Additive manufacturing (AM) technologies appear as a paradigm for scalable manufacture of electrochemical energy storage (EES) devices, where complex 3D architectures are typically required but are ...hard to achieve using conventional techniques. The combination of these technologies and innovative material formulations that maximize surface area accessibility and ion transport within electrodes while minimizing space are of growing interest. Herein, aqueous inks composed of atomically thin (1–3 nm) 2D Ti3C2Tx
with large lateral size of about 8 µm possessing ideal viscoelastic properties are formulated for extrusion‐based 3D printing of freestanding, high specific surface area architectures to determine the viability of manufacturing energy storage devices. The 3D‐printed device achieves a high areal capacitance of 2.1 F cm−2 at 1.7 mA cm−2 and a gravimetric capacitance of 242.5 F g−1 at 0.2 A g−1 with a retention of above 90% capacitance for 10 000 cycles. It also exhibits a high energy density of 0.0244 mWh cm−2 and a power density of 0.64 mW cm−2 at 4.3 mA cm−2. It is anticipated that the sustainable printing and design approach developed in this work can be applied to fabricate high‐performance bespoke multiscale and multidimensional architectures of functional and structural materials for integrated devices in various applications.
A current‐collector‐free, interdigitated‐supercapacitor device is manufactured by 3D printing with water‐based MXene ink. Simple modifications to the ink synthesis and formulation provide unique rheological properties, which enable the printability of 3D structures of up to 25 layers high. The final structures demonstrate high specific area, resulting in high areal capacitance of the micro‐supercapacitor device.
Laminar membranes of two-dimensional materials are excellent candidates for applications in water filtration due to the formation of nanocapillaries between individual crystals that can exhibit a ...molecular and ionic sieving effect, while allowing high water flux. This approach has been exemplified previously with graphene oxide, however these membranes suffer from swelling when exposed to liquid water, leading to low salt rejection and reducing their applicability for desalination applications. Here, we demonstrate that by producing thin (∼5 μm) laminar membranes of exfoliated molybdenum disulfide (MoS2) in a straightforward and scalable process, followed by a simple chemical functionalization step, we can efficiently reject ∼99% of the ions commonly found in seawater, while maintaining water fluxes significantly higher (∼5 times) than those reported for graphene oxide membranes. These functionalized MoS2 membranes exhibit excellent long-term stability with no swelling and consequent decrease in ion rejection, when immersed in water for periods exceeding 6 months. Similar stability is observed when exposed to organic solvents, indicating that they are ideal for a variety of technologically important filtration applications.
Van der Waals heterostructures form a unique class of layered artificial solids in which physical properties can be manipulated through controlled composition, order and relative rotation of adjacent ...atomic planes. Here we use atomic-resolution transmission electron microscopy to reveal the lattice reconstruction in twisted bilayers of the transition metal dichalcogenides, MoS
and WS
. For twisted 3R bilayers, a tessellated pattern of mirror-reflected triangular 3R domains emerges, separated by a network of partial dislocations for twist angles θ < 2°. The electronic properties of these 3R domains, featuring layer-polarized conduction-band states caused by lack of both inversion and mirror symmetry, appear to be qualitatively different from those of 2H transition metal dichalcogenides. For twisted 2H bilayers, stable 2H domains dominate, with nuclei of a second metastable phase. This appears as a kagome-like pattern at θ ≈ 2°, transitioning at θ → 0 to a hexagonal array of screw dislocations separating large-area 2H domains. Tunnelling measurements show that such reconstruction creates strong piezoelectric textures, opening a new avenue for engineering of 2D material properties.
The liquid-phase exfoliation of tin(II) sulfide to produce SnS nanosheets in N-methyl-2-pyrrolidone is reported. The material is characterized by Raman spectroscopy, atomic force microscopy, ...lattice-resolution scanning transmission electron microscope imaging, and energy dispersive X-ray spectrum imaging. Quantum chemical calculations on the optoelectronic characteristics of bulk and 10-layer down to monolayer SnS have been performed using a quantum chemical density functional tight-binding approach. The optical properties of the SnS and centrifugally fractionated SnS nanosheet dispersions were compared to that predicted by theory. Through centrifugation, bilayer SnS nanosheets can be produced size-selectively. The scalable solution processing of semiconductor SnS nanosheets is the key to their commercial exploitation and is potentially an important step toward the realization of a future electronics industry based on two-dimensional materials.
The celebrated electronic properties of graphene have opened the way for materials just one atom thick to be used in the post-silicon electronic era. An important milestone was the creation of ...heterostructures based on graphene and other two-dimensional crystals, which can be assembled into three-dimensional stacks with atomic layer precision. Such layered structures have already demonstrated a range of fascinating physical phenomena, and have also been used in demonstrating a prototype field-effect tunnelling transistor, which is regarded to be a candidate for post-CMOS (complementary metal-oxide semiconductor) technology. The range of possible materials that could be incorporated into such stacks is very large. Indeed, there are many other materials with layers linked by weak van der Waals forces that can be exfoliated and combined together to create novel highly tailored heterostructures. Here, we describe a new generation of field-effect vertical tunnelling transistors where two-dimensional tungsten disulphide serves as an atomically thin barrier between two layers of either mechanically exfoliated or chemical vapour deposition-grown graphene. The combination of tunnelling (under the barrier) and thermionic (over the barrier) transport allows for unprecedented current modulation exceeding 1 × 10(6) at room temperature and very high ON current. These devices can also operate on transparent and flexible substrates.
Graphene oxide membranes show exceptional molecular permeation properties, with promise for many applications. However, their use in ion sieving and desalination technologies is limited by a ...permeation cutoff of ∼9 Å (ref. 4), which is larger than the diameters of hydrated ions of common salts. The cutoff is determined by the interlayer spacing (d) of ∼13.5 Å, typical for graphene oxide laminates that swell in water. Achieving smaller d for the laminates immersed in water has proved to be a challenge. Here, we describe how to control d by physical confinement and achieve accurate and tunable ion sieving. Membranes with d from ∼9.8 Å to 6.4 Å are demonstrated, providing a sieve size smaller than the diameters of hydrated ions. In this regime, ion permeation is found to be thermally activated with energy barriers of ∼10-100 kJ mol
depending on d. Importantly, permeation rates decrease exponentially with decreasing sieve size but water transport is weakly affected (by a factor of <2). The latter is attributed to a low barrier for the entry of water molecules and large slip lengths inside graphene capillaries. Building on these findings, we demonstrate a simple scalable method to obtain graphene-based membranes with limited swelling, which exhibit 97% rejection for NaCl.
Liquid- phase exfoliation (LPE) is the principal method of producing two-dimensional (2D) materials such as graphene in large quantities with a good balance between quality and cost and is now widely ...adopted by both the academic and industrial sectors. The fragmentation and exfoliation mechanisms involved have usually been simply attributed to the force induced by ultrasound and the interaction with the solvent molecules. Nonetheless, little is known about how they actually occur, i.e., how thick and large graphite crystals can be exfoliated into thin and small graphene flakes. Here, we demonstrate that during ultrasonic LPE the transition from graphite flakes to graphene takes place in three distinct stages. First, sonication leads to the rupture of large flakes and the formation of kink band striations on the flake surfaces, primarily along zigzag directions. Second, cracks form along these striations, and together with intercalation of solvent, lead to the unzipping and peeling off of thin graphite strips that in the final stage are exfoliated into graphene. The findings will be of great value in the quest to optimize the lateral dimensions, thickness, and yield of graphene and other 2D materials in large-scale LPE for various applications.
Abstract
The rise of two-dimensional (2D) crystalline superconductors has opened a new frontier of investigating unconventional quantum phenomena in low dimensions. However, despite the enormous ...advances achieved towards understanding the underlying physics, practical device applications like sensors and detectors using 2D superconductors are still lacking. Here, we demonstrate nonreciprocal antenna devices based on atomically thin NbSe
2
. Reversible nonreciprocal charge transport is unveiled in 2D NbSe
2
through multi-reversal antisymmetric second harmonic magnetoresistance isotherms. Based on this nonreciprocity, our NbSe
2
antenna devices exhibit a reversible nonreciprocal sensitivity to externally alternating current (AC) electromagnetic waves, which is attributed to the vortex flow in asymmetric pinning potentials driven by the AC driving force. More importantly, a successful control of the nonreciprocal sensitivity of the antenna devices has been achieved by applying electromagnetic waves with different frequencies and amplitudes. The device’s response increases with increasing electromagnetic wave amplitude and exhibits prominent broadband sensing from 5 to 900 MHz.
Formamides are important feedstocks for the manufacture of many fine chemicals. State‐of‐the‐art synthesis of formamides relies on the use of an excess amount of reagents, giving copious waste and ...thus poor atom‐economy. Here, we report the first example of direct synthesis of N‐formamides by coupling two challenging reactions, namely reductive amination of carbonyl compounds, particularly biomass‐derived aldehydes and ketones, and fixation of CO2 in the presence of H2 over a metal‐organic framework supported ruthenium catalyst, Ru/MFM‐300(Cr). Highly selective production of N‐formamides has been observed for a wide range of carbonyl compounds. Synchrotron X‐ray powder diffraction reveals the presence of strong host‐guest binding interactions via hydrogen bonding and parallel‐displaced π⋅⋅⋅π interactions between the catalyst and adsorbed substrates facilitating the activation of substrates and promoting selectivity to formamides. The use of multifunctional porous catalysts to integrate CO2 utilisation in the synthesis of formamide products will have a significant impact in the sustainable synthesis of feedstock chemicals.
Ru/MFM‐300(Cr) was used as catalyst for the one‐pot N‐formylation of both aldehydes and ketones (30 substrates) in high yield. Synchrotron PXRD reveals the activation of carbonyl compounds via confined binding within MFM‐300(Cr). Nuclear magnetic resonance (NMR) spectroscopic analysis and control experiments suggest formate species as the intermediate derived from the reduction of CO2 and reveal the possible reaction pathway.