The coronavirus disease (COVID-19) pandemic is an important health crisis worldwide. Several strategies were implemented to combat COVID-19, including wearing masks, hand hygiene, and social ...distancing. The impact of these strategies on COVID-19 and other viral infections remains largely unclear.
We aim to investigate the impact of implemented infectious control strategies on the incidences of influenza, enterovirus infection, and all-cause pneumonia during the COVID-19 pandemic.
We utilized the electronic database of the Taiwan National Infectious Disease Statistics System and extracted incidences of COVID-19, influenza virus, enterovirus, and all-cause pneumonia. We compared the incidences of these diseases from week 45 of 2016 to week 21 of 2020 and performed linear regression analyses.
The first case of COVID-19 in Taiwan was reported in late January 2020 (week 4). Infectious control strategies have been promoted since late January. The influenza virus usually peaks in winter and decreases around week 14. However, a significant decrease in influenza was observed after week 6 of 2020. Regression analyses produced the following results: 2017, R
=0.037; 2018, R
=0.021; 2019, R
=0.046; and 2020, R
=0.599. A dramatic decrease in all-cause pneumonia was also reported (R
values for 2017-2020 were 0.435, 0.098, 0.352, and 0.82, respectively). Enterovirus had increased by week 18 in 2017-2019, but this was not observed in 2020.
Using this national epidemiological database, we found a significant decrease in cases of influenza, enterovirus, and all-cause pneumonia during the COVID-19 pandemic. Wearing masks, hand hygiene, and social distancing may contribute not only to the prevention of COVID-19 but also to the decline of other respiratory infectious diseases. Further studies are warranted to elucidate the causal relationship.
Graphene oxide-based materials (GOBMs) have been widely explored as nano-reinforcements in cementitious composites due to their unique properties. Oxygen-containing functional groups in GOBMs are ...crucial for enhancing the microstructure of cementitious composites. A better comprehension of their surface chemistry and mechanisms is required to advance the potential applications in cementitious composites of functionalized GOBMs. However, the mechanism by which the oxygen-containing functional groups enhance the response of cementitious composites is still unclear, and controlling the surface chemistry of GOBMs is currently constrained. This review aims to investigate the reactions and mechanisms for functionalized GOBMs as additives incorporated in cement composites. A variety of GOBMs, including graphene oxide (GO), hydroxylated graphene (HO-G), edge-carboxylated graphene (ECG), edge-oxidized graphene oxide (EOGO), reduced graphene oxide (rGO), and GO/silane composite, are discussed with regard to their oxygen functional groups and interactions with the cement microstructure. This review provides insight into the potential benefits of using GOBMs as nano-reinforcements in cementitious composites. A better understanding of the surface chemistry and mechanisms of GOBMs will enable the development of more effective functionalization strategies and open up new possibilities for the design of high-performance cementitious composites.
Vacuum‐sublimed inorganic cesium lead halide perovskite thin films are prepared and integrated in all‐vacuum‐deposited solar cells. Special care is taken to determine the stoichiometric balance of ...the sublimation precursors, which has great influence on the device performance. The mixed halide devices exhibit exceptional stabilized power conversion efficiency (11.8%) and promising thermal and long‐term stabilities.
The international and national HIV treatment guidelines in 2016 have focused on scaling up access to combination antiretroviral therapy (cART). We aimed to assess the trends and treatment outcomes of ...late cART initiation in Taiwan.
Between June 2012 and May 2016, we retrospectively included antiretroviral-naive HIV-positive adults who initiated cART. Late initiation was defined as when cART was initiated in patients with a CD4 count <200 cells/mm3 or having experienced AIDS-defining illnesses. The treatment outcomes were assessed up to 6 months after starting cART.
We included 3655 HIV-positive patients, and the majority of the patients were male (95.4%) with a median age of 31 years and initiated non-nucleoside reverse-transcriptase inhibitor-containing regimens (87.0%). The median CD4 count at cART initiation increased from 207 cells/mm3 in 2012 to 298 cells/mm3 in 2016, and the overall proportion of late cART initiation decreased from 49.1% in 2012 to 29.0% in 2016 (P for trend <0.001). Late cART initiation mainly resulted from late presentation for HIV care and was associated with older age (per 1-year increase, adjusted odds ratio AOR, 1.05; 95% CI, 1.04-1.06), HBsAg seropositivity (AOR, 1.31; 95% CI, 1.04-1.64), HIV care in central and southern Taiwan, initiating cART in earlier year, non-intravenous drug users (AOR, 1.96; 95% CI, 1.33-2.86), and negative hepatitis C serostatus (AOR, 1.47; 95% CI, 1.04-2.08). Compared with non-late initiators, late initiators had a higher rate of all-cause mortality (1.7% vs. 0.3%) and regimen modification due to virological failure (7.1% vs. 2.6%). The predicting factors of all-cause mortality were late cART initiation (adjusted hazard ratio AHR, 5.40; 95% CI, 2.14-13.65) and older age (AHR, 1.06; 95% CI, 1.03-1.10).
While the proportion of late cART initiation decreased over time in Taiwan, late initiation remained in a substantial proportion of HIV-positive patients. The late initiators had higher risk for poor outcomes. The need for strategies to earlier detection of HIV infection and expediting cART initiation should be highlighted, especially among the older population.
Organic–inorganic mixed halide perovskites have emerged as an excellent class of materials with a unique combination of optoelectronic properties, suitable for a plethora of applications ranging from ...solar cells to light‐emitting diodes and photoelectrochemical devices. Recent works have showcased hybrid perovskites for electronic applications through improvements in materials design, processing, and device stability. Herein, a comprehensive up‐to‐date review is presented on hybrid perovskite electronics with a focus on transistors and memories. These applications are supported by the fundamental material properties of hybrid perovskite semiconductors such as tunable bandgap, ambipolar charge transport, reasonable mobility, defect characteristics, and solution processability, which are highlighted first. Then, recent progresses on perovskite‐based transistors are reviewed, covering aspects of fabrication process, patterning techniques, contact engineering, 2D versus 3D material selection, and device performance. Furthermore, applications of perovskites in nonvolatile memories and artificial synaptic devices are presented. The ambient instability of hybrid perovskites and the strategies to tackle this bottleneck are also discussed. Finally, an outlook and opportunities to develop perovskite‐based electronics as a competitive and feasible technology are highlighted.
Organic–inorganic halide perovskites show high promise for electronic devices owing to exceptional electrical, optical, and structural properties. The latest breakthroughs in structural, interface, defect engineering, and pattering techniques as applied to halide perovskite transistors, memories and to improve stability issues in perovskites are reviewed. Lastly, the existing challenges and outline for future research directions are provided.
Hyperuricemia (HC) is one of the important risk factors for gout, arteriosclerosis, and cardiovascular disease. Animal studies have shown that
can improve microbiota and immune regulation, as well as ...inhibit uric acid production. However, it is not clear whether
can improve HC and intestinal microbiota. We used potassium oxonate (PO) to induce HC in male SD rats and then treated them with
TCI227 in a dose-dependent manner (HC + LD, HC + MD, HC + HD) for 4 weeks. We examined organ weight, conducted biochemical examinations of blood and urine, and analyzed the intestinal microbiota in feces through a 16s rDNA sequence analysis. In this study, TCI227 improved body weight, decreased creatinine and serum uric acid, and increased urine uric acid compared to the HC group. Furthermore, TCI227 increased short-chain fatty acids (SCFAs). In the fecal microbiota (family), TCI227 increased the level of
and then decreased the levels of
and
compared to the HC group. Finally, in the fecal microbiota (genus), TCI227 decreased the level of
and then increased the levels of
and
compared to the HC group. This study suggested that TCI227 can improve HC and can change the composition of intestinal microbiota in PO-induced male HC SD rats.
Contact engineering is a prerequisite for achieving desirable functionality and performance of semiconductor electronics, which is particularly critical for organic–inorganic hybrid halide ...perovskites due to their ionic nature and highly reactive interfaces. Although the interfaces between perovskites and charge‐transporting layers have attracted lots of attention due to the photovoltaic and light‐emitting diode applications, achieving reliable perovskite/electrode contacts for electronic devices, such as transistors and memories, remains as a bottleneck. Herein, a critical review on the elusive nature of perovskite/electrode interfaces with a focus on the interfacial electrochemistry effects is presented. The basic guidelines of electrode selection are given for establishing non‐polarized interfaces and optimal energy level alignment for perovskite materials. Furthermore, state‐of‐the‐art strategies on interface‐related electrode engineering are reviewed and discussed, which aim at achieving ohmic transport and eliminating hysteresis in perovskite devices. The role and multiple functionalities of self‐assembled monolayers that offer a unique approach toward improving perovskite/electrode contacts are also discussed. The insights on electrode engineering pave the way to advancing stable and reliable perovskite devices in diverse electronic applications.
Rational selection of electrodes plays a critical role in perovskite‐based electronics due to the high reactivity of halide perovskite materials. A comprehensive review of perovskite/electrode interfaces, as well as, state‐of‐the‐art contact engineering, which assists the development of perovskite‐based devices with inhibited interfacial reactions, ohmic carrier transport, and non‐hysteric electronic characteristics, is presented.
The use of photovoltaic cells with an organometallic perovskite as the active layer for indoor dim‐light energy harvesting is evaluated. By designing the electron‐transporting materials and ...fabrication processes, the traps in the perovskite active layers and carrier dynamics can be controlled, and efficient devices are demonstrated. The best‐performing small‐area perovskite photovoltaics exhibit a promising high power conversion efficiency up to ≈27.4%, no hysteresis behavior, and an exceptionally low maximum power point voltage variation of ≈0.1 V under fluorescent lamp illumination at 100–1000 lux. The 5.44 cm2 large‐area device also shows a high efficiency of 20.4% and a promising long‐term stability. Compared with the most efficient inorganic and organic solar cells nowadays, the competitive efficiency, low fabrication cost, and low raw material costs make perovskite photovoltaics ideal for indoor light harvesting and as Internet of Things power provider.
Device engineering of perovskite photovoltaics dedicated to indoor dim‐light applications is reported. The trap density in the perovskite layer is effectively eliminated by judiciously controlling the fabrication of the electron‐transporting layers. Small‐area lab cell and 5.44 cm2 large‐area device attain maximum efficiencies up to 27.4% and 20.4% under indoor illumination, respectively.
The prognostic significance of the relapse interval in patients with resected oral cavity squamous cell carcinoma (OCSCC) is a matter of ongoing debate. In this large-scale, registry-based, ...nationwide study, we examined whether the time interval between surgery and the first disease relapse may affect survival outcomes in Taiwanese patients with OCSCC.
Data made available by the Taiwan Health Promotion Administration as of 2004 were obtained. The study cohort consisted of patients who were included in the registry between 2011 and 2017. Disease staging was performed according to the American Joint Committee on Cancer (AJCC) Staging Manual, Eight Edition. We retrospectively reviewed the clinical records of 13,789 patients with OCSCC who received surgical treatment. A total of 2327 (16.9%) patients experienced a first disease relapse. The optimal cutoff value for the relapse interval was 330 days when both 5-year disease-specific survival (DSS) and overall survival (OS) (≤ 330/>330 days, n = 1630/697) were taken into account. In addition, we undertook a propensity score (PS)-matched analysis of patients (n = 654 each) with early (≤ 330 days) versus late (> 330 days) relapse.
The median follow-up time in the entire study cohort was 702 days (433 and 2001 days in the early and late relapse groups, respectively). Compared with patients who experienced late relapse, those with early relapse showed a higher prevalence of the following adverse prognostic factors: pT4, pN3, pStage IV, poor differentiation, depth of invasion ≥ 10 mm, and extra-nodal extension. Multivariable analysis revealed that early relapse was an independent adverse prognostic factor for both 5-year DSS and OS (average hazard ratios AHRs: 3.24 and 3.91, respectively). In the PS-matched cohort, patients who experienced early relapse showed less favorable 5-year DSS: 58% versus 30%, p < 0.0001 (AHR: 3.10 2.69 - 3.57) and OS: 49% versus 22%, p < 0.0001 (AHR: 3.32 2.89 - 3.81).
After adjustment for potential confounders and PS matching, early relapse was an adverse prognostic factor for survival outcomes in patients with OCSCC. Our findings may have significant implications for risk stratification.
PDF
