The aim of this study was to assess the effect of a unilateral anterior cruciate ligament reconstruction (ACLR) on maximum voluntary contraction (MVC) and explosive strength of both the involved limb ...and the uninvolved limb. Nineteen male athletes completed a standard isometric testing protocol 4 months post-ACLR, while 16 healthy participants served as a control group (CG). The explosive strength of the knee extensors and flexors was assessed as RFD obtained from the slope of the force-time curves over various time intervals. Both muscle groups of the involved limb had significantly lower MVC compared to the uninvolved. The involved limb also had significantly lower RFD in the late phase of contraction (140-250 ms) for both knee extensors and flexors (P < 0.05). There was no difference in MVC between the uninvolved limb and the CG. However, RFD of the uninvolved limb was lower compared to CG for both knee extensors (0-180 ms; P < 0.01) and flexors (0-150 ms; P < 0.05). ACLR leads to lower MVC and explosive strength of the involved limb. As a consequence of potential crossover (presumably neural-mediated) effects, explosive strength deficits could be bilateral, particularly in the early phase of the contraction (<100 ms).
Rapid force generation across submaximal levels has been evaluated with the rate of force development scaling factor (RFD-SF) in different isometric tasks, while such measurement was still not ...verified in dynamic tasks. Our study was designed to evaluate the feasibility of the RFD-SF in dynamic drop jump (DJ) task (RFD-SFDJ). A total of 55 young athletes performed isometric plantarflexion at different submaximal intensities and 60 DJs (6 different drop heights). For each participant we calculated linearity (r2) and slope in isometric task (RFD-SFPF), eccentric part of DJ (RFD-SFDJ-ECC) and concentric part of DJ (RFD-SFDJ-CON), as well as average jump height (DJH) from each drop height. Our results revealed strong linear force-RFD relationship for isometric plantarflexion (r2 = 0.90 ± 0.06), eccentric (r2 = 0.87 ± 0.09) and concentric phase of DJ (r2 = 0.80 ± 0.18). Significant moderate positive correlations were calculated between RFD-SFPF and RFD-SFDJ-ECC (r = 0.311, p < 0.05) and small negative correlations between RFD-SFDJ-CON and RFD-SF (r = -0.276, p < 0.05). Significant positive moderate correlations were seen only between RFD-SFDJ-ECC and DJH from 10 cm (r = 0.459, p < 0.001) and 15 cm (r = 0.423, p < 0.01). This is the first study to introduce and confirm that RFD-SFDJ can be obtained from the multi-joint tasks (60 jumps) and still provide acceptable reliability and linear relationship. Furthermore, RFD-SFDJ may have greater practical application than RFD-SF assessed under the isometric conditions. This verification of RFD-SFDJ opens opportunities for further research regarding its practical application.
Single outcomes of standard isokinetic dynamometry tests do not discern between various muscle mechanical capacities. In this study, we aimed to (1) evaluate the shape and strength of the ...force-velocity relationship of knee extensors, as observed in isokinetic tests conducted at a wide range of angular velocities, and (2) explore the concurrent validity of a simple 2-velocity method. Thirteen physically active females were tested for both the peak and averaged knee extensor concentric force exerted at the angular velocities of 30°-240°/s recorded in the 90°-170° range of knee extension. The results revealed strong (0.960<R<0.998) linear force-velocity relationships that depict the maximum muscle force (i.e. the force-intercept), velocity (velocity-intercept), and power (their product). Moreover, the line drawn through only the 60° and 180°/s data (the '2-velocity method') revealed a high level of agreement with the force-velocity relationship obtained (0.76<R<0.97; all power<0.001); while the force-intercept highly correlated (0.68<R<0.84; all power≤0.01) with the directly measured isometric force. The 2-velocity method could therefore be developed into a standard method for isokinetic testing of mechanical capacities of knee extensors and, if supported by further research, other muscles. This brief and fatigue-free testing procedure could discern between muscle force, velocity, and power-producing capacities.
This study aimed to (1) evaluate the shape of the force-velocity (F-V) relationship obtained from different muscles, (2) explore the concurrent validity of the two-point method with respect to the ...multiple-point method, (3) evaluate whether the F-V relationship can discriminate between muscle groups and genders, and (4) explore the generalisability of the same F-V relationship parameters (maximal force F
0
, maximal velocity V
0
), and maximal power P
0
) between different tasks. The F-V relationship of 22 physically active participants (12 women) were tested during knee extension, knee flexion, elbow extension and elbow flexion through the multiple- (eight velocities: 30-60-90-120-150-180-210-240º/s) and two-point (two velocities: 60-180º/s) methods. The findings revealed (1) highly linear F-V relationships (r ≥ 0.893), (2) high concurrent validity of the two-point method for F
0
, but lower for V
0
and P
0
, (3) the outcomes of both methods were sensitive to the muscle groups (higher for knee muscles) and gender (higher for men), and (4) the magnitude of the same F-V parameters were poorly correlated between different tasks (median r < 0.1). These results support the two-point method as a valid and sensitive procedure for determining the maximal capacities of the muscles to produce F, but not V, during isokinetic tests.
The purpose of the present study was (i) to explore the reliability of the most commonly used countermovement jump (CMJ) metrics, and (ii) to reduce a large pool of metrics with acceptable levels of ...reliability via principal component analysis to the significant factors capable of providing distinctive aspects of CMJ performance. Seventy-nine physically active participants (thirty-seven females and forty-two males) performed three maximal CMJs while standing on a force platform. Each participant visited the laboratory on two occasions, separated by 24-48 h. The most reliable variables were performance variables (CV = 4.2-11.1%), followed by kinetic variables (CV = 1.6-93.4%), and finally kinematic variables (CV = 1.9-37.4%). From the 45 CMJ computed metrics, only 24 demonstrated acceptable levels of reliability (CV ≤ 10%). These variables were included in the principal component analysis and loaded a total of four factors, explaining 91% of the CMJ variance: performance component (variables responsible for overall jump performance), eccentric component (variables related to the breaking phase), concentric component (variables related to the upward phase), and jump strategy component (variables influencing the jumping style). Overall, the findings revealed important implications for sports scientists and practitioners regarding the CMJ-derived metrics that should be considered to gain a comprehensive insight into the biomechanical parameters related to CMJ performance.
The aim of the study was to compare the effects of high-intensity interval training (HIIT) and nutrition advice on cardiometabolic biomarkers, hormonal parameters, and cardiorespiratory fitness in ...adolescent girls with obesity. Adolescent girls with obesity (n = 44, aged 13–19 years) were randomized into a 12-week intervention as follows: (i) dietary advice and HIIT (n = 22), and (ii) dietary advice only (n = 22). The concentration of biomarkers of inflammation, biochemical and hormonal testing, oral glucose tolerance test, cardiorespiratory fitness, physical activity levels, and nutrition were assessed. After a 3-month intervention, the diet+HIIT group significantly increased insulin sensitivity index (–0.34 ± 1.52 vs. 1.05 ± 3.21; p = 0.001) and work load (0.6 ± 11.3 W vs. 14.6 ± 20.2 W; p = 0.024) and decreased glucose area under the curve (–0.29 ± 4.69 vs. −0.98 ± 4.06; p = 0.040), insulin area under the curve (−9.65 ± 117.9 vs. −98.7 ± 201.8; p = 0.003), and high-sensitivity C-reactive protein (hs-CRP) (0.12 ± 1.92 mg/L vs. −1.47 ± 3.67 mg/L; p = 0.039) in comparison with the diet group. Regarding within-group changes, both groups had significant improvements in body mass index (BMI), BMI-standard deviation score, body fat percentage, and systolic blood pressure. Positive impact on waist circumference, waist circumference/height ratio, diastolic blood pressure, hs-CRP, work load, maximal heart rate, and resting heart rate was observed only after the diet+HIIT intervention. No significant change was noted in peak oxygen uptake, lipid profile, and hormonal parameters between groups after intervention.
Novelty
HIIT and nutrition advice increased insulin sensitivity and decreased BMI, body fat, systolic blood pressure, and diastolic blood pressure.
Nutrition advice decreased BMI, body fat, and systolic blood pressure in adolescent girls with obesity.
Abstract
Cabarkapa, D, Cabarkapa, DV, Philipp, NM, Knezevic, OM, Mirkov, DM, and Fry, AC. Pre-post practice changes in countermovement vertical jump force-time metrics in professional male basketball ...players.
J Strength Cond Res
37(11): e609–e612, 2023—Despite the countermovement vertical jump (CVJ) being one of the most popular noninvasive and time-efficient methods for monitoring neuromuscular status, there is a lack of scientific literature focused on examining fatigue-induced alterations in performance in elite athletes. Thus, the purpose of this study was to examine changes in force-time metrics pre-post practice in professional male basketball players. Seventeen athletes competing in first-tier and second-tier national basketball leagues in Europe participated in this study. While standing on a uniaxial force plate sampling at 1,000 Hz, each athlete completed 3 CVJs pre-practice and post-practice. The practice consisted of individual and team shooting drills, position-specific player development drills, 5-on-0 offensive actions, and 5-on-5 play, including full-court transition (∼2 hours). The findings reveal that pre-post practice changes in force-time metrics seem to be phase specific. Despite a trivial increase in eccentric mean force (920.4 ± 100.2, 929.4 ± 100.0 N), most changes were observed within the concentric phase of the CVJ. The concentric phase duration increased pre-post practice (0.233 ± 0.027, 0.242 ± 0.033 seconds), whereas concentric impulse (262.9 ± 18.8, 258.6 ± 21.6 N·s), peak velocity (2.93 ± 0.22, 2.86 ± 0.22 m·s
−1
), mean force (2052.4 ± 179.2, 2002.7 ± 188.2 N), mean power (3,165.5 ± 269.5, 3,030.9 ± 326.8 W), and peak power (5,523.4 ± 607.3, 5,246.6 ± 663.7 W) experienced a significant decrease. Moreover, alongside longer contraction time (0.663 ± 0.065, 0.686 ± 0.074 seconds), lower vertical jump height (41.0 ± 6.8, 38.9 ± 6.6 cm) and reactive strength index-modified (0.634 ± 0.113, 0.579 ± 0.111 m·s
−1
) values were observed post-practice. Overall, these findings may allow practitioners to detect fatigue-induced changes in CVJ force-time metrics in professional male basketball players that can ultimately improve the acute and longitudinal training-adaptation monitoring process.
The aim of this study was to investigate the resistance-specific gains in muscle power and strength (1RM) following the training of maximum bench-press throws (BPT) against constant, inertial, and ...combined resistance. Forty-eight male participants (age 20.5 ± 2.0 years) were randomly assigned to the constant, inertial, combined resistance, or control group. Participants underwent 8 weeks of training of BPT against the loads that corresponded to the different effects of mass of 40 kg (∼50% of 1RM). The gains in average and maximum power, and 1RM were significant in all experimental groups (
< 0.01), but not in the control group (
> 0.1). Relative gains in the average (26.3 ± 9.8%) and maximum power (25.2 ± 9.8%) were larger than that in the 1RM (mean 7.2 ± 6.9%; both
< 0.001). The gains in the average (
= 6.0;
< 0.01) and maximum power (
= 4.7;
< 0.01) were higher when tested against the training-specific resistance than when tested against the remaining two resistance types. Differences in 1RM among experimental groups were not significant (
= 0.092). The most important and rather novel finding of the study is that the training against the weight and inertial resistance, and their combination results in resistance-specific gains in muscle power, although the overall gains muscle strength and power remain comparable across the training protocols.
Purpose
To investigate the selective effects of different types of external loads applied in vertical jump training on both the performance and muscle power output of the squat (SJ) and ...countermovement jump (CMJ).
Methods
Physically active males practiced maximum unconstrained vertical jumps over an 8-week period with no load, with either a negative or positive load exerted by a nearly constant external force that altered their body weight, and with a loaded vest that increased both the body weight and inertia. The magnitude of all applied loads corresponded to 30 % of body weight.
Results
A similar training-associated increase in jump height was observed in all experimental groups in both CMJ (7.4–11.8 %) and SJ (6.4–14.1 %). The relative increase in power output was comparable to the increase in jump height in SJ (7.4–11.5 %), while the power increase in CMJ was relatively small and load-specific (0.5–9.5 %). The observed differences could originate from the changes in the CMJ pattern, reflected through the depth of the counter movement that particularly increased after the training with negative load (42 %) and no load (21 %). The same participants also revealed increased CMJ duration, reduced ground reaction forces, as well as reduced maximum and average power output when compared with other training groups.
Conclusion
Jump training with the applied loads could lead to a comparable improvement in jumping performance. However, the observed load-specific adaptations of CMJ pattern could decouple the training-associated increase in jump height from the increase in muscle power output.
This study aimed to assess the within- and between-session reliability of the KiSprint system for determining force-velocity-power (FVP) profiling during sprint running. Thirty (23 males, 7 females; ...18.7 + or - 2.6 years;) young high-level sprinters performed maximal effort sprints in two sessions separated by one week. Split times (5, 10, 20 and 30 m), which were recorded with a laser distance meter (a component of the KiSprint system), were used to determine the horizontal FVP profile using the Samozino's field-based method. This method assesses the FVP relationships through estimates of the step-averaged ground reaction forces in sagittal plane during sprint acceleration using only anthropometric and spatiotemporal (split times) data. We also calculated the maximal theoretical power, force and velocity capabilities and the slope of the FV relationship, the maximal ratio of horizontal-toresultant force (RF), and the decrease in the RF (DRF). Overall, the results showed moderate or good to excellent within- and between-session reliability for all variables (ICC > 0.75; CV < 10 %), with the exception of FV slope and DRF that showed low relative reliability (ICC = 0.47-0.48 within session, 0.31-0.33 between-session) and unacceptable between-session absolute reliability values (CV = 10.9-11.1 %). Future studies are needed to optimize the protocol in order to maximize the reliability of the FVP variables, especially when practitioners are interested in the FV slope and DRF. In summary, our results question the utility of the sprint-based FVP profiling for individualized training prescription, since the reliability of the FV slope and D RF variables is highly questionable. Key words: Acceleration, horizontal force, force-velocity relationship, sprinters.
PDF
