Silicon has been intensively studied as an anode material for lithium‐ion batteries (LIB) because of its exceptionally high specific capacity. However, silicon‐based anode materials usually suffer ...from large volume change during the charge and discharge process, leading to subsequent pulverization of silicon, loss of electric contact, and continuous side reactions. These transformations cause poor cycle life and hinder the wide commercialization of silicon for LIBs. The lithiation and delithiation behaviors, and the interphase reaction mechanisms, are progressively studied and understood. Various nanostructured silicon anodes are reported to exhibit both superior specific capacity and cycle life compared to commercial carbon‐based anodes. However, some practical issues with nanostructured silicon cannot be ignored, and must be addressed if it is to be widely used in commercial LIBs. This Review outlines major impactful work on silicon‐based anodes, and the most recent research directions in this field, specifically, the engineering of silicon architectures, the construction of silicon‐based composites, and other performance‐enhancement studies including electrolytes and binders. The burgeoning research efforts in the development of practical silicon electrodes, and full‐cell silicon‐based LIBs are specially stressed, which are key to the successful commercialization of silicon anodes, and large‐scale deployment of next‐generation high energy density LIBs.
Research on various silicon anode materials for lithium‐ion batteries has thrived over the past decade. Meanwhile, electrolyte and binder research, and engineering on the electrode scale bear the same importance to boost battery performance. A proper combination of the strategies reviewed here can be the key to bringing silicon anodes closer to wide practical applications.
Core–shell composites, Fe3O4@C, with 500 nm Fe3O4 microspheres as cores have been successfully prepared through in situ polymerization of phenolic resin on the Fe3O4 surface and subsequent ...high-temperature carbonization. The thickness of carbon shell, from 20 to 70 nm, can be well controlled by modulating the weight ratio of resorcinol and Fe3O4 microspheres. Carbothermic reduction has not been triggered at present conditions, thus the crystalline phase and magnetic property of Fe3O4 micropsheres can be well preserved during the carbonization process. Although carbon shells display amorphous nature, Raman spectra reveal that the presence of Fe3O4 micropsheres can promote their graphitization degree to a certain extent. Coating Fe3O4 microspheres with carbon shells will not only increase the complex permittivity but also improve characteristic impedance, leading to multiple relaxation processes in these composites, thus the microwave absorption properties of these composites are greatly enhanced. Very interestingly, a critical thickness of carbon shells leads to an unusual dielectric behavior of the core–shell structure, which endows these composites with strong reflection loss, especially in the high frequency range. By considering good chemical homogeneity and microwave absorption, we believe the as-fabricated Fe3O4@C composites can be promising candidates as highly effective microwave absorbers.
Developing high-safety Li-metal anodes (LMAs) is extremely important for the application of high-energy Li-metal batteries (LMBs), especially Li-S and Li-O
2
battery systems. However, the notorious ...Li-dendrite growth problem results in serious safety concerns for any energy storage application. Through a recent combination of interface-based science, nanotechnology-based solutions and characterization methods, the LMA is now primed for a technological boom. In this review, the recent emerging strategies and perspectives on LMAs are summarized, following which the current huge evolution in interfacial chemistry regulation, optimizing electrolyte components, designing a rational 'host' for lithium metal, optimizing "solid-state electrolytes" and other emerging strategies for developing high-safety LMAs is highlighted. Furthermore, several state-of-the-art
in situ
/
operando
synchrotron-based X-ray techniques for high safety LMB research are introduced. With the further development of LMAs in the future, subsequent application in high energy LMBs is to be expected.
Developing high-safety Li-metal anodes (LMAs) are extremely important for the application of high-energy Li-metal batteries. The recently state-of-the-art technologies, strategies and perspectives for developing LMAs are comprehensively summarized in this review.
Conductive hydrogels have become one of the most promising materials for skin-like sensors because of their excellent biocompatibility and mechanical flexibility. However, the limited stretchability, ...low toughness, and fatigue resistance lead to a narrow sensing region and insufficient durability of the hydrogel-based sensors. In this work, an extremely stretchable, highly tough, and anti-fatigue conductive nanocomposite hydrogel is prepared by integrating hydrophobic carbon nanotubes (CNTs) into hydrophobically associated polyacrylamide (HAPAAm) hydrogel. In this conductive hydrogel, amphiphilic sodium dodecyl sulfate was used to ensure uniform dispersion of CNTs in the hydrogel network, and hydrophobic interactions between the hydrogel matrix and the CNT surface formed, greatly improving the mechanical properties of the hydrogel. The obtained CNTs/HAPAAm hydrogel showed excellent stretchability (ca. 3000%), toughness (3.42 MJ m–3), and great anti-fatigue property. Moreover, it exhibits both high tensile strain sensitivity in the wide strain ranges (gauge factor = 4.32, up to 1000%) and high linear sensitivity (0.127 kPa–1) in a large-pressure region within 0–50 kPa. The CNTs/HAPAAm hydrogel-based sensors can sensitively and stably detect full-range human activities (e.g., elbow rotation, finger bending, swallowing motion, and pronouncing) and handwriting, demonstrating the CNTs/HAPAAm hydrogel’s potential as the wearable strain and pressure sensors for flexible devices.
We show that bimetallic nanoparticles (NPs) of AuPt without any surface modification are potent antibiotic reagents, while pure Au NPs or pure Pt NPs display no antibiotic activities. The most potent ...antibacterial AuPt NPs happen to be the most effective catalysts for chemical transformations. The mechanism of antibiotic action includes the dissipation of membrane potential and the elevation of adenosine triphosphate (ATP) levels. These bimetallic NPs are unique in that they do not produce reactive oxygen species as most antibiotics do. Being non‐toxic to human cells, these bimetallic noble NPs might open an entry to a new class of antibiotics.
No side‐effect: Bimetallic nanoparticles of AuPt are potent antibiotic reagents with low cytotoxicity. The antibiotic mechanism includes the rupture in the bacterial inner membrane and the increase of intracellular adenosine triphosphate levels, but does not involve the generation of reactive oxygen species (see picture).
In comparison with graphene sheets, graphene quantum dots (GQDs) exhibit novel chemical/physical properties including nanometer-size, abundant edge defects, good electrical conductivity, high ...mobility, chemical inertia, stable photoluminescence and better surface grafting, making them promising for fabricating various novel devices. In the present work, an asymmetric micro-supercapacitor, using GQDs as negative active material and polyaniline (PANI) nanofibers as positive active material, is built for the first time by a simple and controllable two-step electro-deposition on interdigital finger gold electrodes. Electrochemical measurements reveal that the as-made GQDs//PANI asymmetric micro-supercapacitor has a more excellent rate capability (up to 1000 V s(-1)) than previously reported electrode materials, as well as faster power response capability (with a very short relaxation time constant of 115.9 μs) and better cycling stability after 1500 cycles in aqueous electrolyte. On this basis, an all-solid-state GQDs//PANI asymmetric micro-supercapacitor is fabricated using H3PO4-polyvinyl alcohol gel as electrolyte, which also exhibits desirable electrochemical capacitive performances. These encouraging results presented here may open up new insight into GQDs with highly promising applications in high-performance energy-storage devices, and further expand the potential applications of GQDs beyond the energy-oriented application of GQDs discussed above.
Microsupercapacitors (MSCs), as one type of significant power source or energy storage unit in microelectronic devices, have attracted more and more attention. However, how to reasonably design ...electrode structures and exploit the active materials to endow the MSCs with excellent performances in a limited surface area still remains a challenge. Here, a reduced graphene oxide (RGO)/manganese dioxide (MnO2)/silver nanowire (AgNW) ternary hybrid film (RGMA ternary hybrid film) is successfully fabricated by a facile vacuum filtration and subsequent thermal reduction, and is used directly as a binder-free electrode for MSCs. Additionally, a flexible, transparent, all-solid state RMGA-MSC is also built, and its electrochemical performance in an ionic liquid gel electrolyte are investigated in depth. Notably, the RGMA-MSCs display superior electrochemical properties, including exceptionally high rate capability (up to 50000 mV·s–1), high frequency response (very short corresponding time constant τ0 = 0.14 ms), and excellent cycle stability (90.3% of the initial capacitance after 6000 cycles in ionic liquid gel electrolyte). Importantly, the electrochemical performance of RGMA-MSCs shows a strong dependence on the geometric parameters including the interspace between adjacent fingers and the width of the finger of MSCs. These encouraging results may not only provide important references for the design and fabrication of high-performance MSCs, but also make the RGMA ternary hybrid film promising for the next generation film lithium ion batteries and other energy storage devices.
GRP78 in lung cancer Xia, Shengkai; Duan, Wenzhe; Liu, Wenwen ...
Journal of translational medicine,
03/2021, Letnik:
19, Številka:
1
Journal Article
Recenzirano
Odprti dostop
Glucose-regulating protein 78 (GRP78) is a molecular chaperone in the endoplasmic reticulum (ER) that promotes folding and assembly of proteins, controls the quality of proteins, and regulates ER ...stress signaling through Ca
binding to the ER. In tumors, GRP78 is often upregulated, acting as a central stress sensor that senses and adapts to changes in the tumor microenvironment, mediating ER stress of cancer cells under various stimulations of the microenvironment to trigger the folding protein response. Increasing evidence has shown that GRP78 is closely associated with the progression and poor prognosis of lung cancer, and plays an important role in the treatment of lung cancer. Herein, we reviewed for the first time the functions and mechanisms of GRP78 in the pathological processes of lung cancer, including tumorigenesis, apoptosis, autophagy, progression, and drug resistance, giving a comprehensive understanding of the function of GRP78 in lung cancer. In addition, we also discussed the potential role of GRP78 as a prognostic biomarker and therapeutic target for lung cancer, which is conducive to improving the assessment of lung cancer and the development of new therapeutic interventions.
Lodging under nitrogen (N)-luxury conditions substantially reduces crop yield and seed quality. However, the molecular mechanisms of plant lodging resistance remain largely unclear, especially in ...maize. We report here that the expression of ZmmiR528, a monocot-specific microRNA, is induced by N luxury but reduced by N deficiency. We show by the thioacidolysis and acetyl bromide analysis that N luxury significantly reduces the generation of H, G, and S monomers of the lignin as well as its total content in maize shoots. We further demonstrate that ZmLACCASE3 (ZmLAC3) and ZmLACCASE5 (ZmLAC5), which encode the copper-containing laccases, are the targets of ZmmiR528. In situ hybridization showed that ZmmiR528 is mainly expressed in maize vascular tissues. Knockdown of ZmmiR528 or overexpression of ZmLAC3 significantly increased the lignin content and rind penetrometer resistance of maize stems. In contrast, transgenic maize plants overexpressing ZmmiR528 had reduced lignin content and rind penetrometer resistance and were prone to lodging under N-luxury conditions. RNA-sequencing analysis revealed that ZmPAL7 and ZmPAL8 are upregulated in transgenic maize lines downregulating ZmmiR528. Under N-luxury conditions, the expression levels of ZmPALs were much higher in ZmmiR528-knockdown lines than in the wild type and transgenic maize lines overexpressing ZmmiR528. Taken together, these results indicate that, by regulating the expression of ZmLAC3 and ZmLAC5, ZmmiR528 affects maize lodging resistance under N-luxury conditions.
This study quantitatively determined that the maize lodging under N-luxury conditions results in part from a reduction in the contents of lignin monomers and total lignin. Unlike miR528 in rice, which functions in immune responses, ZmmiR528 affects lignin biosynthesis in maize by negative regulation of ZmLACs. Zm-miRNA528 and ZmLAC modules might be useful for improving the agronomic traits of maize.
PDF
