While the international nEDM collaboration at the Paul Scherrer Institut (PSI) took data in 2017 that covered a considerable fraction of the parameter space of claimed potential signals of ...hypothetical neutron (n) to mirror-neutron (n′) transitions, it could not test all claimed signal regions at various mirror magnetic fields. Therefore, a new study of n−n′ oscillations using stored ultracold neutrons (UCNs) is underway at PSI, considerably expanding the reach in parameter space of mirror magnetic fields (B′) and oscillation time constants (τnn′). The new apparatus is designed to test for the anomalous loss of stored ultracold neutrons as a function of an applied magnetic field. The experiment is distinguished from its predecessors by its very large storage vessel (1.47 m3), enhancing its statistical sensitivity. In a test experiment in 2020 we have demonstrated the capabilities of our apparatus. However, the full analysis of our recent data is still pending. Based on already demonstrated performance, we will reach sensitivity to oscillation times τnn′/cos(β) well above a hundred seconds, with β being the angle between B′ and the applied magnetic field B. The scan of B will allow the finding or the comprehensive exclusion of potential signals reported in the analysis of previous experiments and suggested to be consistent with neutron to mirror-neutron oscillations.
We present a current monitoring system based on optical magnetometry, which is able to discriminate true current variations from environmental effects at room temperature. The system consists of a ...dedicated thermally stable magnetic field confining coil and an array of four optically pumped magnetometers arranged in a two-dimensional gradiometer configuration. These magnetometers monitor magnetic field variations inside the coil, which correlate to the variations of the driving current of the coil. The system uses a digital signal-processing unit to extract and record in real time the magnetic field values measured by the magnetometers, which allows a real time monitoring of the current. The system's coil, which is made out of printed circuit boards, can easily be changed to adapt the current-to-field conversion. Thus, we can expand the applicability of this system to a wide range of currents. By using this system to actively feedback control a current source we stabilized a current of 20 mA on a level better than \(5 \times 10^{-9}\).
PDF