•Approaches for CO2 leakage detection, attribution and quantification monitoring exist.•Many approaches cover multiple monitoring tasks simultaneously.•Sonars and chemical sensors on ships or AUVs ...can cover large areas.•Newer, more specific technologies can detect, verify and quantify smaller, localised leaks.
Environmental monitoring of offshore Carbon Capture and Storage (CCS) complexes requires robust methodologies and cost-effective tools to detect, attribute and quantify CO2 leakage in the unlikely event it occurs from a sub-seafloor reservoir. Various approaches can be utilised for environmental CCS monitoring, but their capabilities are often undemonstrated and more detailed monitoring strategies need to be developed. We tested and compared different approaches in an offshore setting using a CO2 release experiment conducted at 120 m water depth in the Central North Sea. Tests were carried out over a range of CO2 injection rates (6 - 143 kg d−1) comparable to emission rates observed from abandoned wells. Here, we discuss the benefits and challenges of the tested approaches and compare their relative cost, temporal and spatial resolution, technology readiness level and sensitivity to leakage. The individual approaches demonstrate a high level of sensitivity and certainty and cover a wide range of operational requirements. Additionally, we refer to a set of generic requirements for site-specific baseline surveys that will aid in the interpretation of the results. Critically, we show that the capability of most techniques to detect and quantify leakage exceeds the currently existing legal requirements.
Biogeochemical cycles of carbon, nutrients, and oxygen transmit mean states, trends and variations of the physical realm in coastal upwelling systems to their food webs and determine their role in ...regional budgets of greenhouse gases. This contribution focuses on biogeochemical processes in the northern Benguela Upwelling System (NBUS), where low oxygen levels in upwelling source water are a major influence on carbon and nutrient cycles. Based on measurements during numerous expeditions and results of 3-D regional ecosystem modeling (project GENUS; Geochemistry and Ecology of the Namibian Upwelling System) we here examine source water character, effects of low oxygen conditions on nutrient masses and ratios, and of diazotrophic N2-fixation on productivity of the system and its transition to the adjacent eastern South Atlantic. In available observations, the effects of denitrification in water and sediment and phosphate release from sediments are minor influences on nitrate:phosphate ratios of the system, and excess phosphate in aged upwelling water is inherited from upwelling source water. Contrary to expectation and model results, the low N:P ratios do not trigger diazotrophic N2-fixation in the fringes of the upwelling system, possibly due to a lack of seeding populations of Trichodesmium. We also examine the flux of carbon from the sea surface to either sediment, the adjacent sub-thermocline ocean, or to regenerated nutrients and CO2. Observed fluxes out of the surface mixed layer are significantly below modeled fluxes, and suggest that regeneration of nutrients and CO2 is unusually intense in the mixed layer. This contributes to very high fluxes of CO2 from the ocean to the regional atmosphere, which is not compensated for by N2-fixation. Based on observations, the NBUS thus is a significant net CO2 source (estimated at 14.8TgCa−1), whereas the CO2 balance is closed by N2-fixation in the model. Methane concentrations were low in surface waters in on-line measurements during 1 expedition, and based on these our estimate for the emission of methane for the entire Benguela system is below 0.2TgCH4 a−1.
In addition to reducing carbon dioxide (CO
2
) emissions, actively removing CO
2
from the atmosphere is widely considered necessary to keep global warming well below 2°C. Ocean Alkalinity Enhancement ...(OAE) describes a suite of such CO
2
removal processes that all involve enhancing the buffering capacity of seawater. In theory, OAE both stores carbon and offsets ocean acidification. In practice, the response of the marine biogeochemical system to OAE must be demonstrably negligible, or at least manageable, before it can be deployed at scale. We tested the OAE response of two natural seawater mixed layer microbial communities in the North Atlantic Subtropical Gyre, one at the Western gyre boundary, and one in the middle of the gyre. We conducted 4-day microcosm incubation experiments at sea, spiked with three increasing amounts of alkaline sodium salts and a
13
C-bicarbonate tracer at constant pCO
2
. We then measured a suite of dissolved and particulate parameters to constrain the chemical and biological response to these additions. Microbial communities demonstrated occasionally measurable, but mostly negligible, responses to alkalinity enhancement. Neither site showed a significant increase in biologically produced CaCO
3
, even at extreme alkalinity loadings of +2,000 μmol kg
−1
. At the gyre boundary, alkalinity enhancement did not significantly impact net primary production rates. In contrast, net primary production in the central gyre decreased by ~30% in response to alkalinity enhancement. The central gyre incubations demonstrated a shift toward smaller particle size classes, suggesting that OAE may impact community composition and/or aggregation/disaggregation processes. In terms of chemical effects, we identify equilibration of seawater pCO
2
, inorganic CaCO
3
precipitation, and immediate effects during mixing of alkaline solutions with seawater, as important considerations for developing experimental OAE methodologies, and for practical OAE deployment. These initial results underscore the importance of performing more studies of OAE in diverse marine environments, and the need to investigate the coupling between OAE, inorganic processes, and microbial community composition.
Filaments are intrusions of upwelling water into the sea, separated from the surrounding water by fronts. Current knowledge explains the enhanced primary production and phytoplankton growth found in ...frontal areas by external factors like nutrient input. The question is whether this enhancement is also caused by intrinsic factors, i.e. simple mixing without external forcing. In order to study the direct effect of frontal mixing on organisms, disturbing external influx has to be excluded. Therefore mixing was simulated by joining waters originating from “inside” and “outside” the filament in mesocosms (“tanks”). These experiments were conducted during two cruises in the northern Benguela upwelling system in September 2013 and January 2014. The mixed waters reached a much higher net primary production and chlorophyll a (chla) concentration than the original waters already 2-3 days after their merging. The peak in phytoplankton biomass stays longer than the chla peak. After their maxima, primary production rates decreased quickly due to depletion of the nutrients. The increase in colored dissolved organic matter (CDOM) may indicate excretion and degradation. Zooplankton is not quickly reacting on the changed conditions. We conclude that already simple mixing of two water bodies, which occurs generally at fronts between upwelled and ambient water, leads to a short-term stimulation of the phytoplankton growth. However, after the exhaustion of the nutrient stock, external nutrient supply is necessary to maintain the enhanced phytoplankton growth in the frontal area. Based on these data, some generally important ecological factors are discussed as for example nutrient ratios and limitations, silicate requirements and growth rates.
•Surface sediments react quickly with leaking CO2 and release cations into porewaters.•Both carbonate and silicate mineral dissolution lead to neutralization of CO2 in the sediments.•During ...short-term exposure to CO2 no toxic substances were released from North Sea surface sediments.•Porewater composition can be used as a diagnostic indicator of CO2 leakage from storage reservoirs.
Sub-seabed geological CO2 storage is discussed as a climate mitigation strategy, but the impact of any leakage of stored CO2 into the marine environment is not well known. In this study, leakage from a CO2 storage reservoir through near-surface sediments was mimicked for low leakage rates in the North Sea. Field data were combined with laboratory experiments and transport-reaction modelling to estimate CO2 and mineral dissolution rates, and to assess the mobilization of metals in contact with CO2-rich fluids and their potential impact on the environment. We found that carbonate and silicate minerals reacted quickly with the dissolved CO2, increasing porewater alkalinity and neutralizing about 5% of the injected CO2. The release of Ca, Sr, Ba and Mn was mainly controlled by carbonate dissolution, while Fe, Li, B, Mg, and Si were released from silicate minerals, mainly from deeper sediment layers. No toxic metals were released from the sediments and overall the injected CO2 was only detected up to 1 m away from seabed CO2 bubble streams. Our results suggest that low leakage rates of CO2 over short timescales have minimal impact on the benthic environment. However, porewater composition and temperature are effective indicators for leakage detection, even at low CO2 leakage rates.
•A mechanistic explanation is provided for the observed CO2 loss in the sediments.•Reactions of CO2 with the sediment lead to significant heating.•The observations were modeled including reactions ...and losses due to lateral transport.•CO2 leakage will lead to very local effects.
We investigated the effect of an artificial CO2 vent (0.0015−0.037 mol s−1), simulating a leak from a reservoir for carbon capture and storage (CCS), on the sediment geochemistry. CO2 was injected 3 m deep into the seafloor at 120 m depth. With increasing mass flow an increasing number of vents were observed, distributed over an area of approximately 3 m. In situ profiling with microsensors for pH, T, O2 and ORP showed the geochemical effects are localized in a small area around the vents and highly variable. In measurements remote from the vent, the pH reached a value of 7.6 at a depth of 0.06 m. In a CO2 venting channel, pH reduced to below 5. Steep temperature profiles were indicative of a heat source inside the sediment. Elevated total alkalinity and Ca2+ levels showed calcite dissolution. Venting decreased sulfate reduction rates, but not aerobic respiration. A transport-reaction model confirmed that a large fraction of the injected CO2 is transported laterally into the sediment and that the reactions between CO2 and sediment generate enough heat to elevate the temperature significantly. A CO2 leak will have only local consequences for sediment biogeochemistry, and only a small fraction of the escaped CO2 will reach the sediment surface.
•Inherent & added tracers were tested for CO2 leakage attribution & quantification.•Additionally, CO2 leakage was quantified directly by the inverted funnel-technique.•All tracers except 18O were ...capable of attributing the CO2 source.•In total, ∼43 % of total injected CO2 leaked across the seabed.
To inform cost-effective monitoring of offshore geological storage of carbon dioxide (CO2), a unique field experiment, designed to simulate leakage of CO2 from a sub-seafloor storage reservoir, was carried out in the central North Sea. A total of 675 kg of CO2 were released into the shallow sediments (∼3 m below seafloor) for 11 days at flow rates between 6 and 143 kg d-1. A set of natural, inherent tracers (13C, 18O) of injected CO2 and added, non-toxic tracer gases (octafluoropropane, sulfur hexafluoride, krypton, methane) were used to test their applicability for CO2 leakage attribution and quantification in the marine environment. All tracers except 18O were capable of attributing the CO2 source. Tracer analyses indicate that CO2 dissolution in sediment pore waters ranged from 35 % at the lowest injection rate to 41% at the highest injection rate. Direct measurements of gas released from the sediment into the water column suggest that 22 % to 48 % of the injected CO2 exited the seafloor at, respectively, the lowest and the highest injection rate. The remainder of injected CO2 accumulated in gas pockets in the sediment. The methodologies can be used to rapidly confirm the source of leaking CO2 once seabed samples are retrieved.
•The Predicting Leakage Using Multi-phase Equations (PLUME) model is developed.•A new multi-phase multi-scale modelling system utilises PLUME, FVCOM and ERSEM.•CO2 leakage analysis is conducted ...through the new modelling system.•The modelling system is shown to predict observed pCO2 and pH changes.•Spatial impacts of the releases are shown to move with the tide.
Carbon storage is required to keep rising global temperatures below 2°C, meanwhile, storage reservoirs monitoring is required for assurance of early detection of potential leakages. Projects such as QICS and STEMM-CCS have used small in-situ experiments to develop detection techniques, tools, and strategies. Given the expense of experiments it is crucial to develop accurate simulation models that replicate observed behaviours and can be extrapolated to many different scenarios. However, anomalies occur between modelled and experimental data, and a key question has been how can the models be improved?
This has been approached through the development of a complex modelling system to include the effects of coastal hydrodynamics on very localised experiments, with a new multi-phase leakage model – PLUME, integrated into a high-resolution hydrodynamic model, and linked to a carbonate system for CO2 analysis. The resolution of the nested domains range from 2.5 km at the boundaries to approximately 0.5 - 1.0 m at the release sites.
The efficacy of the PLUME model is demonstrated with application to the STEMM-CCS and QICS experimental sites in 120 and 9-12 m water depths respectively. Results show that the newly developed model can predict observed pCO2 and pH changes within acceptable errors. Local effects are shown to be affected greatly by both the resolution and the water currents, with momentary spikes in pCO2 and reductions in pH caused by tidal oscillation. The spatial impacts of the releases are shown to move with the tide, covering a far greater area over a tidal cycle.
•The STEMM-CCS project completed a unique field experiment in the central North Sea.•The experiment mimicked a leakage of CO2 from an offshore storage site.•A custom setup released CO2 into shallow ...sediment at relevant leakage rates.•Diverse established methods and novel technologies characterised the CO2.•The outcomes show such a release can be detected, attributed, and quantified.
Carbon capture and storage (CCS) is a key technology to reduce carbon dioxide (CO2) emissions from industrial processes in a feasible, substantial, and timely manner. For geological CO2 storage to be safe, reliable, and accepted by society, robust strategies for CO2 leakage detection, quantification and management are crucial. The STEMM-CCS (Strategies for Environmental Monitoring of Marine Carbon Capture and Storage) project aimed to provide techniques and understanding to enable and inform cost-effective monitoring of CCS sites in the marine environment. A controlled CO2 release experiment was carried out in the central North Sea, designed to mimic an unintended emission of CO2 from a subsurface CO2 storage site to the seafloor. A total of 675 kg of CO2 were released into the shallow sediments (∼3 m below seafloor), at flow rates between 6 and 143 kg/d. A combination of novel techniques, adapted versions of existing techniques, and well-proven standard techniques were used to detect, characterise and quantify gaseous and dissolved CO2 in the sediments and the overlying seawater. This paper provides an overview of this ambitious field experiment. We describe the preparatory work prior to the release experiment, the experimental layout and procedures, the methods tested, and summarise the main results and the lessons learnt.
According to many prognostic scenarios by the Intergovernmental Panel on Climate Change (IPCC), a scaling-up of carbon dioxide (CO2) capture and storage (CCS) by several orders-of-magnitude is ...necessary to meet the target of ≤2 °C global warming by 2100 relative to preindustrial levels. Since a large fraction of the predicted CO2 storage capacity lies offshore, there is a pressing need to develop field-tested methods to detect and quantify potential leaks in the marine environment. Here, we combine field measurements with numerical models to determine the flow rate of a controlled release of CO2 in a shallow marine setting at about 119 m water depth in the North Sea. In this experiment, CO2 was injected into the sediment at 3 m depth at 143 kg d-1. The new leakage monitoring tool predicts that 91 kg d-1 of CO2 escaped across the seafloor, and that 51 kg d-1 of CO2 were retained in the sediment, in agreement with independent field estimates. The new approach relies mostly on field data collected from ship-deployed technology (towed sensors, Acoustic Doppler current profiler—ADCP), which makes it a promising tool to monitor existing and upcoming offshore CO2 storage sites and to detect and quantify potential CO2 leakage.
•Combination of towed sensors and numerical simulations quantified the CO2 leakage.•64% of CO2 injected at 3-m depth in the sediment leaked into bottom water.•Gas-phase measurements of chemical tracers validated the bubble dissolution model.