ABSTRACT
The smooth spin-down of young pulsars is perturbed by two non-deterministic phenomenon, glitches, and timing noise. Although the timing noise provides insights into nuclear and plasma ...physics at extreme densities, it acts as a barrier to high-precision pulsar timing experiments. An improved methodology based on the Bayesian inference is developed to simultaneously model the stochastic and deterministic parameters for a sample of 85 high-$\dot{E}$ radio pulsars observed for ∼10 yr with the 64-m Parkes radio telescope. Timing noise is known to be a red process and we develop a parametrization based on the red-noise amplitude (Ared) and spectral index (β). We measure the median Ared to be $-10.4^{+1.8}_{-1.7}$ yr3/2 and β to be $-5.2^{+3.0}_{-3.8}$ and show that the strength of timing noise scales proportionally to $\nu ^{1}|\dot{\nu }|^{-0.6\pm 0.1}$, where ν is the spin frequency of the pulsar and $\dot{\nu }$ is its spin-down rate. Finally, we measure significant braking indices for 19 pulsars and proper motions for 2 pulsars, and discuss the presence of periodic modulation in the arrival times of 5 pulsars.
Abstract
We present the first interferometric detections of fast radio bursts (FRBs), an enigmatic new class of astrophysical transient. In a 180-d survey of the Southern sky, we discovered three ...FRBs at 843 MHz with the UTMOST array, as a part of commissioning science during a major ongoing upgrade. The wide field of view of UTMOST (≈9 deg2) is well suited to FRB searches. The primary beam is covered by 352 partially overlapping fan-beams, each of which is searched for FRBs in real time with pulse widths in the range 0.655–42 ms, and dispersion measures ≤2000 pc cm−3. Detections of FRBs with the UTMOST array place a lower limit on their distances of ≈104 km (limit of the telescope near-field) supporting the case for an astronomical origin. Repeating FRBs at UTMOST or an FRB detected simultaneously with the Parkes radio telescope and UTMOST would allow a few arcsec localization, thereby providing an excellent means of identifying FRB host galaxies, if present. Up to 100 h of followup for each FRB has been carried out with the UTMOST, with no repeating bursts seen. From the detected position, we present 3σ error ellipses of 15 arcsec × 8
${^{\circ}_{.}}$
4 on the sky for the point of origin for the FRBs. We estimate an all-sky FRB rate at 843 MHz above a fluence
$\cal F_\mathrm{lim}$
of 11 Jy ms of ∼78 events sky−1 d−1 at the 95 per cent confidence level. The measured rate of FRBs at 843 MHz is two times higher than we had expected, scaling from the FRB rate at the Parkes radio telescope, assuming that FRBs have a flat spectral index and a uniform distribution in Euclidean space. We examine how this can be explained by FRBs having a steeper spectral index and/or a flatter logN–log
$\mathcal {F}$
distribution than expected for a Euclidean Universe.
ABSTRACT
We report on a timing programme of 74 young pulsars that have been observed by the Parkes 64-m radio telescope over the past decade. Using modern Bayesian timing techniques, we have measured ...the properties of 124 glitches in 52 of these pulsars, of which 74 are new. We demonstrate that the glitch sample is complete to fractional increases in spin frequency greater than $\Delta \nu ^{90{{\ \rm per\ cent}}}_{\mathrm{ g}}/\nu \approx 8.1 \times 10^{-9}$ . We measure values of the braking index, n, in 33 pulsars. In most of these pulsars, their rotational evolution is dominated by episodes of spin-down with n > 10, punctuated by step changes in the spin-down rate at the time of a large glitch. The step changes are such that, averaged over the glitches, the long-term n is small. We find a near one-to-one relationship between the interglitch value of n and the change in spin-down of the previous glitch divided by the interglitch time interval. We discuss the results in the context of a range of physical models.
ABSTRACT
Pulsar timing array projects measure the pulse arrival times of millisecond pulsars for the primary purpose of detecting nanohertz-frequency gravitational waves. The measurements include ...contributions from a number of astrophysical and instrumental processes, which can either be deterministic or stochastic. It is necessary to develop robust statistical and physical models for these noise processes because incorrect models diminish sensitivity and may cause a spurious gravitational wave detection. Here we characterize noise processes for the 26 pulsars in the second data release of the Parkes Pulsar Timing Array using Bayesian inference. In addition to well-studied noise sources found previously in pulsar timing array data sets such as achromatic timing noise and dispersion measure variations, we identify new noise sources including time-correlated chromatic noise that we attribute to variations in pulse scattering. We also identify ‘exponential dip’ events in four pulsars, which we attribute to magnetospheric effects as evidenced by pulse profile shape changes observed for three of the pulsars. This includes an event in PSR J1713+0747, which had previously been attributed to interstellar propagation. We present noise models to be used in searches for gravitational waves. We outline a robust methodology to evaluate the performance of noise models and identify unknown signals in the data. The detection of variations in pulse profiles highlights the need to develop efficient profile domain timing methods.
The degradation of SiC‐based ceramic matrix composites (CMCs) in conditions typical of gas turbine engine operation proceeds via the stress rupture of fiber bundles. The degradation is accelerated ...when oxygen and water invade the composite through matrix microcracks and react with fiber coatings and the fibers themselves. We review micromechanical models of the main rate‐determining phenomena involved, including the diffusion of gases and reaction products through matrix microcracks, oxidation of SiC (in both matrix and fibers) leading to the loss of stiffness and strength in exposed fibers, the formation of oxide scale on SiC fiber and along matrix crack surfaces that cause the partial closure of microcracks, and the concomitant and synergistic loss of BN fiber coatings. The micromechanical models could be formulated as time‐dependent coupled differential equations in time, which must be solved dynamically, e.g., as an iterated user‐defined material element, within a finite element simulation. A paradigm is thus established for incorporating the time‐dependent evolution of local material properties according to the local environmental and stress conditions that exist within a material, in a simulation of the damage evolution of a composite component. We exemplify the calibration of typical micromechanical degradation models using thermodynamic data for the oxidation and/or volatilization of BN and SiC by oxygen and water, mechanical test data for the rate of stress rupture of SiC fibers, and kinetic data for the processes involved in gas permeation through microcracks. We discuss approaches for validating computational simulations that include the micromechanical models of environmental degradation. A special challenge is achieving validated predictions of trends with temperature, which are expected to vary in a complex manner during use.
Spatial scales in crystal plasticity are understood to influence flow stresses and work-hardening rates. A direct assessment of the crystal-size dependence of the critical resolved shear stress has ...been made for single-slip oriented crystals of pure Ni having sample diameters that range from 40 to 1.0
μm. The sample dimensions directly limit the length scales available for plasticity, but without significant external or kinematical constraint. The results show strength increases of up to 15 times over pure Ni and size-affected hardening rates. Stresses are lower, but strengthening persists to larger sizes than for the prior work on face-centered cubic metal whiskers. The results emphasize that at the micron-size scale and below both external geometry and internal structure affect the micromechanisms of deformation and strength.
Abstract
A nanohertz-frequency stochastic gravitational-wave background can potentially be detected through the precise timing of an array of millisecond pulsars. This background produces ...low-frequency noise in the pulse arrival times that would have a characteristic spectrum common to all pulsars and a well-defined spatial correlation. Recently the North American Nanohertz Observatory for Gravitational Waves collaboration (NANOGrav) found evidence for the common-spectrum component in their 12.5 yr data set. Here we report on a search for the background using the second data release of the Parkes Pulsar Timing Array. If we are forced to choose between the two NANOGrav models—one with a common-spectrum process and one without—we find strong support for the common-spectrum process. However, in this paper, we consider the possibility that the analysis suffers from model misspecification. In particular, we present simulated data sets that contain noise with distinctive spectra but show strong evidence for a common-spectrum process under the standard assumptions. The Parkes data show no significant evidence for, or against, the spatially correlated Hellings–Downs signature of the gravitational-wave background. Assuming we did observe the process underlying the spatially uncorrelated component of the background, we infer its amplitude to be
A
=
2.2
−
0.3
+
0.4
×
10
−
15
in units of gravitational-wave strain at a frequency of 1 yr
−1
. Extensions and combinations of existing and new data sets will improve the prospects of identifying spatial correlations that are necessary to claim a detection of the gravitational-wave background.
ABSTRACT
We present the first 2.5 yr of data from the MeerKAT Pulsar Timing Array (MPTA), part of MeerTime, a MeerKAT Large Survey Project. The MPTA aims to precisely measure pulse arrival times from ...an ensemble of 88 pulsars visible from the Southern hemisphere, with the goal of contributing to the search, detection, and study of nanohertz-frequency gravitational waves as part of the International Pulsar Timing Array. This project makes use of the MeerKAT telescope and operates with a typical observing cadence of 2 weeks using the L-band receiver that records data from 856 to 1712 MHz. We provide a comprehensive description of the observing system, software, and pipelines used and developed for the MeerTime project. The data products made available as part of this data release are from the 78 pulsars that had at least 30 observations between the start of the MeerTime programme in February 2019 and October 2021. These include both sub-banded and band-averaged arrival times and the initial timing ephemerides, noise models, and the frequency-dependent standard templates (portraits) used to derive pulse arrival times. After accounting for detected noise processes in the data, the frequency-averaged residuals of 67 of the pulsars achieved a root-mean-square residual precision of $\lt 1 \, \mu \rm {s}$. We also present a novel recovery of the clock correction waveform solely from pulsar timing residuals and an exploration into preliminary findings of interest to the international pulsar timing community. The arrival times, standards, and full Stokes parameter-calibrated pulsar timing archives are publicly available.
It is shown using thermodynamic analysis and kinetic modeling that a processing window exists for the formation of Y2Si2O7 coatings on SiC. The proposed method is validated using an experimental ...procedure in which the in situ formation of Y2Si2O7 on a commercial SiC‐based fiber is demonstrated. The method involves the deposition of YPO4 on preoxidized fine diameter SiC‐based fibers, and heat treating the coated fibers within a calculated processing window of oxygen partial pressure, temperature, degree of preoxidation, and coating thickness. The results are promising for the development of environmentally resistant interfacial coatings for SiC‐fiber reinforced SiC‐based matrix composites. The proposed and validated approach allows a low‐cost method to obtain continuous hermetic coatings on SiC fibers with interfacial properties adequate for tough composite behavior that resists degradation under turbine engine conditions.
ABSTRACT
In Paper I of this series, we detected a significant value of the braking index (n) for 19 young, high-$\dot{E}$ radio pulsars using ∼10 yr of timing observations from the 64-m Parkes radio ...telescope. Here, we investigate this result in more detail using a Bayesian pulsar timing framework to model timing noise and to perform selection to distinguish between models containing exponential glitch recovery and braking index signatures. We show that consistent values of n are maintained with the addition of substantial archival data, even in the presence of glitches. We provide strong arguments that our measurements are unlikely due to exponential recovery signals from unseen glitches even though glitches play a key role in the evolution of a pulsar’s spin frequency. We conclude that, at least over decadal time-scales, the value of n can be significantly larger than the canonical 3 and discuss the implications for the evolution of pulsars.