Nanoscale deformations and corrugations occur in graphene-like two-dimensional materials during their incorporation into hybrid structures and real devices, such as sensors based on surface-enhanced ...Raman scattering (SERS-based sensors). The structural features mentioned above are known to affect the electronic properties of graphene, thus highly sensitive and high-resolution techniques are required to reveal and characterize arising local defects, mechanical deformations, and phase transformations. In this study, we demonstrate that gap-mode tip-enhanced Raman Scattering (gm-TERS), which offers the benefits of structural and chemical analytical methods, allows variations in the structure and mechanical state of a two-dimensional material to be probed with nanoscale spatial resolution. In this work, we demonstrate locally enhanced gm-TERS on a monolayer graphene film placed on a plasmonic substrate with specific diameter gold nanodisks. SERS measurements are employed to determine the optimal disk diameter and excitation wavelength for further realization of gm-TERS. A significant local plasmonic enhancement of the main vibrational modes in graphene by a factor of 100 and a high spatial resolution of 10 nm are achieved in the gm-TERS experiment, making gm-TERS chemical mapping possible. By analyzing the gm-TERS spectra of the graphene film in the local area of a nanodisk, the local tensile mechanical strain in graphene was detected, resulting in a split of the G mode into two components, G
+
and G
−
. Using the frequency split in the positions of G
+
and G
−
modes in the TERS spectra, the stress was estimated to be up to 1.5%. The results demonstrate that gap-mode TERS mapping allows rapid and precise characterization of local structural defects in two-dimensional materials on the nanoscale.
Nanoscale deformations and corrugations occur in graphene-like two-dimensional materials during their incorporation into hybrid structures and real devices, such as sensors based on surface-enhanced Raman scattering (SERS-based sensors).
Tip-enhanced Raman scattering (TERS) has recently emerged as a powerful technique for studying the local properties of low dimensional materials. Being a plasmon driven system, a dramatic enhancement ...of the TERS sensitivity can be achieved by an appropriate choice of the plasmonic substrate in the so-called gap-mode configuration. Here, we investigate the phonon properties of CdSe nanocrystals (NCs) utilizing gap-mode TERS. Using the Langmuir-Blodgett technique, we homogeneously deposited submonolayers of colloidal CdSe NCs on two different nanostructured plasmonic substrates. Amplified by resonant gap-mode TERS, the scattering by the optical phonon modes of CdSe NCs is markedly enhanced making it possible to observe up to the third overtone of the LO mode reliably. The home-made plasmonic substrates and TERS tips allow the analysis of the TERS images of CdSe phonon modes with nanometer spatial resolution. The CdSe phonon scattering intensity is strongly correlated with the local electromagnetic field distribution across the plasmonic substrates.
We demonstrated resonant/non-resonant gap-mode TERS on CdSe nanocrystals analyzing of LO (up to 3rd order), SO/TO phonons, as well as Se vibrational modes.
Display omitted
•SiOx nanowires were fabricated by local anodic oxidation using an AFM on Si (111) and investigated by nano-IR spectroscopy. The analysis of the optical phonon frequencies allowed ...determining the composition × with a nanometer spatial resolution. According to nano-FTIR results, the composition × is varied from 1.6 at the center towards 1.4 at the edges of SiOx nanowires.
Scanning-probe-based patterning methods including local anodic oxidation have been widely used in nanotechnology to form various nanoelectronic device structures. However, so far spectroscopic investigations e.g. to determine the stoichiometry of oxide nanostructures with characteristic sizes below the diffraction limit do not exist. Using near-field infrared spectroscopy, we study the vibrational optical modes in SiOx nanowires with a height (width) of 2.1 nm (350 nm). The nanowires were produced by oxidation employing an atomic force microscope (AFM) on wide Si (111) terraces. The analysis of the spectroscopic data allows us to determine the composition of SiOx with a spatial resolution far below the diffraction limit. The composition × across SiOx nanowires is found to decrease from 1.6 in the center of the nanowire to 1.4 at its edges.
We report on the study of localized surface plasmon resonances (LSPRs) arising in arrays of metal (Au) nanoclusters, dimers, and nanoantennas under the influence of external electromagnetic ...radiation. Using nanolithography, the plasmonic arrays with different morphologies including cylindrical nanoclusters and dimers, linear and H-type nanoantennas were fabricated. Their LSPR frequencies were determined from the analysis of optical reflection and IR spectra. LSPR frequency depends strongly on morphology of metal nanostructures and is varied from visible to terahertz spectral range with variation of the structures from cylindrical nanoclusters to the nanoantennas with a high aspect ratio. We established the interconnection between the structural parameters of the plasmonic arrays and their LSPR frequencies based on the results of 3D electrodynamic simulations.
We report on a study of surface-enhanced infrared absorption (SEIRA) by optical phonons in monolayers (MLs) of CdSe, CdS, and PbS nanocrystals (NCs) deposited on arrays of linear nanoantennas the ...optimized structural parameters of which allow coupling between the localized surface plasmon resonance (LSPR) and diffraction modes in the far-infrared spectral region. The Langmuir–Blodgett technique was used for homogeneous deposition of the NCs. The structural parameters of the arrays and the NC MLs were determined by scanning electron microscopy. According to the three-dimensional electrodynamic simulations of the electromagnetic field distribution around the antennas, the maximal SEIRA enhancement is realized for an array period of about 15 μm when the energy of a diffraction mode coincides with that of the LSPR mode. SEIRA experimental results are in perfect quantitative agreement with the simulation. The maximal SEIRA enhancement is observed for the nanoantenna length and transverse periodicity predicted by the simulations. The frequency positions of the absorption features indicate that only the NC surface optical phonons are activated in the SEIRA spectra.
BSTS epitaxial thin film topological insulators were grown using the MBE technique on two different types of substrates i.e., Si (111) and SiC/graphene with Bi0.7Sb1.6Te1.8Se0.9 and ...Bi0.9Sb1.5Te1.8Se1.1, respectively. The crystallographic properties of BSTS films were investigated via X-ray diffraction, which showed the strongest reflections from the (0 0 l) facets corresponding to the rhombohedral phase. Superior epitaxial growth, homogeneous thickness, smooth surfaces, and larger unit cell parameters were observed for the films grown on the Si substrate. Polarization dependent Raman spectroscopy showed a weak appearance of the Ag mode in cross--polarized geometry. In contrast, a strong Eg mode was observed in both parallel and cross-polarized geometries which correspond to the rhombohedral crystal symmetry of BSTS films. A redshift of Ag and Eg modes was observed in the Raman spectra of BSTS films grown on the Si substrate, compared to those on SiC/graphene, which was directly associated with the unit cell parameter and composition of the films. Raman spectra showed four fundamental modes with asymmetric line shape, and deconvolution of the peaks resulted in additional modes in both the BSTS thin films. The sum of relative ratios of linewidths of fundamental modes (Ag and Eg) of BSTS films grown on Si substrate was lower, indicating a more ordered structure with lower contribution of defects as compared to BSTS film grown on SiC/graphene substrate.
BSTS epitaxial thin film topological insulators were grown using the MBE technique on two different types of substrates
, Si (111) and SiC/graphene with Bi
Sb
Te
Se
and Bi
Sb
Te
Se
, respectively. ...The crystallographic properties of BSTS films were investigated
X-ray diffraction, which showed the strongest reflections from the (0 0
) facets corresponding to the rhombohedral phase. Superior epitaxial growth, homogeneous thickness, smooth surfaces, and larger unit cell parameters were observed for the films grown on the Si substrate. Polarization dependent Raman spectroscopy showed a weak appearance of the A
mode in cross--polarized geometry. In contrast, a strong E
mode was observed in both parallel and cross-polarized geometries which correspond to the rhombohedral crystal symmetry of BSTS films. A redshift of A
and E
modes was observed in the Raman spectra of BSTS films grown on the Si substrate, compared to those on SiC/graphene, which was directly associated with the unit cell parameter and composition of the films. Raman spectra showed four fundamental modes with asymmetric line shape, and deconvolution of the peaks resulted in additional modes in both the BSTS thin films. The sum of relative ratios of linewidths of fundamental modes (A
and E
) of BSTS films grown on Si substrate was lower, indicating a more ordered structure with lower contribution of defects as compared to BSTS film grown on SiC/graphene substrate.
This work is devoted to the study of plasmon-enhanced Raman scattering by the fundamental vibrational modes of multilayered graphene films. The film thickness was ∼3.5 nm, which corresponds to ∼10 ...monolayers. Multilayered graphene films were placed on a plasmonic substrate consisting of arrays of gold nanodisks (50–250 nm in diameter). Surface-enhanced Raman scattering by the main vibrational modes of multilayered graphene film placed on an array of Au nanodisks of various sizes was implemented. The measurements were performed at excitation wavelengths of 532, 638, and 785 nm. A resonant SERS enhancement of the main vibrational modes of multilayered graphene by a factor of 25 was achieved for nanodisks with a diameter of 103 nm upon excitation at 638 nm. A stronger local enhancement of Raman scattering in multilayered graphene (by a factor of 50) placed on Au nanodisk array is achieved using gap-mode tip-enhanced Raman scattering (gap-mode TERS). Nanofolds in the graphene film appeared due to the corrugated surface of the plasmonic substrate were visualized with nanometer spatial resolution. It is shown that the frequency positions of G and 2D modes of nanofolds decrease with respect to the corresponding values in flat multilayered graphene manifesting mechanical stresses in the nanofolds up to 0.7%. The results obtained shed light on the effects of the interaction of multilayered graphene with metal nanostructures and are important in creating hybrid metal/graphene plasmonic substrates.
We report on the study of surface enhanced infrared absorption (SEIRA) by steroid hormone cortisol molecules with different concentrations deposited on linear Au nanoantenna arrays. Localized surface ...plasmon resonances (LSPRs) arise in the nanoantennas under the influence of external electromagnetic radiation. LSPR frequency depends mainly on the nanoantenna length and can vary from the visible to the terahertz range. We establish the ratio between the structural parameters of nanoantenna arrays and LSPR frequencies based on the results of 3D electrodynamic simulations. Using nanolithography we fabricate nanoantenna arrays having LSPR frequencies close to the frequencies of the most intense absorption modes of steroid hormone cortisol. We deposit cortisol molecules onto the surface of nanoantenna arrays by drop- coating. SEIRA spectra of the nanoantenna arrays make it possible the determination of the presence of cortisol and establishing the sensitivity limit of this method. Thus, we show possibility of SEIRA application for cortisol concentration analysis.
Using the method of dynamic thermogravimetry and differential scanning calorimetry in the heating rate range 0.46–10.0 deg
–1
min
–1
, evaporation of the plasticizer from propellant samples of the ...NEPE type was investigated. The experiments were carried out in an open system in a flow of pure argon at atmospheric pressure. Nitroglycerin is the main mass fraction of the plasticizer. The activation energy
E
of the gross evaporation–diffusion process is determined by various methods. Heat of evaporation of the plasticizer Δ
H
v
is estimated. It is shown that in the early stage of evaporation the values of
E
and Δ
H
v
practically coincide. At a temperature of 298.15 K Δ
H
v
= 89 ± 4 kJ mol
–1
, which is in satisfactory agreement with the literature data for heat of evaporation of pure nitroglycerin. With any way of preventing free removal of the plasticizer from the surface of the samples on the DSC thermograms successive exothermic peaks of the thermal decomposition of the plasticizer and the octogen are observed, which are not realized in the open system for the indicated heating rates at
T
< 190°C.