Objectives
To investigate the relationship between sleep disorders, morning hyposalivation, and subjective feeling of dry mouth.
Materials and methods
A cross-sectional, observational, clinical study ...was carried out in a homogenous population sample which consists of Greek male soldiers without any medical history. After the application of oral modified Schirmer test, the sample was divided into a study group (
n
= 63) (MST < 25 mm/3 min) and a control group (
n
= 110) (MST ≥ 25 mm/3 min). In order to assess daytime sleepiness, risk of obstructive sleep apnea (OSA), sleep quality, sleep bruxism (SB), and subjective feeling of dry mouth, all the participants filled in the following scales in Greek version: Epworth Sleepiness Scale (ESS), Pittsburgh Sleep Quality Index (PSQI), Berlin Questionnaire (BQ), a SB questionnaire, and Xerostomia Inventory (XI) respectively. In every subgroup that came of ESS, PSQI, BQ, and SB questionnaire scoring, subjective feeling of dry mouth was evaluated, based on XI values.
Results
Statistically significant difference (
p
< 0.001) through PSQI scores was found between the study and control group. In contrast, a statistically significant difference was not obtained for the scores of ESS (
p
= 0.293), BQ (
p
= 0.089), and SB questionnaire (
p
= 0.730). XI scores introduced statistically significant difference between the subgroups of PSQI (
p
< 0.001), BQ (
p
= 0.001), SB questionnaire (
p
= 0.004) and statistically weak between the subgroups of ESS (p = 0.049).
Conclusions
This is the first research study so far suggesting that patients with morning hyposalivation exhibit poor sleep quality using an objective method. The present results have, also, shown that subjective feeling of dry mouth is related to excessive daytime sleepiness, poor sleep quality, high risk of obstructive sleep apnea, and sleep bruxism, but larger-scale studies are still needed.
Clinical Relevance
These findings should keep dentists aware of a possible association between xerostomia and sleep disorders and support larger-scale studies.
Hydrophilicity of dental impression materials is crucial for obtaining an accurate impression and necessary for the production of a well-fitting cast restoration. The most common technique for ...evaluation of hydrophilicity is a contact angle measurement. The aim of the present
study was to compare the water contact angles of four groups of elastomeric impression materials, before and during setting.
Flattened specimens (n=10) of tested impression materials were prepared by the use of a Teflon mold with specific dimensions. A 5μl droplet of deionized water fell on the specimen, and photos were taken using a Nikon D3200 DSLR camera and a 105 mm macro lens (Nikorr, Nikon) in specific time points.
The CAD/CAM material showed the highest contact angle measurements. The light body polyvinylsiloxane (PVS) material 1, polyether and vinylsiloxanether material showed comparable contact angle measurements especially at the initial time point. A statistically significant reduction of contact angles was reported during setup time for all PVS, PE and vinylsiloxanether materials, while the most expressed reduction of contact angle measurements, and thus the most significant increase of hydrophilicity were reported for light wash PVS material 2.
The CAD/CAM impression material showed the most hydrophobic behavior. PVS materials showed excellent hydrophilicity. Polyether and polyvinyloxanether impression materials presented lower contact angle measurements, and thus superior hydrophilicity, compared with other tested materials initially and during setting. All tested impression materials presented a stepwise development of hydrophilicity during the setting stage.
Objective
The objective of this study was to investigate the effectiveness of testing for active matrix metalloproteinase‐8 (aMMP‐8) by a quantitative point‐of‐care (PoC), chairside lateral flow ...immunotest and azurocidin, in the peri‐implant sulcular fluid (PISF), as biomarkers for the presence or absence of peri‐implant diseases.
Background
Current research indicates that proinflammatory cytokines and extracellular matrix‐degrading enzymes may be of value to diagnose and predict peri‐implant disease initiation and progression, but more data are needed.
Methods
Eighty patients with implants were recruited. PISF samples were collected and quantitatively analyzed for aMMP‐8 (chairside) and azurocidin with ELISA. Radiographic assessments and clinical indices (probing depth, probing attachment level, bleeding on probing, and plaque) were recorded after sampling. Kruskal‐Wallis test and pairwise post hoc Dunn‐Bonferroni test were used to relate aMMP‐8 levels and azurocidin levels to clinical parameters. The diagnostic ability of aMMP‐8 (ng/mL) and azurocidin was analyzed by receiver operator curve analysis. Area under the curve (AUC) was calculated and the Spearman's rho, and the coefficient of determination (R2) were used to calculate the correlations between aMMP‐8, azurocidin, and periodontal parameters.
Results
Statistically significant differences were observed for aMMP‐8 levels but not for azurocidin between healthy implants, implants with mucositis, and those with peri‐implantitis (13.65 ± 7.18, 32.33 ± 21.20, and 73.07 ± 43.93 ng/mL, respectively), (Kruskall–Wallis test p < .05). The aMMP‐8 test with a threshold of 20 ng/mL has a sensitivity of 71.7% and a specificity of 77.8% to identify peri‐implantitis and healthy implants, respectively. AUC was found to be 0.814, and the accuracy of the method reaches 73.8%. Above a cutoff value of 33.7 ng/mL of aMMP‐8, the accuracy of the test to detect peri‐implantitis reaches 77.5% in relation to 62.5% of BoP from the same site.
Conclusion
Taken collectively, present data indicate that the aMMP‐8 PoC lateral flow immunotest can be a beneficial, adjunctive diagnostic quantitative tool for real‐time screening for peri‐implant diseases.
The purpose of this study was to investigate the fracture strength of endodontically treated human maxillary premolars (ETP) restored with posts and metal ceramic (MC) or monolithic zirconia (MZ) ...crowns. Sixty ETP were randomly divided into 3 groups. Teeth in control group (C) received a resin filling. ETP in the MC group were restored with prefabricated metal posts, composite cores and MC crowns while in the MZ group with glass-fiber posts, composite cores and MZ crowns. Half of the specimens were loaded at a 135° angle and half under axial loading until fracture. The fracture modes were divided in repairable and irreparable using optical microscopy. Mean fracture strength was significantly higher for MC than for MZ crowns and control group only under axial loading. The distribution of repairable and irreparable failures presented no significant differences. Crown placement significantly improved the fracture strength of ETP irrespectively of post and crown type.
Background: Regenerative medicine in dentistry involves tissue engineering applications suitable for the unique oral environment. In this regard, advances in computer-aided technology have ...facilitated the creation of 3D scaffolds using cone beam computed tomography (CBCT). This review aimed to investigate whether 3D-printed scaffolds can be effectively used to achieve ridge preservation and/or predictable vertical and horizontal bone augmentation, ensuring successful outcomes for dental implant placement. Methods: A comprehensive search was conducted across six electronic databases (PubMed, Scopus, ScienceDirect, Google Scholar, Web of Science, Ovid) to identify relevant studies according to specific eligibility criteria, following the PRISMA guidelines. Two independent reviewers screened and selected studies, performed data extraction, and assessed the risk of bias using the Cochrane tool for randomized clinical trials and the Newcastle–Ottawa Scale for non-randomized clinical trials. Results: The initial search yielded 419 articles, which were subsequently screened to remove duplicates. After evaluating 293 articles based on title and abstract, 10 studies remained for full-text assessment. Ultimately, only three studies met all the pre-established eligibility criteria. Conclusions: The studies included in this systematic review showed that the use of multidimensional customized scaffolds appears to promote dental implant placement. Nevertheless, despite the positive reported effects, further well-designed randomized clinical trials are necessary to determine the special characteristics of the optimal 3D-customized scaffold.
Abstract This paper details a novel method to improve wear resistance of dental glass ionomer cement (GIC)restorations. The purpose of this in vitro study was to evaluate the effect of a calcium ...chloride (CaCl2) solution treatment on surface hardness, surface roughness, compressive strength, water sorption and solubility of three conventional glass ionomer cements (GICs). Additionally, the changes of the Ca composition and morphology of the surface of the tested GICs were also investigated. The experimental groups of the study were: Group 1 (control) specimens after mixing were left in the mold to set without any treatment for 5 min; Group 2 specimens were left in the mold to set for 5 min and then each specimen was immersed in 10 ml of 42.7 wt% CaCl2 solution for 60 s. Statistical analysis was performed using one-way ANOVA and Tukey post hoc tests (a=0.05). Calcium chloride solution treatment increased surface hardness of the GICs compared to control groups (P<0.05), while surface roughness and compressive strength did not change after the treatment (P>0.05). Reduction in water sorption and solubility was detected but not in all CaCl2 solution-treatment groups. No alterations were observed in surface morphology of the GICs, while surface calcium composition was increased after the treatment (P<0.05). The use of a CaCl2 solution immediately after initial setting of GICs may be advantageous for some properties of the materials and possibly leads to improved prognosis and wear resistance of their restorations.
Background/Aim: To investigate the electromyographic (EMG) activity changes of jaw-closing muscles in patients with different occlusion schemes and posterior edentulous span, after the placement of ...teeth-supported fixed partial denture (FPD).
Statement of problem It is unclear whether subjects who report tooth clenching and/or grinding have more noticeable clinical signs of dental attrition, abfractions, and occlusal pits on their natural ...teeth than subjects who do not report bruxism activity. Purpose The purpose of this study was to determine whether there was an association between self-reported (or not reported) bruxism activity and occurrence of dental attrition (anterior, posterior), abfractions, and occlusal pits on natural teeth. Material and methods One hundred and two volunteer adult Greek subjects (mean age 44.6 ±5.7 years) were classified into 2 groups (50 self-reported bruxers and 52 nonbruxers) according to 2 inquires regarding grinding and/or clenching of their teeth. Dental attrition (anterior, posterior) was assessed by 2 calibrated experienced examiners on diagnostic casts on a tooth-by-tooth basis, using a previously well established ordinal scale. Abfraction lesions (V-shaped, in the cervical region) and occlusal pits were recorded if these clinical signs were found on at least 2 natural teeth. Statistical comparisons between the 2 groups relative to the distribution of the occurrence of the 4 clinical signs were performed by means of the exact version of the chi-square test. The Fisher's exact test was used for the comparison of percentages. The intra- and interexaminer reliability was assessed by means of the Cohen's kappa coefficient (α=.05). Results The results demonstrated that there was a significant association between self-reported bruxism and occurrence of the 4 clinical signs. Although the 2 groups were significantly different according to the distribution of the 4 clinical signs, the greatest differences occurred for the anterior and posterior attrition signs. Conclusions In this study, the occurrence of 4 clinical signs (posterior or anterior dental attrition, abfractions, and occlusal pits) was associated with self-reported bruxers. It is suggested that, primarily, signs of dental attrition may differentiate self-reported bruxers from nonbruxer subjects. (J Prosthet Dent 2008;100:41-46)
Abstract Statement of problem Making implant impressions with different angulations requires a more precise and time-consuming impression technique. Purpose The purpose of this in vitro study was to ...compare the accuracy of nonsplinted, splinted, and snap-fit impression techniques of internal connection implants with different angulations. Material and methods An experimental device was used to allow a clinical simulation of impression making by means of open and closed tray techniques. Three different impression techniques (nonsplinted, acrylic-resin splinted, and indirect snap-fit) for 6 internal-connected implants at different angulations (0, 15, 25 degrees) were examined using polyether. Impression accuracy was evaluated by measuring the differences in 3-dimensional (3D) position deviations between the implant body/impression coping before the impression procedure and the coping/laboratory analog positioned within the impression, using a coordinate measuring machine. Data were analyzed by 2-way ANOVA. Means were compared with the least significant difference criterion at P <.05. Results Results showed that at 25 degrees of implant angulation, the highest accuracy was obtained with the splinted technique (mean ±SE: 0.39 ±0.05 mm) and the lowest with the snap-fit technique (0.85 ±0.09 mm); at 15 degrees of angulation, there were no significant differences among splinted (0.22 ±0.04 mm) and nonsplinted technique (0.15 ±0.02 mm) and the lowest accuracy obtained with the snap-fit technique (0.95 ±0.15 mm); and no significant differences were found between nonsplinted and splinted technique at 0 degrees of implant placement. Conclusions Splinted impression technique exhibited a higher accuracy than the other techniques studied when increased implant angulations at 25 degrees were involved.
With a wide variety of post systems and materials available for the restoration of lost tooth structure of endodontically treated teeth, the clinical decision of which to use constitutes a challenge ...to dental practitioners. Cast metal post and cores are widely used for restoring endodontically treated teeth with extensive loss of coronal tooth structure and to retain metal-ceramic crowns. When dental aesthetics is of primary concern, the selection of the underlying restorative material becomes an important factor to consider. The fibre-reinforced posts combined with all-ceramic crowns offer a highly aesthetic outcome in anterior region restorations, but longterm evaluation is necessary in order to assess their clinical performance and longevity.