The Role of Polarization in Photocatalysis Chen, Fang; Huang, Hongwei; Guo, Lin ...
Angewandte Chemie International Edition,
July 22, 2019, Letnik:
58, Številka:
30
Journal Article
Recenzirano
Semiconductor photocatalysis as a desirable technology shows great potential in environmental remediation and renewable energy generation, but its efficiency is severely restricted by the rapid ...recombination of charge carriers in the bulk phase and on the surface of photocatalysts. Polarization has emerged as one of the most effective strategies for addressing the above‐mentioned issues, thus effectively promoting photocatalysis. This review summarizes the recent advances on improvements of photocatalytic activity by polarization‐promoted bulk and surface charge separation. Highlighted is the recent progress in charge separation advanced by different types of polarization, such as macroscopic polarization, piezoelectric polarization, ferroelectric polarization, and surface polarization, and the related mechanisms. Finally, the strategies and challenges for polarization enhancement to further enhance charge separation and photocatalysis are discussed.
Polar opposites: Macroscopic polarization, piezoelectric polarization, ferroelectric polarization, and surface polarization have emerged as promising strategies for accelerating the separation of photogenerated charge carriers either in the bulk phase or on the surface of semiconductor photocatalysts. Recent progress as well as future challenges are discussed.
Semiconductor photocatalysis acts as a sustainable green technology to convert solar energy for environmental purification and production of renewable energy. However, the current photocatalysts ...suffer from inefficient photoabsorption, rapid recombination of photogenerated electrons and holes, and inadequate surface reactive sites. Introduction of oxygen vacancies (OVs) in photocatalysts has been demonstrated to be an efficacious strategy to solve these issues and improve photocatalytic efficiency. This review systematically summarizes the recent progress in the oxygen vacant semiconductor photocatalysts. Firstly, the formation and characterizations of OVs in semiconductor photocatalysts are briefly introduced. Then, highlighted are the roles of OVs in the photocatalytic reactions of three types of typical oxygen‐containing semiconductors, including metal oxides (TiO2, ZnO, WO3, W18O49, MoO3, BiO2‐x, SnO2, etc), hydroxides (In(OH)3, Ln(OH)3 (Ln=La, Pr, and Nd), Layered double hydroxides) and oxysalts (bismuth‐based oxysalts and others) photocatalysts. Moreover, the advanced photocatalytic applications of oxygen vacant semiconductor photocatalysts, such as pollutant removal, H2 production, CO2 reduction, N2 fixation and organic synthesis are systematically summarized. Finally, an overview on the current challenges and a prospective on the future of oxygen vacant materials is proposed.
Oxygen vacancies serve as the most effective defect engineering tactic to improve the photoabsorption, charge separation, and surface catalytic capability of photocatalysts. Here, three types of oxygen vacant semiconductors, including metal oxides (TiO2, ZnO, WO3, MoO3, etc), hydroxides (In(OH)3, Ln(OH)3 (Ln=La, Pr, and Nd), layered double hydroxides) and oxysalts (bismuth‐based oxysalts and others) photocatalysts, with diverse photocatalytic applications are summarized.
Semiconductor‐based photocatalysis as a productive technology furnishes a prospective solution to environmental and renewable energy issues, but its efficiency greatly relies on the effective bulk ...and surface separation of photoexcited charge carriers. Exploitation of atomic‐level strategies allows in‐depth understanding on the related mechanisms and enables bottom‐up precise design of photocatalysts, significantly enhancing photocatalytic activity. Herein, the advances on atomic‐level charge separation strategies toward developing robust photocatalysts are highlighted, elucidating the fundamentals of charge separation and transfer processes and advanced probing techniques. The atomic‐level bulk charge separation strategies, embodied by regulation of charge movement pathway and migration dynamic, boil down to shortening the charge diffusion distance to the atomic‐scale, establishing atomic‐level charge transfer channels, and enhancing the charge separation driving force. Meanwhile, regulating the in‐plane surface structure and spatial surface structure are summarized as atomic‐level surface charge separation strategies. Moreover, collaborative strategies for simultaneous manipulation of bulk and surface photocharges are also introduced. Finally, the existing challenges and future prospects for fabrication of state‐of‐the‐art photocatalysts are discussed on the basis of a thorough comprehension of atomic‐level charge separation strategies.
Semiconductor photocatalytic efficiency greatly relies on effective charge separation. The recent progress of atomic‐level strategies for promoting charge separation and migration in the bulk, on the surface, and both bulk and surface of a photocatalyst are highlighted and a guideline for the bottom‐up design of high‐performance photocatalysts suggested.
Bismuth tungstate (Bi2WO6) has become a research hotspot due to its potential in photocatalytic energy conversion and environmental purification. Nevertheless, the limited light absorption and fast ...recombination of photogenerated carriers hinder the further improvement of the photocatalytic performance of Bi2WO6. Herein, we provide a systematic review for the recent advances on Bi2WO6-based photocatalysts. It starts with the crystal structure, optical properties and photocatalytic fundamentals of Bi2WO6. Then, we focus on the modification strategies of Bi2WO6 based on morphology control, atomic modulation and composite fabrication for diverse photocatalytic applications, such as organic synthesis, water splitting, CO2 reduction, water treatment, air purification, bacterial inactivation, etc. Finally, some current challenges and future development prospects are proposed. We expect that this review can provide a useful reference and guidance for the development of efficient Bi2WO6 photocatalysts.
This review provides a systematic summary on the recent advances of Bi2WO6-based photocatalysts in fields of energy and environment. More importantly, different modification strategies for improving the photocatalytic activity of Bi2WO6 were discussed.
Prompt recombination of photogenerated electrons and holes in bulk and on the surface of photocatalysts harshly impedes the photocatalytic efficiency. However, the simultaneous manipulation of ...photocharges in the two locations is challenging. Herein, the synchronous promotion of bulk and surface separation of photoinduced charges for prominent CO2 photoreduction by coupling macroscopic spontaneous polarization and surface oxygen vacancies (OVs) of BiOIO3 single crystals is reported. The oriented growth of BiOIO3 single‐crystal nanostrips along the 001 direction, ensuing substantial well‐aligned IO3 polar units, renders a large enhancement for the macroscopic polarization electric field, which is capable of driving the rapid separation and migration of charges from bulk to surface. Meanwhile the introduction of surface OVs establishes a local electric field for charge migration to catalytic sites on the surface of BiOIO3 nanostrips. Highly polarized BiOIO3 nanostrips with ample OVs demonstrate outstanding CO2 reduction activity for CO production with a rate of 17.33 µmol g−1 h−1 (approximately ten times enhancement) without any sacrificial agents or cocatalysts, being one of the best CO2 reduction photocatalysts in the gas–solid system reported so far. This work provides an integrated solution to governing charge movement behavior on the basis of collaborative polarization from bulk and surface.
Collaborative polarization by macroscopic spontaneous polarization and surface oxygen vacancies induces efficient bulk and surface charge separation of BiOIO3 nanostrips, which gives rise to extraordinary CO2 photoreduction activity with a CO evolution rate of 17.33 µmol g−1 h−1, over ten times that of BiOIO3 nanoparticles, also outperforming most previously reported high‐performance photocatalysts.
Solar‐driven conversion of CO2 into high value‐added fuels is expected to be an environmental‐friendly and sustainable approach for relieving the greenhouse gas effect and countering energy crisis. ...Metal sulfide semiconductors with wide photoresponsive range and favorable band structures are suitable photocatalysts for CO2 photoreduction. This review summarizes the recent progress on metal sulfide semiconductors for photocatalytic CO2 reduction. First, the fundamentals, mechanisms and some principles, like product selectivity, of photocatalytic CO2 reduction are introduced. Then, according to the elemental composition, the metal sulfide photocatalysts applied for CO2 reduction are classified into binary (CdS, ZnS, MoS2, SnS2, Bi2S3, In2S3,Cu2S, NiS/NiS2, and CoS2), ternary (ZnIn2S4, CdIn2S4, CuInS2, Cu3SnS4, and CuGaS2), and quaternary (Cu2ZnSnS4) systems, in which their crystal structures, photochemical characteristics, and photocatalytic CO2 reduction applications are systematically demonstrated. Especially, the diverse modification strategies for improving the activity and product selectivity of photocatalytic CO2 reduction on these metal sulfides are summarized. Finally, the current challenges and future directions for the development of metal sulfide photocatalysts for CO2 reduction are proposed. This review is expected to serve as a powerful reference for exploiting high‐efficiency metal sulfide photocatalysts for CO2 conversion and furthering related mechanism understanding.
Metal sulfide semiconductors present unique optical/electronic characteristics, which are advantageous for CO2 photoreduction. The advancements in binary, ternary, and quaternary metal sulfide photocatalysts in CO2 photoreduction are elaborately summarized, and the effects of various modification strategies on the reduction activity and product selectivity are highlighted, providing a reference for development of efficient metal sulfides for photocatalytic CO2 reduction to carbonaceous fuels.
Reactive oxygen species (ROS) as green oxidants are of great importance for environmental and biological applications. Photocatalysis is one of the major routes for ROS evolution, which is seriously ...restricted by rapid charge recombination. Herein, piezocatalysis and photocatalysis (i.e., piezo–photocatalysis) are coupled to efficiently produce superoxide radicals (•O2−), hydrogen peroxide (H2O2), and hydroxyl radicals (•OH) via oxygen reduction reaction (ORR), by using Bi4NbO8X (X = Cl, Br) single crystalline nanoplates. Significantly, the piezo‐photocatalytic process leads to the highest ORR performance of the Bi4NbO8Br nanoplates, exhibiting •O2−, H2O2, and •OH evolution rates of 98.7, 792, and 33.2 µmol g−1 h−1, respectively. The formation of a polarized electric field and band bending allows directional separation of charge carriers, promoting the catalytic activity. Furthermore, the reductive active sites are found enriched on all the facets in the piezo–photocatalytic process, also contributing to the ORR. By piezo–photodeposition of Pt to artificially plant reductive reactive sites, the Bi4NbO8Br plates demonstrate largely enhanced photocatalytic H2 production activity with a rate of 203.7 µmol g−1 h−1. The present work advances piezo–photocatalysis as a new route for ROS generation, but also discloses the potential of piezo–photocatalytic active sites enriching for H2 evolution.
Efficient charge separation and enriched reductive reactive sites are synchronously achieved by coupling piezocatalysis and photocatalysis of layered piezoelectric semiconductor Bi4NbO8X (X = Cl, Br) single crystalline nanoplates, which results in the efficient production of reactive oxygen species (•O2−, H2O2, and •OH) and hydrogen.
Thin layer fabrication and crystal facet engineering favor the prompt charge transfer from bulk to the surface of a material and spatial charge separation among different facets, tremendously ...benefitting photocatalytic activity. However, the thickness and surface facet composition are considered as two entwined characteristics of layered materials with well‐defined and tunable shapes, which possess great promise to achieve the simultaneous manipulation of charge transfer and spatial separation. Herein, it is demonstrated that one solution for the aforementioned issue by controllably regulating the surface {010}/{100} facet junctions of a layered thickness‐tunable bismuth‐based material, BiOIO3. The attenuation in thickness of BiOIO3 nanoplates shortens the diffusion pathway of charge carriers, and more importantly the tuning of nanolayer thickness renders the ratio variation of the top {010} facet to the lateral {100} facet, which dominates the spatial separation of photogenerated electrons and holes. As a result, the highest CO evolution rate from CO2 reduction over BiOIO3 nanoplates with the optimal thickness and ratio of exposed facets reaches 5.42 µmol g−1 h−1, over 300% that of the bulk counterpart (1.77 µmol g−1 h−1). This work paves a new way for governing charge movement behaviors on the basis of the synergistic engineering of layer structure and exposing facets.
The interlayer charge migration and surface spatial charge separation are synchronously optimized through controllable regulation of the {010}/{100} facet junctions of a layered bismuth‐based material—BiOIO3, which results in efficient photocatalytic CO2 reduction for CO evolution.
This paper proposes an image-based method for automated rock fracture segmentation and fracture trace quantification. It is integrated using a CNN-based model named FraSegNet, a skeleton extraction ...algorithm, and a chain code-based polyline approximation algorithm. A rock tunnel fracture database with a total of 3,000 images of rock tunnel faces is established and selected to train and test the FraSegNet model. A comparison study is further conducted and shows that the FraSegNet model shows advanced performance in pixel-level fracture trace map extraction and noise reduction compared to other deep learning approaches and traditional image edge detection algorithms. Next, the skeletons of the predicted fracture trace maps are extracted and the corresponding polyline for each fracture skeleton is thus obtained and output as a text file composed of key nodes coordinates. The fracture trace characteristics (trace length, dip angle, density, and intensity) are acquired using node-based files. The quantitative evaluation of the proposed method illustrates that it can extract trace occurrences effectively and accurately. A case study of three full scale tunnel sections demonstrates the proposed method to be an efficient approach for acquiring and evaluating 2D fracture occurrences of under-construction rock tunnel faces.
Display omitted
•A CNN-based model was developed for automated fracture trace map extraction.•Achieved automated evaluation of fracture trace statistics via an integrated approach.•Evaluation indexes were defined to assess the performances of the proposed method.•Field applicability was demonstrated with three full scale tunnel sections.
Leukemoid reaction complicated by thrombocytopenia is rare, usually seen in patients with malignant conditions, and is often associated with poor prognosis. Here, the case of a 28-year-old healthy ...female without exceptional past medical history, who suffered from severe vaginal infection, is reported. Although symptoms improved, the white blood cell (WBC) count continued to increase up to 78 460 cells/µl, however, the patient continued to improve and the outcome was good. The case revealed that an increasing WBC count may not change in synchrony with clinical symptoms. When faced with this scenario, procalcitonin measurements may play an important role in differentiating diagnosis and guiding treatment.