Systemic lupus erythematosus (SLE) is a complex autoimmune disease, in which immune defects can occur at multiple points of the cascading auto‐aggressive immune reactions, resulting in a striking ...heterogeneity of clinical presentations. The clinical manifestations of such autoimmune response can be severe: common manifestations symptoms include rash and renal inflammation progressing to kidney failure. Autophagy, the cellular “self‐digestion” process, is a key factor in the interplay between innate and adaptive immunity. Dysregulation of autophagy has been implicated in numerous autoimmune diseases. Several lines of evidence from genomic studies, cell culture systems, animal models, and human patients are emerging to support the role of autophagy in progression and pathogenesis of SLE. In this review, we summarize recent key findings on the aberrations of autophagy in SLE, with a special focus on how deregulated autophagy promotes autoimmunity and renal damage. We will also discuss how the observed findings may be translated into therapeutic settings.
Genetic and environmental factors can promote the pathogenesis and/or development of SLE. Normal levels of autophagy contribute to the maintenance of the immune homeostasis, whereas up‐ or downregulated autophagy contributes to the loss of tolerance leading to autoantibodies production. We here review how immune cell autophagy is deregulated in lupus.
Blockade of the protein–protein interaction between the transmembrane protein programmed cell death protein 1 (PD‐1) and its ligand PD‐L1 has emerged as a promising immunotherapy for treating ...cancers. Using the technology of mirror‐image phage display, we developed the first hydrolysis‐resistant D‐peptide antagonists to target the PD‐1/PD‐L1 pathway. The optimized compound DPPA‐1 could bind PD‐L1 at an affinity of 0.51 μM in vitro. A blockade assay at the cellular level and tumor‐bearing mice experiments indicated that DPPA‐1 could also effectively disrupt the PD‐1/PD‐L1 interaction in vivo. Thus D‐peptide antagonists may provide novel low‐molecular‐weight drug candidates for cancer immunotherapy.
Protein chemical synthesis and mirror‐image phage display were combined to develop a proteolysis‐resistant D‐peptide antagonist (DPPA‐1) which targets the immune checkpoint protein PD‐L1 (the ligand for PD‐1, the programmed cell death protein 1). DPPA‐1 was found to inhibit the PD‐1/PD‐L1 protein–protein interaction at the cellular level. IgV=immunoglobulin‐like variable.
A low-cost and green biorefinery will increase the economy and revenue from lignocellulosic biomass. Herein, a biomass-derived deep eutectic solvent (DES) pretreatment was developed to deconstruct ...the recalcitrant structure of Eucalyptus for further cellulose enzymatic hydrolysis and lignin valorization. The DES consisted of biomass-derived chemicals (lactic acid and choline chloride). The results showed that DES pretreatment resulted in notable removal of hemicelluloses and lignin, and drastically reduced “biomass recalcitrance”. Under the optimum conditions (DES ratio: 10 : 1, temperature: 110 °C, time: 6 h), the glucose yield by enzymatic hydrolysis reached 94.3%, which was significantly enhanced 9.8 times compared to that of the original biomass without DES pretreatment. The state-of-the-art analysis indicated that the regenerated lignin exhibited well-preserved structures ( i.e. , β- O -4, β–β linkages) without contaminated carbohydrates, and it had a relatively low and homogeneous molecular weight. All these structural characteristics suggested that lignin has great potential application in its conversion into bio-based chemicals and materials. Besides, it is urgent to develop low-cost recycled DESs as green solvents for sustainable biomass pretreatment. The lifetime and recyclability experiment of the DES solution showed that the recovery yield of the DES was at least 90% and the fundamental structural properties of the recycled DES were almost unchanged throughout the recycling cycles. More importantly, the pretreatment efficiency (delignification and enzymatic saccharification) was still largely maintained after the recycling process. Overall, this work demonstrated that biomass pretreatment with the recycled DES was promising for a low-cost biorefinery to achieve an efficient fractionation of lignocellulosic biomass into fermentable glucose and high-quality lignin with tailored chemical structures.
This paper presents a novel method to estimate the number of shorted turns in a permanent magnet synchronous machine (PMSM) following the detection of interturn short-circuit (ITSC) fault and its ...location. In this proposed method, PMSM is excited through a low sinusoidal voltage at standstill condition to obtain the winding resistance and synchronous inductance by current response. It is shown that the ITSC fault introduces variation in the current response, which can be used to calculate the number of shorted turns under zero fault resistance assumption. Using this practical procedure, the fault severity can be estimated directly in a straight-forward manner. In other words, the severity estimation for a given machine can be done without complex machine modeling or experiments on ITSC prototype with multiple taps. The findings in this paper are essential for a comprehensive solution including fault mitigation algorithms and postfault operations. In order to verify the findings, a three-phase equivalent circuit model supported by finite element analysis results is used to take saturation and space harmonics into account. In addition, experimental results are presented to demonstrate the validity and practicability of the severity estimation.
Lithium–sulfur (Li–S) batteries are highly regarded as the next‐generation energy‐storage devices because of their ultrahigh theoretical energy density of 2600 Wh kg−1. Sulfurized polyacrylonitrile ...(SPAN) is considered a promising sulfur cathode to substitute carbon/sulfur (C/S) composites to afford higher Coulombic efficiency, improved cycling stability, and potential high‐energy‐density Li–SPAN batteries. However, the instability of the Li‐metal anode threatens the performances of Li–SPAN batteries bringing limited lifespan and safety hazards. Li‐metal can react with most kinds of electrolyte to generate a protective solid electrolyte interphase (SEI), electrolyte regulation is a widely accepted strategy to protect Li‐metal anodes in rechargeable batteries. Herein, the basic principles and current challenges of Li–SPAN batteries are addressed. Recent advances on electrolyte regulation towards stable Li‐metal anodes in Li–SPAN batteries are summarized to suggest design strategies of solvents, lithium salts, additives, and gel electrolyte. Finally, prospects for future electrolyte design and Li anode protection in Li–SPAN batteries are discussed.
Increased attention SPAN: Recent advances in electrolyte regulation towards stable lithium‐metal anodes for Li‐sulfurized polyacrylonitrile (SPAN) batteries are summarized to afford design strategies of solvents, lithium salts, additives, and gel electrolyte.
Abstract
The recently discovered non-Hermitian skin effect (NHSE) manifests the breakdown of current classification of topological phases in energy-nonconservative systems, and necessitates the ...introduction of non-Hermitian band topology. So far, all NHSE observations are based on one type of non-Hermitian band topology, in which the complex energy spectrum winds along a closed loop. As recently characterized along a synthetic dimension on a photonic platform, non-Hermitian band topology can exhibit almost arbitrary windings in momentum space, but their actual phenomena in real physical systems remain unclear. Here, we report the experimental realization of NHSE in a one-dimensional (1D) non-reciprocal acoustic crystal. With direct acoustic measurement, we demonstrate that a twisted winding, whose topology consists of two oppositely oriented loops in contact rather than a single loop, will dramatically change the NHSE, following previous predictions of unique features such as the bipolar localization and the Bloch point for a Bloch-wave-like extended state. This work reveals previously unnoticed features of NHSE, and provides the observation of physical phenomena originating from complex non-Hermitian winding topology.
NOx− reduction acts a pivotal part in sustaining globally balanced nitrogen cycle and restoring ecological environment, ammonia (NH3) is an excellent energy carrier and the most valuable product ...among all the products of NOx− reduction reaction, the selectivity of which is far from satisfaction due to the intrinsic complexity of multiple‐electron NOx−‐to‐NH3 process. Here, we utilize the Schottky barrier‐induced surface electric field, by the construction of high density of electron‐deficient Ni nanoparticles inside nitrogen‐rich carbons, to facilitate the enrichment and fixation of all NOx− anions on the electrode surface, including NO3− and NO2−, and thus ensure the final selectivity to NH3. Both theoretical and experimental results demonstrate that NOx− anions were continuously captured by the electrode with largely enhanced surface electric field, providing excellent Faradaic efficiency of 99 % from both electrocatalytic NO3− and NO2− reduction. Remarkably, the NH3 yield rate could reach the maximum of 25.1 mg h−1 cm−2 in electrocatalytic NO2− reduction reaction, outperforming the maximum in the literature by a factor of 6.3 in neutral solution. With the universality of our electrocatalyst, all sorts of available electrolytes containing NOx− pollutants, including seawater or wastewater, could be directly used for ammonia production in potential through sustainable electrochemical technology.
The tunable surface electric field induced by Schottky barrier boosts the reduction of NOx− in water for ammonia production. The tunable amounts of Ni nanoparticles inside a nitrogen‐rich carbon support could gradually enhance the surface electric field for enriching and fixation of NOx− anions, achieving a high Faradaic efficiency of 99 % for ammonia production from both electrocatalytic NO3− and NO2− reduction.
Lignin is the most abundant natural aromatic feedstock, and the conversion of lignin to value-added chemicals has drawn immense attention in biorefineries. Deep eutectic solvents (DESs) have been ...used for lignocellulosic biomass fractionation and lignin extraction due to their simple procedure, selective solubility of lignin, low cost, and high recyclability. The nature and number of functional groups in DESs remarkably influence the delignification and structural changes of lignin during treatment. Although many studies have investigated lignin extraction and the following chemical transformations during DES treatment, no review has illuminated the structure-function relationships between DESs and lignin. This review presents a systematic overview of important studies to provide insights into lignin extraction and chemical transformations by examining the relationship between the type and number of functional groups in DES constituents during pretreatment. Furthermore, various challenges and opportunities in the development of more sustainable and efficient lignin extraction are provided according to the remaining problems in this field.
The effect of the structure and properties of DESs on lignin extraction and chemical transformations.
Berry phase associated with energy bands in crystals can lead to quantised observables like quantised dipole polarizations in one-dimensional topological insulators. Recent theories have generalised ...the concept of quantised dipoles to multipoles, resulting in the discovery of multipole topological insulators which exhibit a hierarchy of multipole topology: a quantised octupole moment in a three-dimensional bulk induces quantised quadrupole moments on its two-dimensional surfaces, which in turn induce quantised dipole moments on one-dimensional hinges. Here, we report on the realisation of an octupole topological insulator in a three-dimensional acoustic metamaterial. We observe zero-dimensional topological corner states, one-dimensional gapped hinge states, two-dimensional gapped surface states, and three-dimensional gapped bulk states, representing the hierarchy of octupole, quadrupole and dipole moments. Conditions for forming a nontrivial octupole moment are demonstrated by comparisons with two different lattice configurations having trivial octupole moments. Our work establishes the multipole topology and its full hierarchy in three-dimensional geometries.
PDF
