Alloys with ultra-high strength and sufficient ductility are highly desired for modern engineering applications but difficult to develop. Here we report that, by a careful controlling alloy ...composition, thermomechanical process, and microstructural feature, a Co-Cr-Ni-based medium-entropy alloy (MEA) with a dual heterogeneous structure of both matrix and precipitates can be designed to provide an ultra-high tensile strength of 2.2 GPa and uniform elongation of 13% at ambient temperature, properties that are much improved over their counterparts without the heterogeneous structure. Electron microscopy characterizations reveal that the dual heterogeneous structures are composed of a heterogeneous matrix with both coarse grains (10∼30 μm) and ultra-fine grains (0.5∼2 μm), together with heterogeneous L1
-structured nanoprecipitates ranging from several to hundreds of nanometers. The heterogeneous L1
nanoprecipitates are fully coherent with the matrix, minimizing the elastic misfit strain of interfaces, relieving the stress concentration during deformation, and playing an active role in enhanced ductility.
High-temperature superconductivity emerges on doping holes or electrons into antiferromagnetic copper oxides. The large energy scale of magnetic excitations, for example, compared with phonon ...energies, is thought to drive superconductivity with high transition temperatures (Tc). Comparing high-energy magnetic excitations of hole- and electron-doped superconductors provides an opportunity to test this hypothesis. Here, we use resonant inelastic X-ray scattering at the Cu L3-edge to reveal collective excitations in the electron-doped cuprate Nd2xCexCuO4. Surprisingly, magnetic excitations harden signicantly across the antiferromagnetic high-temperature superconductivity phase boundary despite short-ranged antiferromagnetic correlations, in contrast to the hole-doped cuprates. Furthermore, we nd an unexpected branch of collective modes in superconducting compounds, absent in hole-doped cuprates. These modes emanate from the zone centre and possess a higher temperature scale than Tc, signalling a distinct quantum phase. Despite their dierences, the persistence of magnetic excitations and the existence of a distinct quantum phase are apparently universal in both hole- and electron-doped cuprates.
Because the cuprate superconductors are doped Mott insulators, it would be advantageous to solve even a toy model that exhibits both Mottness and superconductivity. We consider the Hatsugai–Kohmoto ...model1,2, an exactly solvable system that is a prototypical Mott insulator. Upon either doping or reducing the interaction strength, our exact calculations show that the system becomes a non-Fermi liquid metal with a superconducting instability. In the presence of a weak pairing interaction, the instability produces a thermal transition to a superconducting phase, which is distinct from the traditional state described by Bardeen–Cooper–Schrieffer (BCS) theory, as evidenced by a gap-to-transition temperature ratio exceeding the universal BCS limit. The elementary excitations of this superconductor are not Bogoliubov quasiparticles but rather superpositions of doublons and holons, composite excitations that show that the superconducting ground state of the doped Mott insulator inherits the non-Fermi liquid character of the normal state. An unexpected feature of this model is that it exhibits a superconductivity-induced transfer of spectral weight from high to low energies, as seen in the cuprates3, as well as a suppression of the superfluid density relative to that in BCS theory.The Mott insulator ground state is a crucial feature of high-temperature superconductors such as the cuprates. Here, the authors find an exactly solvable model that contains both superconductivity and Mottness.
The present work investigated the effect of strain rates (10−3 to 103s−1) on the deformation behaviour of a twinning-induced plasticity (TWIP) steel. The strain rate sensitivity was studied in terms ...of instantaneous strain rate sensitivity (ISRS) and strain rate sensitivity of work-hardening (SRSW). While ISRS concerns the instantaneous flow stress change upon strain rate jump, SRSW deals with the subsequent modification in microstructure evolution, i.e. change of work-hardening rate. The present TWIP steel demonstrates a positive ISRS which remains stable during deformation and a negative SRSW, i.e. lower work-hardening rate at higher strain rate. Synchrotron X-ray diffraction experiments indicate that the negative SRSW should be attributed to the suppression of dislocations and deformation twins at high strain rate. This unexpected finding is different to conventional face-centred cubic (fcc) metals which generally show enhanced work-hardening rate at higher strain rate. A constitutive model which is strain rate- and temperature-dependent is developed to explain the stable ISRS and the negative SRSW. The modelling results reveal that the stable ISRS should be attributed to the thermally-activated dislocation motion dominated by interstitial carbon atoms and the negative SRSW should be due to the suppression of the dislocations and deformation twins caused by the adiabatic heating associated with high strain rate deformation.
An experimental setup has been constructed to measure the collection efficiency (CE) of sub-micrometer aerosol particles by cloud droplets. Droplets of a dilute aqueous ammonium sulfate solution with ...an average radius of 21.6 mu m fall freely into a chamber and collide with sub-micrometer polystyrene latex (PSL) sphere particles of known sizes and concentrations. Two relative humidity (RH) conditions, 15 plus or minus 3 % and 88 plus or minus 3 %, hereafter termed "low" and "high", respectively, were varied with different particles sizes and concentrations. After passing through the chamber, the droplets and aerosol particles were sent to the Particle Analysis by Laser Mass Spectrometry (PALMS) instrument to determine chemical compositions on a single-droplet basis. "Coagulated droplets" (droplets that collected aerosols) had mass spectra that contained signatures from both an aerosol particle and a droplet residual. CE values range from 2.0 10-1 to 1.6 for the low-RH case and from 1.5 10-2 to 9.0 10-2 for the high-RH case. CE values were, within experimental uncertainty, independent of the aerosol concentrations. CE values in this study were found to be in agreement with previous experimental and theoretical studies. To our knowledge, this is the first collection experiment performed on a single-droplet basis with atmospherically relevant conditions such as droplet sizes, droplet charges and flow.
Multiferroics have attracted strong interest for potential applications where electric fields control magnetic order. The ultimate speed of control via magnetoelectric coupling, however, remains ...largely unexplored. Here, we report an experiment in which we drove spin dynamics in multiferroic TbMnO3 with an intense few-cycle terahertz (THz) light pulse tuned to resonance with an electromagnon, an electric-dipole active spin excitation. We observed the resulting spin motion using time-resolved resonant soft x-ray diffraction. Our results show that it is possible to directly manipulate atomic-scale magnetic structures with the electric field of light on a sub-picosecond time scale.
Strange metallicity in the doped Hubbard model Huang, Edwin W; Sheppard, Ryan; Moritz, Brian ...
Science (American Association for the Advancement of Science),
11/2019, Letnik:
366, Številka:
6468
Journal Article
Recenzirano
Odprti dostop
Strange or bad metallic transport, defined by incompatibility with the conventional quasiparticle picture, is a theme common to many strongly correlated materials, including high-temperature ...superconductors. The Hubbard model represents a minimal starting point for modeling strongly correlated systems. Here we demonstrate strange metallic transport in the doped two-dimensional Hubbard model using determinantal quantum Monte Carlo calculations. Over a wide range of doping, we observe resistivities exceeding the Mott-Ioffe-Regel limit with linear temperature dependence. The temperatures of our calculations extend to as low as 1/40 of the noninteracting bandwidth, placing our findings in the degenerate regime relevant to experimental observations of strange metallicity. Our results provide a foundation for connecting theories of strange metals to models of strongly correlated materials.
This study investigated seasonal variations in the mass concentration and chemical composition of ambient aerosols observed at three stations (coastal, mountainous, and downtown sites) in northern ...Taiwan from March 2009 to February 2012. The results show that the major aerosol components include ammonium, sulfate, nitrate, sea salt, dust, organic carbon, and elemental carbon, whereas the mass fraction of each species depends on the sampling location and season. A significant correlation (r = 0.7–0.8) was observed in aerosol concentrations measured at the respective stations, indicating that aerosol concentrations were dominated by regional‐scale factors. Ammonium, sulfate, and nitrate consistently reached respective peak values in the spring in conjunction with dust particle levels. This shows that the transport of dust and particulate air pollutants from the Asian continent has affected the atmospheric environment in this area. Distinct seasonality was observed for sea salt and secondary organic carbon (SOC): sea salt levels peaked in the autumn, whereas SOC levels peaked in the summer, implying that their sources were regulated by independent seasonal factors. Correlation between sea salt concentration and surface wind speed was derived from coastal measurements and showed a high value for the wind speed sensitivity parameter of around 0.37 for our location. In addition, it was revealed that the SOC concentration in aerosols was positively correlated with oxidant photolysis index (Ox × UVB), suggesting that the SOC seasonality was dominated by hydroxyl radical production.
Key Points
Inorganic particulate pollutants and dust consistently peaked in the spring due to Asian outflow effects
Ambient concentrations of sea salt particles were exponentially correlated with surface wind speeds
The production of secondary organic aerosols was dominated by the photolysis of total oxidants
Nearly 400,000 people worldwide are known to have been infected with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) beginning in December 2019. The virus has now spread to over 168 ...countries including the United States, where the first cluster of cases was observed in the Seattle metropolitan area in Washington. Given the rapid increase in the number of cases in many localities, the availability of accurate, high-throughput SARS-CoV-2 testing is vital to efforts to manage the current public health crisis. In the course of optimizing SARS-CoV-2 testing performed by the University of Washington Clinical Virology Lab (UW Virology Lab), we evaluated assays using seven different primer-probe sets and one assay kit. We found that the most sensitive assays were those that used the E-gene primer-probe set described by Corman et al. (V. M. Corman, O. Landt, M. Kaiser, R. Molenkamp, et al., Euro Surveill 25:2000045, 2020, https://doi.org/10.2807/1560-7917.ES.2020.25.3.2000045) and the N2 set developed by the CDC (Division of Viral Diseases, Centers for Disease Control and Prevention, 2020, https://www.cdc.gov/coronavirus/2019-ncov/downloads/rt-pcr-panel-primer-probes.pdf). All assays tested were found to be highly specific for SARS-CoV-2, with no cross-reactivity with other respiratory viruses observed in our analyses regardless of the primer-probe set or kit used. These results will provide valuable information to other clinical laboratories who are actively developing SARS-CoV-2 testing protocols at a time when increased testing capacity is urgently needed worldwide.