected. Infrared aperture-synthesis imaging provides us with a unique opportunity to study the disk structure.
Aims.
Our aim is to study the intensity distribution of the disk of FS CMa in the mid-infrared
L
and
N
bands.
Methods.
We performed aperture-synthesis imaging of FS CMa with the MATISSE instrument (Multi AperTure mid-Infrared SpectroScopic Experiment) in the low spectral resolution mode to obtain images in the
L
and
N
bands. We computed radiative transfer models that reproduce the
L
- and
N
-band intensity distributions of the resolved disks.
Results.
We present
L
- and
N
-band aperture-synthesis images of FS CMa reconstructed in the wavelength bands of 3.4–3.8 and 8.6–9.0 μm. In the
L
-band image, the inner rim region of an inclined circumstellar disk and the central object can be seen with a spatial resolution of 2.7 milliarcsec (mas). An inner disk cavity with an angular diameter of ~6 × 12 mas is resolved. The
L
-band disk consists of a bright northwestern (NW) disk region and a much fainter southeastern (SE) region. The images suggest that we are looking at the bright inner wall of the NW disk rim, which is on the far side of the disk. In the
N
band, only the bright NW disk region is seen. In addition to deriving the inclination and the inner disk radius, fitting the reconstructed brightness distributions via radiative transfer modelling allows one to constrain the innermost disk structure, in particular the shape of theinner disk rim.
Context.
The ‘Great Dimming’ of the prototypical red supergiant Betelgeuse, which occurred between December 2019 and April 2020, gives us unprecedented insight into the processes occurring on the ...stellar surface and in the inner wind of this type of star. In particular it may bring further understanding of their dust nucleation and mass-loss processes.
Aims.
Here, we present and analyse VLTI/MATISSE observations in the N band (8–13 µm) taken near the brightness minimum in order to assess the status of the dusty circumstellar environment.
Methods.
We explored the compatibility of a dust clump obscuring the star with our mid-infrared interferometric observations using continuum 3D radiative transfer modelling, and probed the effect of adding multiple clumps close to the star on the observables. We also tested the viability of a large cool spot on the stellar surface without dust present in the ambient medium.
Results.
Using the visibility data, we derived a uniform disk diameter of 59.02 ± 0.64 mas in the spectral range 8–8.75 µm. We find that both the dust clump and the cool spot models are compatible with the data. Further to this, we note that the extinction and emission of our localised dust clump in the line of sight of the star directly compensate for each other, making the clump undetectable in the spectral energy distribution and visibilities. The lack of infrared brightening during the Great Dimming therefore does not exclude extinction due to a dust clump as one of the possible mechanisms. The visibilities can be reproduced by a spherical wind with dust condensing at 13 stellar radii and a dust mass-loss rate of (2.1–4.9) × 10
−10
M
⊙
yr
−1
; however, in order to reproduce the complexity of the observed closure phases, additional surface features or dust clumps would be needed.
We study a sample of 16 bright and well-resolved late-type stars (10 O-rich giants, 2 red supergiants, and 4 C-rich giants) using the ESO VLTI/AMBER facility at medium resolution (R=1500) in the K ...band to detect and measure the deviation from centrosymmetry of their resolved surface brightness distribution. As indicator for departure from centrosymmetry, we use the centrosymmetry parameter (CSP). We observe that CSP increases along the asymptotic giant branch, reaching values as large as 30 degree . These large CSP values are likely attributable to a few large photospheric convective cells. Carbon stars like W Ori and R Scl, being close to the AGB tip, have the second largest CSP values (17. degree 6 and 22. degree 3, respectively), being only surpassed by the M5.5Ib/II supergiant T Cet (with CSP of 30. degree 4). For K and early M giants, CSP values are smaller, never exceeding 10 degree , with a clear tendency to increase with the atmospheric pressure scaleheight. This supports the hypothesis that the observed deviations from centrosymmetry are somehow related to convective cells, whose size depends upon the atmospheric pressure scaleheight.
Thanks to their large angular dimension and brightness, red giants and supergiants are privileged targets for optical long-baseline interferometers. 16 red giants and supergiants have been observed ...with the VLTI/AMBER facility over a 2-year period, at medium spectral resolution (
) in the K band. The limb-darkened angular diameters are derived from fits of stellar atmospheric models on the visibility and the triple product data. The angular diameters do not show any significant temporal variation, except for one target: TX Psc, which shows a variation of 4 per cent using visibility data. For the eight targets previously measured by long-baseline interferometry (LBI) in the same spectral range, the difference between our diameters and the literature values is less than 5 per cent, except for TX Psc, which shows a difference of 11 per cent. For the eight other targets, the present angular diameters are the first measured from LBI. Angular diameters are then used to determine several fundamental stellar parameters, and to locate these targets in the Hertzsprung-Russell diagram (HRD). Except for the enigmatic Tc-poor low-mass carbon star W Ori, the location of Tc-rich stars in the HRD matches remarkably well the thermally-pulsating asymptotic giant branch, as it is predicted by the stellar evolution models. For pulsating stars with periods available, we compute the pulsation constant and locate the stars along the various sequences in the period-luminosity diagram. We confirm the increase in mass along the pulsation sequences, as predicted by theory, except for W Ori which, despite being less massive, appears to have a longer period than T Cet along the first-overtone sequence.
ABSTRACT
Differential Interferometry allows to obtain the differential visibility and phase, in addition to the spectrum. The differential phase contains important information about the structure and ...motion of stellar photosphere such as stellar spots and non-radial pulsations, and particularly the rotation. Thus, this interferometric observable strongly helps to constrain the stellar fundamental parameters of fast rotators. The spectroastrometry mainly uses the photocentre displacements, which is a first approximation of the differential phase, and is applicable only for unresolved or marginally objects. We study here the sensitivity of relevant stellar parameters to the simulated photocentres using the scirocco code: a semi-analytical algorithm dedicated to fast rotators, applied to two theoretical modelling stars based on Achernar and Regulus, in order to classify the importance of these parameters and their impact on the modelling. We compare our simulations with published VLTI/AMBER data. This work sets the limits of application of photocentre displacements to fast rotators, and under which conditions we can use the photocentres and/or the differential phase, through a pre-established physical criterion. To validate our theoretical study, we apply our method of analysis on observed data of the edge-on fast rotator Regulus. For unresolved targets, with a visibility V ∼ 1, the photocentre can constrain the main stellar fundamental parameters of fast rotators, whereas from marginally resolved objects (0.8 ≤ V < 1), mainly the rotation axis position angle ($\rm PA_{\rm rot}$) can be directly deduced from the vectorial photocentre displacement, which is very important for young cluster studies.
Context. VX Sgr is a cool, evolved, and luminous red star whose stellar parameters are difficult to determine, which affects its classification.
Aims. We aim to spatially resolve the photospheric ...extent as well as the circumstellar environment.
Methods. We used interferometric observations obtained with the MATISSE instrument in the L (3–4 μm), M (4.5–5 μm), and N (8–13 μm) bands. We reconstructed monochromatic images using the MIRA software. We used 3D radiation-hydrodynamics simulations carried out with CO5BOLD and a uniform disc model to estimate the apparent diameter and interpret the stellar surface structures. Moreover, we employed the radiative transfer codes OPTIM3D and RADMC3D to compute the spectral energy distribution for the L, M, and N bands, respectively.
Results. MATISSE observations unveil, for the first time, the morphology of VX Sgr across the L, M, and N bands. The reconstructed images show a complex morphology with brighter areas whose characteristics depend on the wavelength probed. We measured the angular diameter as a function of the wavelength and showed that the photospheric extent in the L and M bands depends on the opacity through the atmosphere. In addition to this, we also concluded that the observed photospheric inhomogeneities can be interpreted as convection-related surface structures. The comparison in the N band yielded a qualitative agreement between the N-band spectrum and simple dust radiative transfer simulations. However, it is not possible to firmly conclude on the interpretation of the current data because of the difficulty in constraing the model parameters using the limited accuracy of our absolute flux calibration.
Conclusions. MATISSE observations and the derived reconstructed images unveil the appearance of VX Sgr’s stellar surface and circumstellar environment across a very large spectral domain for the first time.