Summary
Calories from any food have the potential to increase risk for obesity and cardiometabolic disease because all calories can directly contribute to positive energy balance and fat gain. ...However, various dietary components or patterns may promote obesity and cardiometabolic disease by additional mechanisms that are not mediated solely by caloric content. Researchers explored this topic at the 2017 CrossFit Foundation Academic Conference ‘Diet and Cardiometabolic Health – Beyond Calories’, and this paper summarizes the presentations and follow‐up discussions. Regarding the health effects of dietary fat, sugar and non‐nutritive sweeteners, it is concluded that food‐specific saturated fatty acids and sugar‐sweetened beverages promote cardiometabolic diseases by mechanisms that are additional to their contribution of calories to positive energy balance and that aspartame does not promote weight gain. The challenges involved in conducting and interpreting clinical nutritional research, which preclude more extensive conclusions, are detailed. Emerging research is presented exploring the possibility that responses to certain dietary components/patterns are influenced by the metabolic status, developmental period or genotype of the individual; by the responsiveness of brain regions associated with reward to food cues; or by the microbiome. More research regarding these potential ‘beyond calories’ mechanisms may lead to new strategies for attenuating the obesity crisis.
We use an ensemble of surface (EPA CSN, IMPROVE, SEARCH, AERONET), aircraft (SEAC4RS), and satellite (MODIS, MISR) observations over the southeast US during the summer-fall of 2013 to better ...understand aerosol sources in the region and the relationship between surface particulate matter (PM) and aerosol optical depth (AOD). The GEOS-Chem global chemical transport model (CTM) with 25 25 km2 resolution over North America is used as a common platform to interpret measurements of different aerosol variables made at different times and locations. Sulfate and organic aerosol (OA) are the main contributors to surface PM2.5 (mass concentration of PM finer than 2.5 mu m aerodynamic diameter) and AOD over the southeast US. OA is simulated successfully with a simple parameterization, assuming irreversible uptake of low-volatility products of hydrocarbon oxidation. Biogenic isoprene and monoterpenes account for 60 % of OA, anthropogenic sources for 30 %, and open fires for 10 %. 60 % of total aerosol mass is in the mixed layer below 1.5 km, 25 % in the cloud convective layer at 1.5-3 km, and 15 % in the free troposphere above 3 km. This vertical profile is well captured by GEOS-Chem, arguing against a high-altitude source of OA. The extent of sulfate neutralization (f = NH4+/(2SO42- + NO3-) is only 0.5-0.7 mol mol-1 in the observations, despite an excess of ammonia present, which could reflect suppression of ammonia uptake by OA. This would explain the long-term decline of ammonium aerosol in the southeast US, paralleling that of sulfate. The vertical profile of aerosol extinction over the southeast US follows closely that of aerosol mass. GEOS-Chem reproduces observed total column aerosol mass over the southeast US within 6 %, column aerosol extinction within 16 %, and space-based AOD within 8-28 % (consistently biased low). The large AOD decline observed from summer to winter is driven by sharp declines in both sulfate and OA from August to October. These declines are due to shutdowns in both biogenic emissions and UV-driven photochemistry. Surface PM2.5 shows far less summer-to-winter decrease than AOD and we attribute this in part to the offsetting effect of weaker boundary layer ventilation. The SEAC4RS aircraft data demonstrate that AODs measured from space are consistent with surface PM2.5. This implies that satellites can be used reliably to infer surface PM2.5 over monthly timescales if a good CTM representation of the aerosol vertical profile is available.
Black carbon aerosol plays a unique and important role in Earth's climate system. Black carbon is a type of carbonaceous material with a unique combination of physical properties. This assessment ...provides an evaluation of black‐carbon climate forcing that is comprehensive in its inclusion of all known and relevant processes and that is quantitative in providing best estimates and uncertainties of the main forcing terms: direct solar absorption; influence on liquid, mixed phase, and ice clouds; and deposition on snow and ice. These effects are calculated with climate models, but when possible, they are evaluated with both microphysical measurements and field observations. Predominant sources are combustion related, namely, fossil fuels for transportation, solid fuels for industrial and residential uses, and open burning of biomass. Total global emissions of black carbon using bottom‐up inventory methods are 7500 Gg yr−1 in the year 2000 with an uncertainty range of 2000 to 29000. However, global atmospheric absorption attributable to black carbon is too low in many models and should be increased by a factor of almost 3. After this scaling, the best estimate for the industrial‐era (1750 to 2005) direct radiative forcing of atmospheric black carbon is +0.71 W m−2 with 90% uncertainty bounds of (+0.08, +1.27) W m−2. Total direct forcing by all black carbon sources, without subtracting the preindustrial background, is estimated as +0.88 (+0.17, +1.48) W m−2. Direct radiative forcing alone does not capture important rapid adjustment mechanisms. A framework is described and used for quantifying climate forcings, including rapid adjustments. The best estimate of industrial‐era climate forcing of black carbon through all forcing mechanisms, including clouds and cryosphere forcing, is +1.1 W m−2 with 90% uncertainty bounds of +0.17 to +2.1 W m−2. Thus, there is a very high probability that black carbon emissions, independent of co‐emitted species, have a positive forcing and warm the climate. We estimate that black carbon, with a total climate forcing of +1.1 W m−2, is the second most important human emission in terms of its climate forcing in the present‐day atmosphere; only carbon dioxide is estimated to have a greater forcing. Sources that emit black carbon also emit other short‐lived species that may either cool or warm climate. Climate forcings from co‐emitted species are estimated and used in the framework described herein. When the principal effects of short‐lived co‐emissions, including cooling agents such as sulfur dioxide, are included in net forcing, energy‐related sources (fossil fuel and biofuel) have an industrial‐era climate forcing of +0.22 (−0.50 to +1.08) W m−2 during the first year after emission. For a few of these sources, such as diesel engines and possibly residential biofuels, warming is strong enough that eliminating all short‐lived emissions from these sources would reduce net climate forcing (i.e., produce cooling). When open burning emissions, which emit high levels of organic matter, are included in the total, the best estimate of net industrial‐era climate forcing by all short‐lived species from black‐carbon‐rich sources becomes slightly negative (−0.06 W m−2 with 90% uncertainty bounds of −1.45 to +1.29 W m−2). The uncertainties in net climate forcing from black‐carbon‐rich sources are substantial, largely due to lack of knowledge about cloud interactions with both black carbon and co‐emitted organic carbon. In prioritizing potential black‐carbon mitigation actions, non‐science factors, such as technical feasibility, costs, policy design, and implementation feasibility play important roles. The major sources of black carbon are presently in different stages with regard to the feasibility for near‐term mitigation. This assessment, by evaluating the large number and complexity of the associated physical and radiative processes in black‐carbon climate forcing, sets a baseline from which to improve future climate forcing estimates.
The results of short-term studies in humans suggest that, compared with glucose, acute consumption of fructose leads to increased postprandial energy expenditure and carbohydrate oxidation and ...decreased postprandial fat oxidation. The objective of this study was to determine the potential effects of increased fructose consumption compared with isocaloric glucose consumption on substrate utilization and energy expenditure following sustained consumption and under energy-balanced conditions.
As part of a parallel arm study, overweight/obese male and female subjects, 40-72 years, consumed glucose- or fructose-sweetened beverages providing 25% of energy requirements for 10 weeks. Energy expenditure and substrate utilization were assessed using indirect calorimetry at baseline and during the 10th week of intervention.
Consumption of fructose, but not glucose, led to significant decreases of net postprandial fat oxidation and significant increases of net postprandial carbohydrate oxidation (P<0.0001 for both). Resting energy expenditure (REE) decreased significantly from baseline values in subjects consuming fructose (P=0.031) but not in those consuming glucose.
Increased consumption of fructose for 10 weeks leads to marked changes of postprandial substrate utilization including a significant reduction of net fat oxidation. In addition, we report that REE is reduced compared with baseline values in subjects consuming fructose-sweetened beverages for 10 weeks.
Chemical components of organic aerosol (OA) selectively absorb light at short wavelengths. In this study, the prevalence, sources, and optical importance of this so-called brown carbon (BrC) aerosol ...component are investigated throughout the North American continental tropospheric column during a summer of extensive biomass burning. Spectrophotometric absorption measurements on extracts of bulk aerosol samples collected from an aircraft over the central USA were analyzed to directly quantify BrC abundance. BrC was found to be prevalent throughout the 1 to 12 km altitude measurement range, with dramatic enhancements in biomass-burning plumes. BrC to black carbon (BC) ratios, under background tropospheric conditions, increased with altitude, consistent with a corresponding increase in the absorption Aangstrom exponent (AAE) determined from a three-wavelength particle soot absorption photometer (PSAP). The sum of inferred BC absorption and measured BrC absorption at 365 nm was within 3 % of the measured PSAP absorption for background conditions and 22 % for biomass burning. A radiative transfer model showed that BrC absorption reduced top-of-atmosphere (TOA) aerosol forcing by ~ 20 % in the background troposphere. Extensive radiative model simulations applying this study background tropospheric conditions provided a look-up chart for determining radiative forcing efficiencies of BrC as a function of a surface-measured BrC : BC ratio and single scattering albedo (SSA). The chart is a first attempt to provide a tool for better assessment of brown carbon's forcing effect when one is limited to only surface data. These results indicate that BrC is an important contributor to direct aerosol radiative forcing.
A single-particle soot photometer (SP2) was flown on a NASA WB-57F high-altitude research aircraft in November 2004 from Houston, Texas. The SP2 uses laser-induced incandescence to detect individual ...black carbon (BC) particles in an air sample in the mass range of approx.3-300 fg (approx.0.15-0.7 microns volume equivalent diameter). Scattered light is used to size the remaining non-BC aerosols in the range of approx.0.17-0.7 microns diameter. We present profiles of both aerosol types from the boundary layer to the lower stratosphere from two midlatitude flights. Results for total aerosol amounts in the size range detected by the SP2 are in good agreement with typical particle spectrometer measurements in the same region. All ambient incandescing particles were identified as BC because their incandescence properties matched those of laboratory-generated BC aerosol. Approximately 40% of these BC particles showed evidence of internal mixing (e.g., coating). Throughout profiles between 5 and 18.7 km, BC particles were less than a few percent of total aerosol number, and black carbon aerosol (BCA) mass mixing ratio showed a constant gradient with altitude above 5 km. SP2 data was compared to results from the ECHAM4/MADE and LmDzT-INCA global aerosol models. The comparison will help resolve the important systematic differences in model aerosol processes that determine BCA loadings. Further intercomparisons of models and measurements as presented here will improve the accuracy of the radiative forcing contribution from BCA.
In situ measurements of the mass, mixing state, and optical size of individual black‐carbon (BC) particles in the fine mode (90–600 nm) have been made in fresh emissions from urban and biomass ...burning sources with an airborne single‐particle soot photometer. Contrasts between the two sources are significant and consistent. Urban BC tends to smaller sizes, fewer coated particles, thinner coatings, and less absorption per unit mass than biomass‐burning BC. This suggests that urban BC may have a longer lifetime in the atmosphere and a different impact on BC radiative forcing in the first indirect effect than biomass‐burning BC. These measurements bound the likely variability in the microphysical state of BC emissions from typical continental processes, and provide direct measurements of the size distribution and coating state of fine‐mode BC for use in constraining climate and aerosol models. These results highlight the need for the integration of source‐specific information into such models.
Black carbon (BC) is the dominant aerosol absorber of solar radiation in the atmosphere and is an important component of anthropogenic climate forcing. BC's role is strongly dependent on its physical ...state, which can influence the way that BC particles may act as ice and cloud nuclei, as well as the way they interact with solar radiation. In situ measurements made with a single‐particle soot photometer flown on a NASA high‐altitude research aircraft show the mass and size of individual BC particles in the tropics, as well as their propensity to be found mixed with additional materials. Mie theory was used to connect observed light scattering off BC particles to the optical effects of coatings on the particles. The observations indicate that as BC from ground‐based emission sources rises in altitude to the lower stratosphere, coatings on BC particles become both thicker and more prevalent, while BC mass mixing ratios decrease dramatically from their values near the ground. Coatings enhance light absorption by the ambient BC column by at least 30%. These results reveal the microphysical state of BC in the atmosphere while providing important constraints for models evaluating BC's role in climate change.
Evaluation of the aerosol schemes in current climate models is dependent upon the available observational data. In-situ observations from flight campaigns can provide valuable data about the vertical ...distribution of aerosol that is difficult to obtain from satellite or ground-based platforms, although they are localised in space and time. Using single-particle soot-photometer (SP2) measurements from the HIAPER Pole-to-Pole Observations (HIPPO) campaign, which consists of many vertical profiles over a large region of the Pacific, we evaluate the meridional and vertical distribution of black carbon (BC) aerosol simulated by the HadGEM3-UKCA and ECHAM5-HAM2 models. Both models show a similar pattern of overestimating the BC column burden compared to that derived from the observations, in many areas by an order of magnitude. However, by sampling the simulated BC mass mixing ratio along the flight track and comparing to the observations, we show that this discrepancy has a rather different vertical structure in the two models: in HadGEM3-UKCA the discrepancy is dominated by excess aerosol in the tropical upper troposphere, while in ECHAM5-HAM2 areas of discrepancy are spread across many different latitudes and altitudes. Using this methodology, we conduct sensitivity tests on two specific elements of the models: biomass-burning emissions and scavenging by convective precipitation. We show that, by coupling the convective scavenging more tightly with convective transport, both the column burden and vertical distribution of BC in HadGEM3-UKCA are much improved with respect to the observations, with a substantial and statistically significant increase in correlation - this demonstrates the importance of a realistic representation of this process. In contrast, updating from GFED2 to GFED3.1 biomass-burning emissions makes a more modest improvement in both models, which is not statistically significant. By comparing our results with a more traditional approach using regional- and monthly-mean vertical profile curves, we show that the point-by-point analysis allows the model improvements to be demonstrated more clearly. We also demonstrate the important role that nudged simulations (where the large-scale model dynamics are continuously relaxed towards a reanalysis) can play in this type of evaluation, allowing statistically significant differences between configurations of the aerosol scheme to be seen where the differences between the corresponding free-running simulations would not be significant.
Refractory black carbon (rBC) aerosol loadings and mass size distributions have been quantified during the HIPPO campaign above the remote Pacific from 80N to 67S. Over 100 vertical profiles of rBC ...loadings, extending from ∼0.3 to ∼14 km were obtained with a Single‐Particle Soot Photometer (SP2) during a two‐week period in January 2009. The dataset provides a striking, and previously unobtainable, pole‐to‐pole snapshot of rBC mass loadings. rBC vertical concentration profiles reveal significant dependences on latitude, while associated rBC mass size distributions were highly uniform. The vertical profiles averaged in five latitude zones were compared to an ensemble of AEROCOM model fields. The model ensemble spread in each zone was over an order of magnitude, while the model average over‐predicted rBC concentrations overall by a factor five. The comparisons suggest that rBC removal in global models may need to be evaluated separately in different latitude regions and perhaps enhanced.
PDF
