Günümüzden yaklaşık 11 bin yıl önceleri Güneybatı Asya genelinde ilk köy yerleşmeleri kurulmaya başlamış, geçici tarzdaki yapılaşma zaman içinde yerini kalıcı yapılara ve ilk köy tarzı yerleşmelere ...bırakmıştır. Bu süreçte gerek yapı malzemesi gerek yapım teknikleri gerekse yerleşme düzeninin geliştiği görülür. Söz konusu gelişme, yerleşmelerin içinde yer aldığı kültürel ve fiziksel coğrafyaya göre biçimlenmiştir. Bu yazıda ele aldığımız yerleşme düzeni örneği, Orta Anadolu Bölgesi’nin güneyinde, Kapadokya kesiminde yer alan, bölgenin en eski yerleşmesi Aşıklı Höyük’te ortaya çıkan dokudur. MÖ 9. binyılın ortalarında kurulan kalıcı yerleşme, kendine özgü bağlamı içerisinde biçimlenerek, MÖ 8. binyıl Orta Anadolu bölgesi için tipik bir yerleşme dokusu oluşturmuştur. Aynı özelliklere sahip dokunun, bölgede Aşıklı Höyük’ün kronolojik takipçisi bazı yerleşmelerde de devam ettiği bilinmektedir.
Orta Anadolu Yerleşme Modeli
adı altında ele alınan bu ortak mimari özelliklerin en eski örneğini oluşturan Aşıklı Höyük’te, 2020 yılında uygulanmaya başlanan proje ile bu yerleşme dokusunun korunması ve sergilenmesi amaçlanmaktadır. Saha Gelişim Planı kapsamında yürütülen çalışmalarda 10 x 20 metrelik bir alan, rekonstrüktif koruma yöntemi ile bir yandan korumaya alınmış diğer yandan kazılarla ortaya çıkarıldığı şekliyle sergilenmek üzere canlandırılmıştır.
İnsan yaşamında bilişsel ve teknolojik gelişimin en önemli aşaması, çocukluk dönemidir. Buna karşın tarih öncesi toplulukların dünyasında çocuklar, genelde ihmal edilen bir alan olmuştur. Bu konuda ...araştırma azlığının nedeni, çalışmaların genellikle tarih öncesi toplulukların sosyo-ekonomik dünyalarını meydana getiren temel aktiviteler olan tarım, hayvancılık, avcılık-toplayıcılık ve çeşitli zanaatlar gibi çoğunlukla fiziksel güç ve bilişsel beceri gerektiren konulara odaklanmış olmasıdır. Bu nedenle, çoğu zaman arkeologlar için, örneğin Neolitik bir köy, besin üretimi ile meşgul olan yetişkin bireylerle özdeştir. Çocuklar ise üretim faaliyetlerinin aktif bir parçası olmaya başladıkları belirli bir yaşa gelene dek toplumun en pasif halkası olarak görülürler. Ancak, etnografik ve arkeolojik çalışmalar, yetişkin bireylerin gündelik sorumluluklara ve zanaatlara ilişkin bilgi ve becerilerinin gelişimi, bireyin seçeceği uzmanlık, topluluk içindeki kimlik ve rollerinin çocukluk döneminde oluşmaya başladığını göstermektedir. Bu nedenle tarih öncesi bir topluluğu anlamak için çocukların dünyasını anlamak en az yetişkin bireyler kadar önemlidir. Bu makale, bundan 10 bin yıl öncelerinde Aşıklı Höyük’te doğan ve ölen çocuklar üzerinedir. Bebek ve çocuklara dair iskelet verilerinin yanı sıra yontma taş (obsidiyen) işçiliği üzerine yürütülen teknolojik analizler sonucunda, çocukların da üretim süreci içerisinde yer aldıkları saptanmış ve böylelikle çocuklar, arkeolojik veriler vasıtasıyla görünür kılınmıştır. Çalışmada, son veriler ışığında, Aşıklı topluluğunun bin yıllık uzun ve kesintisiz iskân tarihinde bebeklerin ve çocukların yeri ve biyolojik ve sosyal kimlikleri ele alınmaktadır.
A scientific woman who left her imprint on archaeology Nur Balkan Atlı in 2000 durant the excavations of Kaletepe Photo Kaletepe excavations archives Prof. Nur Balkan-Atlı passed away on the 10th of ...April 2019. She was one of the most persistent professors of prehistoric archaeology whose scientific concerns and human qualities build up Istanbul University Prehistory Department’s intern-ational network and fame. She was an exemplary scientist, dedicated to her students, driven by a keen sci...
This article focuses on the Initial Neolithic (ca 6850–6500 cal. BC) lithic assemblages of Ulucak and Uğurlu in the Aegean region of Turkey. Ulucak and Uğurlu are among the earliest Aegean Neolithic ...sites, and their lithic industries were managed with specific traditions and skills, quite different from what we know of the industry for other regions such as central Anatolia, Cyprus and the Levant, and even some other areas of the Aegean. This article presents the results of the study of the chipped-stone assemblages of Ulucak and Uğurlu, and aims to demonstrate how they contribute to wider theories about the Neolithisation of the Aegean.
Kayacan Nurcan. Chipped stone industry of the neolithic site of Musular (Cappadocia) : Preliminary results. In: Anatolia Antiqua, Tome 11, 2003. pp. 1-10.
Les faucilles apparaissent au Proche-Orient dès le Natoufien et deviennent de plus en plus fréquentes au Néolithique. On les retrouve sur les sites sous forme de « lame-faucille » ou d'« éléments de ...faucille » armant les manches pour former des outils composites. Plus exceptionnellement, des faucilles composites plus ou moins fragmentaires sont préservées. Certains auteurs considèrent que l'évolution morphologique de ces instruments composites traduit une recherche d'efficacité qui ne cesse de s'intensifier depuis l'adoption de l'agriculture jusqu'à sa généralisation. En reprenant la littérature, nous avons identifié trois étapes majeures dans l'évolution de la fabrication des faucilles au Proche-Orient avec l'apparition successive des instruments composites, des manches courbes, puis de la faucille courbe à insertion en épi. Les expérimentations manuelles de moisson de céréales ont été mises en place pour évaluer l'influence des paramètres suivants : la courbure plus ou moins marquée du manche, la longueur de tranchant, la position des inserts (emmanchement parallèle ou oblique), et, enfin, la matière première de l'outil (silex ou obsidienne) et le facteur humain. Le traitement statistique des résultats nous permet d'évaluer l'influence de chacum de ces paramètres ainsi que des associations de paramètres. Le facteur humain reste un paramètre essentiel. Nous avons ensuite pu montrer que le silex avait des qualités de coupe plus importantes que l'obsidienne pour ce type d'activité et l'analyse microscopique des usures nous a permis de déterminer quels étaient les comportements différenciés de ces deux matériaux. Il apparaît ensuite que l'interaction entre la courbure du manche et le mode d'insertion des éléments influencent le rendement de coupe : l'association entre un manche courbe et des insertions en épi est plus favorable. La courbure du manche et la longueur de tranchant ont enfin une influence sur le nombre de coups de faucille nécessaire pour moissonner un champ d'une superficie donnée. Si nous considérons la région pour laquelle nous avons le plus de données, la Syrie du Nord, les résultats montrent que la rareté des éléments de faucille en obsidienne pourrait être au moins en partie liée aux caractéristiques propres du matériau. Il est pourtant des sites à immédiate proximité des zones d'approvisionnement en obsidienne où les éléments de faucille en obsidienne sont pléthores (exemple cappadocien d'Aşıklı Höyük). Pour la Syrie du Nord, encore, on observe au moment de la généralisation de l'agriculture une préférence plus que marquée pour les faucilles à manche courbe et inserts obliques. Pourtant, la recherche d'efficacité ne semble pas le facteur déterminant pour expliquer cette préférence. Les questions de spécialisation technique des activités de taille et d'organisation sociale des activités agricoles sont primordiales. In the Near East "sickles" or "glossy pieces" occur for the first time during the Natufian period. These tools are either "sickle blades" or "sickle elements". "Sickle blades" are used hafted or hand-held as single cutting tools. "Sickle elements" are inserted in a haft in order to create a composite instrument. When sickles are made from flint, they are easily recognized since they usually bear a macroscopic gloss that covers a wide area on both sides of the tool. Experimental and microscopic studies have shown that the majority of these tools were used as sickles to harvest cereals or, less frequently, soft siliceous plants such as reeds and typha. Macroscopic glosses of different natures develop on various occasions, for example: on elements mounted on threshing sledges; when limestone is worked with the addition of water; when humid clay is scraped; etc. When sickle elements are made from obsidian, no macroscopic gloss develops and use wear is rarely observed with the naked eye. In this case, the worn area on the tool presents a mat aspect and abrasion features. Such tools are rarely recognized as such. Sometimes, abrasion features are erroneously interpreted as harvesting marks. The frequency of harvesting instruments increased during the Neolithic period. According to several analysts, the use of sickles to harvest cereals was preferred to other harvesting techniques such as uprooting, the use of beaters and baskets, and mesoarias in order to maximize yields. Moreover, the evolution of the morphology of sickles has often been related to the gradual adoption and the spread of agriculture. Sickles found on archaeological sites may be complete or broken. The hafts were made from wood, antler, or horn and the sickle elements were inserted parallel or oblique to the haft and often glued with bitumen. If only sickle elements are discovered on the site, the distribution of the gloss and the bitumen and the size of the blanks provide information on the mode of hafting, the degree of curvature of the haft, and, in some cases, the number of lithic inserts. The aim of the present paper is to examine the relation between the morphology and efficiency of the sickles and the adoption of agriculture by the Neolithic communities in the Near East. Based on publications, we identify three major steps in the evolution of sickle manufacturing in this region: the appearance of composite sickles, increased curvature of the hafts, and the adoption of oblique inserts. An experimental programme was devised in order to evaluate the impact of the following factors on sickle productivity: the harvester; the curvature of the haft; the length of the cutting edge of the lithic blade; the position of the blade in relation to the haft (parallel or oblique); the raw material used (flint or obsidian). Statistical analysis of the results allows the impact of each factor and of combinations of factors to be evaluated. Our research has shown that the harvester parameter is important. The knowledge, skill, and physical strength of the harvester as well as his/her adaptation to the use of different tools and to different working conditions influence productivity. These factors affect the movement executed by the harvester, the distribution of use wear on the tool, and the degree of damage on the cutting edge. Our results also stress the impact of the lithic tool's raw material on sickle efficiency. As a result of its mechanical properties, flint is better adapted to harvesting than obsidian. In particular, flint is less brittle and less prone to abrasion than obsidian. We examine the distinct behaviour of the two raw materials, when they are subject of similar constraints, through macroscopic and microscopic analysis of the damage on the experimental tools. Considering the interaction between the morphology of the haft and the position of the inserts, our data confirm that the use of a curved haft with obliquely set inserts increases the cutting capacity of the sickle. The curvature of the haft and the length of the cutting edge determine the number of strokes needed to harvest a given field area. When archaeological data are examined, published information on sickle morphology concerns mainly the Natufian in the southern Levant and the PPNA and PPNB in northern Syria. The scarcity of obsidian sickle elements can be related to the difficulty of identifying characteristic use wear but also to the choice of flint for its mechanical properties and the uneven geographical distribution of obsidian. Large quantities of obsidian sickle blades are found in archaeological sites located near obsidian sources, for example, Aşıklı Höyük in Cappadocia, Turkey. Three stages are identified in the evolution of Near Eastern sickles between 12000 and 7000 B.C. During the Natufian period, the adoption of composite instruments had an influence on the efficiency of the sickles. During the PPNB, the gradual increase of haft curvature probably played a role in the harvester's tempo and movements. In the latest phase of the PPNB, the practice of agriculture was widespread and composite sickles with a curved haft and oblique inserts are common. We argue that this choice can be partly explained by the need for sickle efficiency. Changes in the system of lithic production and the organization of agricultural activities during the same period also influence the adoption of oblique inserts. Moreover, comparisons between the evolution of sickles in different geographical areas, northern Syria and Cyprus, indicate that technical traditions, technical transfer and societal context were more critical in the choice of sickle morphology.
Erdoğu Burçin, Kayacan Nurcan. Drive into the White Lake : 2003 field survey in the Tuz Gölü region of Central Anatolia. In: Anatolia Antiqua, Tome 12, 2004. pp. 217-226.