A single-photon source is an enabling technology in device-independent quantum communication
, quantum simulation
, and linear optics-based
and measurement-based quantum computing
. These ...applications employ many photons and place stringent requirements on the efficiency of single-photon creation. The scaling on efficiency is typically an exponential function of the number of photons. Schemes taking full advantage of quantum superpositions also depend sensitively on the coherence of the photons, that is, their indistinguishability
. Here, we report a single-photon source with a high end-to-end efficiency. We employ gated quantum dots in an open, tunable microcavity
. The gating provides control of the charge and electrical tuning of the emission frequency; the high-quality material ensures low noise; and the tunability of the microcavity compensates for the lack of control in quantum dot position and emission frequency. Transmission through the top mirror is the dominant escape route for photons from the microcavity, and this output is well matched to a single-mode fibre. With this design, we can create a single photon at the output of the final optical fibre on-demand with a probability of up to 57% and with an average two-photon interference visibility of 97.5%. Coherence persists in trains of thousands of photons with single-photon creation at a repetition rate of 1 GHz.
The strong-coupling regime of cavity quantum electrodynamics (QED) represents the light-matter interaction at the fully quantum level. Adding a single photon shifts the resonance frequencies-a ...profound nonlinearity. Cavity QED is a test bed for quantum optics
and the basis of photon-photon and atom-atom entangling gates
. At microwave frequencies, cavity QED has had a transformative effect
, enabling qubit readout and qubit couplings in superconducting circuits. At optical frequencies, the gates are potentially much faster; the photons can propagate over long distances and can be easily detected. Following pioneering work on single atoms
, solid-state implementations using semiconductor quantum dots are emerging
. However, miniaturizing semiconductor cavities without introducing charge noise and scattering losses remains a challenge. Here we present a gated, ultralow-loss, frequency-tunable microcavity device. The gates allow both the quantum dot charge and its resonance frequency to be controlled electrically. Furthermore, cavity feeding
, the observation of the bare-cavity mode even at the quantum dot-cavity resonance, is eliminated. Even inside the microcavity, the quantum dot has a linewidth close to the radiative limit. In addition to a very pronounced avoided crossing in the spectral domain, we observe a clear coherent exchange of a single energy quantum between the 'atom' (the quantum dot) and the cavity in the time domain (vacuum Rabi oscillations), whereas decoherence arises mainly via the atom and photon loss channels. This coherence is exploited to probe the transitions between the singly and doubly excited photon-atom system using photon-statistics spectroscopy
. The work establishes a route to the development of semiconductor-based quantum photonics, such as single-photon sources and photon-photon gates.
Abstract
Quantum dots are both excellent single-photon sources and hosts for single spins. This combination enables the deterministic generation of Raman-photons—bandwidth-matched to an atomic ...quantum-memory—and the generation of photon cluster states, a resource in quantum communication and measurement-based quantum computing. GaAs quantum dots in AlGaAs can be matched in frequency to a rubidium-based photon memory, and have potentially improved electron spin coherence compared to the widely used InGaAs quantum dots. However, their charge stability and optical linewidths are typically much worse than for their InGaAs counterparts. Here, we embed GaAs quantum dots into an
n
-
i
-
p
-diode specially designed for low-temperature operation. We demonstrate ultra-low noise behaviour: charge control via Coulomb blockade, close-to lifetime-limited linewidths, and no blinking. We observe high-fidelity optical electron-spin initialisation and long electron-spin lifetimes for these quantum dots. Our work establishes a materials platform for low-noise quantum photonics close to the red part of the spectrum.
Environmental DNA (eDNA) techniques are gaining attention as cost-effective, non-invasive strategies for acquiring information on fish and other aquatic organisms from water samples. Currently, eDNA ...approaches are used to detect specific fish species and determine fish community diversity. Various protocols used with eDNA methods for aquatic organism detection have been reported in different eDNA studies, but there are no general recommendations for fish detection. Herein, we reviewed 168 papers to supplement and highlight the key criteria for each step of eDNA technology in fish detection and provide general suggestions for eliminating detection errors. Although there is no unified recommendation for the application of diverse eDNA in detecting fish species, in most cases, 1 or 2 L surface water collection and eDNA capture on 0.7-μm glass fiber filters followed by extraction with a DNeasy Blood and Tissue Kit or PowerWater DNA Isolation Kit are useful for obtaining high-quality eDNA. Subsequently, species-specific quantitative polymerase chain reaction (qPCR) assays based on mitochondrial cytochrome b gene markers or eDNA metabarcoding based on both
and
markers via high-throughput sequencing can effectively detect target DNA or estimate species richness. Furthermore, detection errors can be minimized by mitigating contamination, negative control, PCR replication, and using multiple genetic markers. Our aim is to provide a useful strategy for fish eDNA technology that can be applied by researchers, advisors, and managers.
Improving the quantum coherence of solid-state systems that mimic two-level atoms, for instance spin qubits or single-photon emitters using semiconductor quantum dots, involves dealing with the noise ...inherent to the device. Charge noise results in a uctuating electric eld, spin noise in a uctuating magnetic eld at the location of the qubit, and both can lead to dephasing and decoherence of optical and spin states. We investigate noise in an ultrapure semiconductor device using a minimally invasive, ultrasensitive local probe: resonance uorescence from a single quantum dot. We distinguish between charge noise and spin noise through a crucial difference in their optical signatures. Noise spectra for both electric and magnetic elds are derived from 0.1 Hz to 100 kHz. The charge noise dominates at low frequencies, spin noise at high frequencies. The noise falls rapidly with increasing frequency, allowing us to demonstrate transform-limited quantum-dot optical linewidths by operating the device above 50 kHz.
Developing a quantum photonics network requires a source of very-high-fidelity single photons. An outstanding challenge is to produce a transform-limited single-photon emitter to guarantee that ...single photons emitted far apart in the time domain are truly indistinguishable. This is particularly difficult in the solid-state as the complex environment is the source of noise over a wide bandwidth. A quantum dot is a robust, fast, bright and narrow-linewidth emitter of single photons; layer-by-layer growth and subsequent nano-fabrication allow the electronic and photonic states to be engineered. This represents a set of features not shared by any other emitter but transform-limited linewidths have been elusive. Here, we report transform-limited linewidths measured on second timescales, primarily on the neutral exciton but also on the charged exciton close to saturation. The key feature is control of the nuclear spins, which dominate the exciton dephasing via the Overhauser field.
In quantum dots (QDs), the Auger recombination is a nonradiative process in which the electron–hole recombination energy is transferred to an additional carrier. It has been studied mostly in ...colloidal QDs, where the Auger recombination time is in the picosecond range and efficiently quenches the light emission. In self-assembled QDs, on the other hand, the influence of Auger recombination on the optical properties is in general neglected, assuming that it is masked by other processes such as spin and charge fluctuations. Here, we use time-resolved resonance fluorescence to analyze the Auger recombination and its influence on the optical properties of a single self-assembled QD. From excitation-power-dependent measurements, we find a long Auger recombination time of about 500 ns and a quenching of the trion transition by about 80%. Furthermore, we observe a broadening of the trion transition line width by up to a factor of 2. With a model based on rate equations, we are able to identify the interplay between tunneling and Auger rate as the underlying mechanism for the reduced intensity and the broadening of the line width. This demonstrates that self-assembled QDs can serve as an ideal model system to study how the charge recapture process, given by the band-structure surrounding the confined carriers, influences the Auger process. Our findings are not only relevant for improving the emission properties of colloidal QD-based emitters and dyes, which have recently entered the consumer market, but also of interest for more visionary applications, such as quantum information technologies, based on self-assembled quantum dots.
Abstract
Semiconductor spin qubits have recently seen major advances in coherence time and control fidelities, leading to a single-qubit performance that is on par with other leading qubit platforms. ...Most of this progress is based on microwave control of single spins in devices made of isotopically purified silicon. For controlling spins, the exchange interaction is an additional key ingredient which poses new challenges for high-fidelity control. Here, we demonstrate exchange-based single-qubit gates of two-electron spin qubits in GaAs double quantum dots. Using careful pulse optimization and closed-loop tuning, we achieve a randomized benchmarking fidelity of (99.50±0.04)% and a leakage rate of 0.13% out of the computational subspace. These results open new perspectives for microwave-free control of singlet-triplet qubits in GaAs and other materials.
Environmental DNA (eDNA) techniques refer to utilizing the organisms’ DNA extracted from environment samples to genetically identify target species without capturing actual organisms. eDNA ...metabarcoding via high‐throughput sequencing can simultaneously detect multiple fish species from a single water sample, which is a powerful tool for the qualitative detection and quantitative estimates of multiple fish species. However, sequence counts obtained from eDNA metabarcoding may be influenced by many factors, of which primer bias is one of the foremost causes of methodological error. The performance of 18 primer pairs for COI, cytb, 12S rRNA, and 16S rRNA mitochondrial genes, which are all frequently used in fish eDNA metabarcoding, were evaluated in the current study. The ribosomal gene markers performed better than the protein‐coding gene markers during in silico screening, resulting in higher taxonomic coverage and appropriate barcode lengths. Four primer pairs—AcMDB07, MiFish‐U, Ve16S1, and Ve16S3—designed for various regions of the 12S and 16S rRNA genes were screened for tank metabarcoding in a case study targeting six freshwater fish species. The four primer pairs were able to accurately detect all six species in different tanks, while only MiFish‐U, Ve16S1, and Ve16S3 revealed a significant positive relationship between species biomass and read count for the pooled tank data. The positive relationship could not be found in all species within the tanks. Additionally, primer efficiency differed depending on the species while primer preferential species varied in different fish assemblages. This case study supports the potential for eDNA metabarcoding to assess species diversity in natural ecosystems and provides an alternative strategy to evaluate the performance of candidate primers before application of eDNA metabarcoding in natural ecosystems.
The maintenance of fish diversity is critical for aquatic ecosystem healthy, but in order to properly evaluate this, we must ensure that the tools used are properly evaluated and that we know how to identify problems or biases. As aquatic ecosystem management is a global issue, we feel that this research will have a broad audience in the world of freshwater and marine ecosystem research.
The spin of an electron is a promising memory state and qubit. Connecting spin states that are spatially far apart will enable quantum nodes and quantum networks based on the electron spin. Towards ...this goal, an integrated spin-photon interface would be a major leap forward as it combines the memory capability of a single spin with the efficient transfer of information by photons. Here, we demonstrate such an efficient and optically programmable interface between the spin of an electron in a quantum dot and photons in a nanophotonic waveguide. The spin can be deterministically prepared in the ground state with a fidelity of up to 96%. Subsequently, the system is used to implement a single-spin photonic switch, in which the spin state of the electron directs the flow of photons through the waveguide. The spin-photon interface may enable on-chip photon-photon gates, single-photon transistors and the efficient generation of a photonic cluster state.
PDF
