The silicon vertex detector of the Belle II experiment Irmler, C.; Adamczyk, K.; Aggarwal, L. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
01/2023, Letnik:
1045
Journal Article
Recenzirano
Odprti dostop
The Belle II experiment is taking data at the asymmetric SuperKEKB collider (KEK, Japan), which operates at the Υ(4S) resonance. The vertex detector is composed of an inner two-layer pixel detector ...(PXD) and the silicon vertex detector (SVD), made of four layers of double-sided silicon strip detectors. A deep knowledge of the system has been gained since the start of operations in 2019 by assessing the high-quality and stable reconstruction performance of the detector. The very high hit efficiency and large signal-to-noise ratio are monitored via online data-quality plots. The good cluster-position resolution is estimated using the unbiased residual with respect to the track, and it is in reasonable agreement with the expectations. The SVD dose is estimated by the correlation of the SVD occupancy with the dose measured by the diamond sensors of the radiation-monitoring and beam-abort system. First radiation damage effects are measured on the sensor current and strip noise are shown not to affect the performance. Six samples of the shaped particle signal are recorded utilizing the multi-peak mode of the APV25 front-end chip and used to determine the hit timing with a precision of 2 to 3 ns. Recently a method to compute the time of collision from SVD hit time information has been implemented and verified with simulations and on data.
Performance of the Belle II Silicon Vertex Detector Tanigawa, H.; Adamczyk, K.; Aihara, H. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
08/2020, Letnik:
972
Journal Article
Recenzirano
Odprti dostop
The Belle II experiment at the SuperKEKB collider of KEK (Japan) started recording physics data in spring 2019 with all its subdetectors installed and with the goal of accumulating 50ab−1 of e+e− ...collision events at the unprecedented instantaneous luminosity of 8×1035cm−2s−1, about 40 times larger than its predecessor. The Belle II vertex detector plays a crucial role in the broad Belle II physics program, especially for time-dependent CP measurements. It consists of two layers of DEPFET-based pixels and four layers of double-sided silicon strip detectors (SVD).
The experience gained from the first period of SVD operation can be summarized as smooth and reliable running of the detector, with high stability of noise levels and calibration parameters obtained from local calibration runs. No major problem has been experienced. The detector even survived a few serious radiation accidents in which the beam was lost due to failure in the machine focusing quadrupoles without any notable damage. The SVD performance were carefully studied with these first physics data. The SVD showed excellent hit and tracking efficiency. Moreover, cluster energy and signal to noise ratio as well as the hit time and spatial resolutions measured on data showed a fair agreement with the expected performance.
•Belle II silicon vertex detector operated during the first year of the experiment.•All sensors worked with stable and excellent hit efficiencies above 99 %.•Signal-to-noise ratios between 15 and 30, cluster time resolution better than 3 ns.•First effects of irradiation visible in leakage currents.
The Belle II silicon vertex detector is one of the vertex detectors in the Belle II experiment. The detector reads out the signals from the double-sided silicon strip sensors with the APV25 front-end ...readout ASIC, adopting the chip-on-sensor concept to minimize the strip noise. The detector has been operated in the experiment since the spring of 2019. Analyzing the acquired data during the beam collisions, the excellent performance of the detector is confirmed. Also, the radiation dose and 1-MeV equivalent neutron fluence of the detector are estimated using the measured dose rates of the diamond sensors installed on the beam pipe and are compared with the measured radiation effects in the strip noise, leakage current, and depletion voltage. This paper briefly introduces the main features of the silicon vertex detector, and then reports on the measured performance and radiation effects of the first two years of running experience of the detector.
We report the first search for a non-standard-model resonance decaying into $\tau$ pairs in $e^{+}e^{-}\rightarrow \mu^{+}\mu^{-} \tau^+\tau^-$ events in the 3.6-10 GeV/$c^{2}$ mass range. We use a ...62.8 fb$^{-1}$ sample of $e^+e^-$ collisions collected at a center-of-mass energy of 10.58 GeV by the Belle II experiment at the SuperKEKB collider. The analysis probes three different models predicting a spin-1 particle coupling only to the heavier lepton families, a Higgs-like spin-0 particle that couples preferentially to charged leptons (leptophilic scalar), and an axion-like particle, respectively. We observe no evidence for a signal and set exclusion limits at 90% confidence level on the product of cross section and branching fraction into $\tau$ pairs, ranging from 0.7 fb to 24 fb, and on the couplings of these processes. We obtain world-leading constraints on the couplings for the leptophilic scalar model for masses above 6.5 GeV/$c^2$ and for the axion-like particle model over the entire mass range.
The Silicon Vertex Detector of the Belle II experiment Uematsu, Y.; Adamczyk, K.; Aggarwal, L. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
06/2022, Letnik:
1033
Journal Article
Recenzirano
The Silicon Vertex Detector (SVD) is a part of the vertex detector in the Belle II experiment at the SuperKEKB collider (KEK, Japan). Since the start of data taking in spring 2019, the SVD has been ...operating stably and reliably with a high signal-to-noise ratio and hit efficiency, achieving good spatial resolution and high track reconstruction efficiency. The hit occupancy, which mostly comes from the beam-related background, is currently about 0.5% in the innermost layer, causing no impact on the SVD performance. In anticipation of the operation at higher luminosity in the following years, two strategies to sustain the tracking performance in future high beam background conditions have been developed and tested on data. One is to reduce the number of signal waveform samples to decrease dead time, data size, and occupancy. The other is to utilize the good hit-time resolution to reject the beam background hits. We also measured the radiation effects on the full depletion voltage, sensor current, and strip noise caused during the first two and a half years of operation. The results show no detrimental effect on the SVD performance.
The Silicon Vertex Detector of the Belle II experiment Zani, L.; Adamczyk, K.; Aggarwal, L. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
09/2022, Letnik:
1038
Journal Article
Recenzirano
Odprti dostop
Since the start of data taking in spring 2019 at the SuperKEKB collider (KEK, Japan) the Belle II Silicon Vertex Detector (SVD) has been operating reliably and with high efficiency, while providing ...high quality data: high signal-to-noise ratio, greater than 99% hit efficiency, and precise spatial resolution. These attributes, combined with stability over time, result in good tracking efficiency. Currently the occupancy, dominated by beam-background hits, is quite low (about 0.5 % in the innermost layer), causing no problems to the SVD data reconstruction. In view of the operation at higher luminosity foreseen in the next years, specific strategies aiming to preserve the tracking performance have been developed and tested on data. The time stability of the trigger allows reducing sampling of the strip-amplifier waveform. The good hit-time resolution can be exploited to further improve the robustness against the higher level of beam background. First effects of radiation damage on strip noise, sensor currents and depletion voltage have been measured: they do not have any detrimental effect on the performance of the detector. Furthermore, no damage to the SVD is observed after sudden and intense bursts of radiation due to beam losses.
We study $B^{+}\to \pi^{+}\pi^{0}\pi^{0}$ using 711 $\rm{fb}^{-1}$ of data collected at the $\Upsilon(4S)$ resonance with the Belle detector at the KEKB asymmetric-energy $e^{+}e^{-}$ collider. We ...measure an inclusive branching fraction of $(19.0\pm 1.5\pm 1.4)\times 10^{-6}$ and an inclusive \textit{CP} asymmetry of $(9.2 \pm 6.8 \pm 0.7)\%$, where the first uncertainties are statistical and the second are systematic; and a $B^{+}\to \rho(770)^{+}\pi^{0}$ branching fraction of $(11.2\pm 1.1\pm 0.9 ^{+0.8}_{-1.6})\times 10^{-6}$, where the third uncertainty is due to possible interference with $B^{+}\to \rho(1450)^{+}\pi^{0}$. We present the first observation of a structure around 1 GeV/$c^{2}$ in the $\pi^{0}\pi^{0}$ mass spectrum, with a significance of 6.4$\sigma$, and measure a branching fraction to be $(6.9\pm 0.9\pm 0.6)\times 10^{-6}$. We also report a measurement of local \textit{CP} asymmetry in this structure.
The Silicon Vertex Detector (SVD), with its four double-sided silicon strip sensor layers, is one of the two vertex sub-detectors of Belle II operating at SuperKEKB collider (KEK, Japan). Since 2019 ...and the start of the data taking, the SVD has demonstrated a reliable and highly efficient operation, even running in an environment with harsh beam backgrounds that are induced by the world’s highest instantaneous luminosity.
In order to provide the best quality track reconstruction with an efficient pattern recognition and track fit, and to correctly propagate the uncertainty on the hit’s position to the track parameters, it is crucial to precisely estimate the resolution of the cluster position measurement. Several methods for estimating the position resolution directly from the data will be discussed.
Simulation of the Belle II silicon vertex detector Kaleta, M.; Adamczyk, K.; Aggarwal, L. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
06/2022, Letnik:
1032
Journal Article
Recenzirano
Belle II is the next generation B Factory experiment operating at the SuperKEKB accelerator complex at KEK in Tsukuba, Japan. It is expected to collect 50 ab−1 of data, with a target instantaneous ...luminosity of 6.5 × 1035 cm−2s−1, which is about 30 times larger than its predecessor, Belle. In view of the ever increasing Belle II data sample, accurate simulation of the detector is growing in importance. This poses a challenging task of compromising between the realistic modeling of the response of individual detector components and reasonable performance in terms of CPU time of the simulation. In this paper we describe the simulation of the silicon vertex detector, its performance against collision data and optimization.
