Design and construction of new central and forward muon counters for CDF II Artikov, A.; Budagov, J.; Chirikov-Zorin, I. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
02/2005, Letnik:
538, Številka:
1
Journal Article
Recenzirano
Odprti dostop
New scintillation counters have been designed and constructed for the upgradation of the CDF detector at the Fermilab Tevatron in order to complete the muon coverage of the central detector and to ...extend it to a larger pseudorapidity interval. A novel light collection technique using wavelength shifting fibers, together with high-quality polystyrene-based scintillator resulted in compact counters with good and stable light collection efficiency over lengths extending up to 320
cm. Their design and construction is described and results of their initial performance are reported.
A PMT-Block test bench Adragna, P.; Antonaki, A.; Boudagov, I. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
08/2006, Letnik:
564, Številka:
1
Journal Article
Recenzirano
The front-end electronics of the ATLAS hadronic calorimeter (Tile Cal) is housed in a unit, called
PMT-Block. The PMT-Block is a compact instrument comprising a light mixer, a PMT together with its ...divider and a
3-in-1 card, which provides shaping, amplification and integration for the signals. This instrument needs to be qualified before being assembled on the detector. A PMT-Block test bench has been developed for this purpose. This test bench is a system which allows fast, albeit accurate enough, measurements of the main properties of a complete PMT-Block. The system, both hardware and software, and the protocol used for the PMT-Blocks characterization are described in detail in this report. The results obtained in the test of about 10
000 PMT-Blocks needed for the instrumentation of the ATLAS (LHC-CERN) hadronic Tile Calorimeter are also reported.
Testbeam studies of production modules of the ATLAS Tile Calorimeter Alexa, C.; Anderson, K.; Biscarat, C. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
07/2009, Letnik:
606, Številka:
3
Journal Article
Recenzirano
Odprti dostop
We report test beam studies of 11% of the production ATLAS Tile Calorimeter modules. The modules were equipped with production front-end electronics and all the calibration systems planned for the ...final detector. The studies used muon, electron and hadron beams ranging in energy from 3 to 350GeV.
Two independent studies showed that the light yield of the calorimeter was ∼70pe/GeV, exceeding the design goal by 40%. Electron beams provided a calibration of the modules at the electromagnetic energy scale. Over 200 calorimeter cells the variation of the response was 2.4%. The linearity with energy was also measured. Muon beams provided an intercalibration of the response of all calorimeter cells. The response to muons entering in the ATLAS projective geometry showed an RMS variation of 2.5% for 91 measurements over a range of rapidities and modules. The mean response to hadrons of fixed energy had an RMS variation of 1.4% for the modules and projective angles studied. The response to hadrons normalized to incident beam energy showed an 8% increase between 10 and 350GeV, fully consistent with expectations for a noncompensating calorimeter. The measured energy resolution for hadrons of σ/E=52.9%/E⊕5.7% was also consistent with expectations.
Other auxiliary studies were made of saturation recovery of the readout system, the time resolution of the calorimeter and the performance of the trigger signals from the calorimeter.
The response of pions and protons in the energy range of 20–180
GeV, produced at CERN's SPS H8 test-beam line in the ATLAS iron–scintillator Tile hadron calorimeter, has been measured. The test-beam ...configuration allowed the measurement of the longitudinal shower development for pions and protons up to 20 nuclear interaction lengths. It was found that pions penetrate deeper in the calorimeter than protons. However, protons induce showers that are wider laterally to the direction of the impinging particle. Including the measured total energy response, the pion-to-proton energy ratio and the resolution, all observations are consistent with a higher electromagnetic energy fraction in pion-induced showers. The data are compared with GEANT4 simulations using several hadronic physics lists. The measured longitudinal shower profiles are described by an analytical shower parametrization within an accuracy of 5–10%. The amount of energy leaking out behind the calorimeter is determined and parametrized as a function of the beam energy and the calorimeter depth. This allows for a leakage correction of test-beam results in the standard projective geometry.
We present the result of a search for a massive color-octet vector particle, (e.g. a massive gluon) decaying to a pair of top quarks in proton-antiproton collisions with a center-of-mass energy of ...1.96 TeV. This search is based on 1.9 fb super(-1) of data collected using the CDF detector during Run II of the Tevatron at Fermilab. We study tt events in the lepton + jets channel with at least one b-tagged jet. A massive gluon is characterized by its mass, decay width, and the strength of its coupling to quarks. These parameters are determined according to the observed invariant mass distribution of top quark pairs. We set limits on the massive gluon coupling strength for masses between 400 and 800 GeV/c super(2) and width-to-mass ratios between 0.05 and 0.50. The coupling strength of the hypothetical massive gluon to quarks is consistent with zero within the explored parameter space.
We report the results of a study of multi-muon events produced at the Fermilab Tevatron collider and acquired with the CDF II detector using a dedicated dimuon trigger. The production cross section ...and kinematics of events in which both muon candidates are produced inside the beam pipe of radius 1.5 cm are successfully modeled by known processes which include heavy flavor production. In contrast, we are presently unable to fully account for the number and properties of the remaining events, in which at least one muon candidate is produced outside of the beam pipe, in terms of the same understanding of the CDF II detector, trigger, and event reconstruction.
The European Physical Journal C—Particles and Fields—publishes scientific manuscripts of relevance to the scientific community following careful and strict peer reviewing and, whenever appropriate ...and necessary, through discussion with the authors, so as to optimise scientific content and style of presentation prior to publication. In some cases significant disagreement between authors and referees (and/or editors) of the journal cannot be resolved despite all efforts and best of intentions. While the journal—notwithstanding any appeals—retains the right to reject such manuscripts, the editors of this journal may decide, in cases deemed of exceptional interest and potential significance for the field, to accept the manuscript for publication, to amend it by “comments” of the editor(s) in charge and, if appropriate, by a “reply” of the authors of the commented manuscript.
The present comment is on “Study of multi-muon events produced in
interactions at
TeV” by T. Aaltonen et al. (the CDF Collaboration, Eur. Phys. J. C,
2010
, doi:
10.1140/epjc/s10052-010-1336-0
).