Shape memory polymers are at the forefront of recent materials research. Although the basic concept has been known for decades, recent advances in the research of shape memory polymers demand a ...unified approach to predict the shape memory performance under different thermo-temporal conditions. Here we report such an approach to predict the shape fixity and free recovery of thermo-rheologically simple shape memory polymers. The results show that the influence of programming conditions to free recovery can be unified by a reduced programming time that uniquely determines shape fixity, which consequently uniquely determines the shape recovery with a reduced recovery time. Furthermore, using the time-temperature superposition principle, shape recoveries under different thermo-temporal conditions can be extracted from the shape recovery under the reduced recovery time. Finally, a shape memory performance map is constructed based on a few simple standard polymer rheology tests to characterize the shape memory performance of the polymer.
Carbon‐fiber reinforced composites are prepared using catalyst‐free malleable polyimine networks as binders. An energy neutral closed‐loop recycling process has been developed, enabling recovery of ...100% of the imine components and carbon fibers in their original form. Polyimine films made using >21% recycled content exhibit no loss of mechanical performance, therefore indicating all of the thermoset composite material can be recycled and reused for the same purpose.
Folding is ubiquitous in nature with examples ranging from the formation of cellular components to winged insects. It finds technological applications including packaging of solar cells and space ...structures, deployable biomedical devices, and self-assembling robots and airbags. Here we demonstrate sequential self-folding structures realized by thermal activation of spatially-variable patterns that are 3D printed with digital shape memory polymers, which are digital materials with different shape memory behaviors. The time-dependent behavior of each polymer allows the temporal sequencing of activation when the structure is subjected to a uniform temperature. This is demonstrated via a series of 3D printed structures that respond rapidly to a thermal stimulus, and self-fold to specified shapes in controlled shape changing sequences. Measurements of the spatial and temporal nature of self-folding structures are in good agreement with the companion finite element simulations. A simplified reduced-order model is also developed to rapidly and accurately describe the self-folding physics. An important aspect of self-folding is the management of self-collisions, where different portions of the folding structure contact and then block further folding. A metric is developed to predict collisions and is used together with the reduced-order model to design self-folding structures that lock themselves into stable desired configurations.
3D printing of polymeric materials for various applications has been quickly developed in recent years. In contrast to thermoplastics, 3D printed thermosets, although desirable, are inherently ...non-recyclable due to their permanently crosslinked networks. As 3D printing is becoming more popular, it is desirable to develop recycling approaches for 3D printed parts in view of increasing polymer wastes. Here, we present a new thermosetting vitrimer epoxy ink and a 3D printing method that can 3D print epoxy into parts with complicated 3D geometries, which later can be recycled into a new ink for the next round of 3D printing. In the first printing cycle, a high-viscous ink is first slightly cured and is then printed at an elevated temperature into complicated 3D structures, followed by an oven cure using a two-step approach. To be recycled, the printed epoxy parts are fully dissolved in an ethylene glycol solvent in a sealed container at a high temperature. The dissolved polymer solution is reused for the next printing cycle using similar printing conditions. Our experiments demonstrate that the ink can be printed four times and still retains very good printability. In addition, the vitrimer epoxy can be used for pressure-free repairs for the 3D printed parts.
3D printing of epoxy-based shape memory polymers with high mechanical strength, excellent thermal stability and chemical resistance is highly desirable for practical applications. However, thermally ...cured epoxy in general is difficult to print directly. There have been limited numbers of successes in printing epoxy but they suffer from relatively poor mechanical properties. Here, we present an ultraviolet (UV)-assisted 3D printing of thermally cured epoxy composites with high tensile toughness via a two-stage curing approach. The ink containing UV curable resin and epoxy oligomer is used for UV-assisted direct-ink write (DIW)-based 3D printing followed by thermal curing of the part containing the epoxy oligomer. The UV curable resin forms a network by photo polymerization after the 1st stage of UV curing, which can maintain the printed architecture at an elevated temperature. The 2nd stage thermal curing of the epoxy oligomer yields an interpenetrating polymer network (IPN) composite with highly enhanced mechanical properties. It is found that the printed IPN epoxy composites enabled by the two-stage curing show isotropic mechanical properties and high tensile toughness. We demonstrated that the 3D-printed high-toughness epoxy composites show good shape memory properties. This UV-assisted DIW 3D printing via a two-stage curing method can broaden the application of 3D printing to fabricate thermoset materials with enhanced tensile toughness and tunable properties for high-performance and functional applications.
A catalyst‐free malleable network polymer that can be reprocessed by application of either water or heat is prepared through imine chemistry. This material is recycled from a fine powder to a ...coherent solid with >100% recycling efficiency through several generations. It is also reprocessed at ambient temperature using only water, thus potentially leading to energy‐neutral green processing of the material.
Objectives
To investigate the mental status of pregnant women and to determine their obstetric decisions during the COVID‐19 outbreak.
Design
Cross‐sectional study.
Setting
Two cities in China––Wuhan ...(epicentre) and Chongqing (a less affected city).
Population
A total of 1947 pregnant women.
Methods
We collected demographic, pregnancy and epidemic information from our pregnant subjects, along with their attitudes towards COVID‐19 (using a self‐constructed five‐point scale). The Self‐Rating Anxiety Scale (SAS) was used to assess anxiety status. Obstetric decision‐making was also evaluated. The differences between cities in all of the above factors were compared and the factors that influenced anxiety levels were identified by multivariable analysis.
Main outcome measures
Anxiety status and its influencing factors. Obstetric decision‐making.
Results
Differences were observed between cities in some background characteristics and women's attitudes towards COVID‐19 in Wuhan were more extreme. More women in Wuhan felt anxious (24.5 versus 10.4%). Factors that influenced anxiety also included household income, subjective symptom and attitudes. Overall, obstetric decisions also revealed city‐based differences; these decisions mainly concerned hospital preference, time of prenatal care or delivery, mode of delivery and infant feeding.
Conclusions
The outbreak aggravated prenatal anxiety and the associated factors could be targets for psychological care. In parallel, key obstetric decision‐making changed, emphasising the need for pertinent professional advice. Special support is essential for pregnant mothers during epidemics.
Tweetable
The COVID‐19 outbreak increased pregnant women's anxiety and affected their decision‐making.
Tweetable
The COVID‐19 outbreak increased pregnant women's anxiety and affected their decision‐making.
This article includes Author Insights, a video available at https://vimeo.com/rcog/authorinsights16381
Multimaterial additive manufacturing has important applications in various emerging fields. However, it is very challenging due to material and printing technology limitations. Here, we present a ...resin design strategy that can be used for single-vat single-cure grayscale digital light processing (g-DLP) 3D printing where light intensity can locally control the conversion of monomers to form from a highly stretchable soft organogel to a stiff thermoset within in a single layer of printing. The high modulus contrast and high stretchability can be realized simultaneously in a monolithic structure at a high printing speed (z-direction height 1 mm/min). We further demonstrate that the capability can enable previously unachievable or hard-to-achieve 3D printed structures for biomimetic designs, inflatable soft robots and actuators, and soft stretchable electronics. This resin design strategy thus provides a material solution in multimaterial additive manufacture for a variety of emerging applications.
Digital light processing (DLP) three-dimensional (3D) printing technology has advantages of fast printing speed and high printing precision. It can print objects with small and complex geometrical ...features and has been widely used in jewelry manufacturing and dentistry. In DLP printing, it is common to use post-treatment with UV light irradiation to improve the final mechanical properties. However, it was found that the UV post-curing process can lead to shape distortion and thus reduction of dimension accuracy. In this paper, we combined photopolymerization reaction kinetics and Euler-Bernoulli beam theory to study UV post-curing induced shape distortion of thin structures prepared by DLP 3D printing. Experiments were conducted to characterize the evolution of mechanical behavior of printed samples during the post-printing process, which was correlated to printing parameters (printing time of single-layer, height of single-layer and printing UV intensity), post-curing UV light intensity and the thickness of the strip. Moreover, post-curing induced distortion was used for the fabrication of 3D structures.
Theoretical modeling and experiments were implemented to study the UV post-curing induced shape distortion of thin structures prepared by DLP 3D printing.