Lithium (Li) metal is a promising anode material for high‐energy density batteries. However, the unstable and static solid electrolyte interphase (SEI) can be destroyed by the dynamic Li ...plating/stripping behavior on the Li anode surface, leading to side reactions and Li dendrites growth. Herein, we design a smart Li polyacrylic acid (LiPAA) SEI layer high elasticity to address the dynamic Li plating/stripping processes by self‐adapting interface regulation, which is demonstrated by in situ AFM. With the high binding ability and excellent stability of the LiPAA polymer, the smart SEI can significantly reduce the side reactions and improve battery safety markedly. Stable cycling of 700 h is achieved in the LiPAA‐Li/LiPAA‐Li symmetrical cell. The innovative strategy of self‐adapting SEI design is broadly applicable, providing opportunities for use in Li metal anodes
Stretching exercises: A flexible lithium polyacrylic acid (LiPAA) solid electrolyte interphase (SEI) layer which is highly stretchable is designed to address the dynamic volume changes during Li plating/stripping on the Li anode surface in Li ion batteries. The LiPAA polymer SEI can significantly reduce the side reactions and improve the safety performance.
Defects have been found to enhance the electrocatalytic performance of NiFe‐LDH for oxygen evolution reaction (OER). Nevertheless, their specific configuration and the role played in regulating the ...surface reconstruction of electrocatalysts remain ambiguous. Herein, cationic vacancy defects are generated via aprotic‐solvent‐solvation‐induced leaking of metal cations from NiFe‐LDH nanosheets. DFT calculation and in situ Raman spectroscopic observation both reveal that the as‐generated cationic vacancy defects tend to exist as VM (M=Ni/Fe); under increasing applied voltage, they tend to assume the configuration VMOH, and eventually transform into VMOH‐H which is the most active yet most difficult to form thermodynamically. Meanwhile, with increasing voltage the surface crystalline Ni(OH)x in the NiFe‐LDH is gradually converted into disordered status; under sufficiently high voltage when oxygen bubbles start to evolve, local NiOOH species become appearing, which is the residual product from the formation of vacancy VMOH‐H. Thus, we demonstrate that the cationic defects evolve along with increasing applied voltage (VM → VMOH → VMOH‐H), and reveal the essential motif for the surface restructuration process of NiFe‐LDH (crystalline Ni(OH)x → disordered Ni(OH)x → NiOOH). Our work provides insight into defect‐induced surface restructuration behaviors of NiFe‐LDH as a typical precatalyst for efficient OER electrocatalysis.
Along with increasing voltage during the OER process, the structural evolution of cationic defects within NiFe‐LDH, where the simple vacancy VM changes to VMOH and then to the most reactive VMOH‐H, and the surface restructuration, where surface crystalline Ni(OH)x is converted to disordered Ni(OH)x and then to the surface local NiOOH species, are voltage‐regulated concurrent events defining the eventual catalytic performance of the precatalyst.
Inherent poor stability of perovskite nanocrystals (NCs) is the main impediment preventing broad applications of the materials. Here, TiO2 shell coated CsPbBr3 core/shell NCs are synthesized through ...the encapsulation of colloidal CsPbBr3 NCs with titanium precursor, followed by calcination at 300 °C. The nearly monodispersed CsPbBr3/TiO2 core/shell NCs show excellent water stability for at least three months with the size, structure, morphology, and optical properties remaining identical, which represent the most water‐stable inorganic shell passivated perovskite NCs reported to date. In addition, TiO2 shell coating can effectively suppress anion exchange and photodegradation, therefore dramatically improving the chemical stability and photostability of the core CsPbBr3 NCs. More importantly, photoluminescence and (photo)electrochemical characterizations exhibit increased charge separation efficiency due to the electrical conductivity of the TiO2 shell, hence leading to an improved photoelectric activity in water. This study opens new possibilities for optoelectronic and photocatalytic applications of perovskites‐based NCs in aqueous phase.
TiO2 shell coated CsPbBr3 core/shell nanocrystals are successfully constructed, resulting in excellent water, photo and thermal stability. TiO2 shell coating effectively increases charge separation efficiency, hence leading to an improved photoelectric activity in water.
Although single-atomically dispersed metal-N
on carbon support (M-NC) has great potential in heterogeneous catalysis, the scalable synthesis of such single-atom catalysts (SACs) with high-loading ...metal-N
is greatly challenging since the loading and single-atomic dispersion have to be balanced at high temperature for forming metal-N
. Herein, we develop a general cascade anchoring strategy for the mass production of a series of M-NC SACs with a metal loading up to 12.1 wt%. Systematic investigation reveals that the chelation of metal ions, physical isolation of chelate complex upon high loading, and the binding with N-species at elevated temperature are essential to achieving high-loading M-NC SACs. As a demonstration, high-loading Fe-NC SAC shows superior electrocatalytic performance for O
reduction and Ni-NC SAC exhibits high electrocatalytic activity for CO
reduction. The strategy paves a universal way to produce stable M-NC SAC with high-density metal-N
sites for diverse high-performance applications.
Human infections with zoonotic coronaviruses (CoVs), including severe acute respiratory syndrome (SARS)-CoV and Middle East respiratory syndrome (MERS)-CoV, have raised great public health concern ...globally. Here, we report a novel bat-origin CoV causing severe and fatal pneumonia in humans.
We collected clinical data and bronchoalveolar lavage (BAL) specimens from five patients with severe pneumonia from Wuhan Jinyintan Hospital, Hubei province, China. Nucleic acids of the BAL were extracted and subjected to next-generation sequencing. Virus isolation was carried out, and maximum-likelihood phylogenetic trees were constructed.
Five patients hospitalized from December 18 to December 29, 2019 presented with fever, cough, and dyspnea accompanied by complications of acute respiratory distress syndrome. Chest radiography revealed diffuse opacities and consolidation. One of these patients died. Sequence results revealed the presence of a previously unknown β-CoV strain in all five patients, with 99.8% to 99.9% nucleotide identities among the isolates. These isolates showed 79.0% nucleotide identity with the sequence of SARS-CoV (GenBank NC_004718) and 51.8% identity with the sequence of MERS-CoV (GenBank NC_019843). The virus is phylogenetically closest to a bat SARS-like CoV (SL-ZC45, GenBank MG772933) with 87.6% to 87.7% nucleotide identity, but is in a separate clade. Moreover, these viruses have a single intact open reading frame gene 8, as a further indicator of bat-origin CoVs. However, the amino acid sequence of the tentative receptor-binding domain resembles that of SARS-CoV, indicating that these viruses might use the same receptor.
A novel bat-borne CoV was identified that is associated with severe and fatal respiratory disease in humans.
Due to its storage and retrieval efficiency, cross-modal hashing (CMH) has been widely used for cross-modal similarity search in many multimedia applications. According to the training strategy, ...existing CMH methods can be mainly divided into two categories: relaxation-based continuous methods and discrete methods. In general, the training of relaxation-based continuous methods is faster than that of discrete methods, but the accuracy of relaxation-based continuous methods is not satisfactory. On the contrary, the accuracy of discrete methods is typically better than that of the relaxation-based continuous methods, but the training of discrete methods is very time-consuming. In this paper, we propose a novel CMH method, called Discrete Latent Factor model-based cross-modal Hashing (DLFH), for cross modal similarity search. DLFH is a discrete method which can directly learn the binary hash codes for CMH. At the same time, the training of DLFH is efficient. Experiments show that the DLFH can achieve significantly better accuracy than existing methods, and the training time of DLFH is comparable to that of the relaxation-based continuous methods which are much faster than the existing discrete methods.
A Kagome structure covalent organic framework (COF) film with three‐state NIR electrochromic properties was designed and synthesized. The COFTPDA‐PDA film is composed of hexagonal nanosheets with ...high crystallinity and has three reversible color states at different applied potentials. It has high absorption spectra changes in the NIR region, ascribed to the strong intervalence charge transfer (IVCT) interaction of the Class III mixed‐valence systems of the conjugated triphenylamine species. The film showed sub‐second response time (1.3 s for coloring and 0.7 s for bleaching at 1050 nm) and long retention time in the NIR region. COFTPDA‐PDA film shows superior NIR electrochromic properties in term of response time and stability, attributed to the highly ordered porous structure and the π–π stacking structure of the COFTPDA‐PDA architecture. The COFTPDA‐PDA film was applied in mimicking a flip‐flop logic gate with optical memory function.
A Kagome structure covalent organic framework (COF) film was synthesized and exhibited three‐state electrochromic properties with sub‐second response time and long retention time in the near‐infrared region. Taking potential and absorbance as input and output signal, respectively, a mimicking logic gate with optical memory functions was demonstrated based on the COFTPDA‐PDA film.
Knee osteoarthritis (OA) is a chronic, degenerative bone and joint disease. It can lead to major pressure to the quality of life and mental health of patients, and also brings a serious economic ...burden to society. However, it is difficult for patients with knee OA to access rehabilitation when discharging from the hospital. Internet-based rehabilitation is one of the promising telemedicine strategies for the improvement of knee OA, but the effect of different telerehabilitation strategies on knee OA is not clear.
The aim of this systematic review and meta-analysis was to identify telerehabilitation strategies attributing to the improvement of pain and physical function outcomes in patients with knee OA.
We reviewed and analyzed telerehabilitation strategies from randomized controlled trials (RCTs) comparing telerehabilitation with conventional treatment or usual care. For each strategy, we examined whether RCTs that applied the telerehabilitation strategy resulted in a significant improvement in pain or physical function compared with conventional treatment or usual care.
We included 6 RCTs (n=734) incorporating 8 different telerehabilitation strategies. The duration of the interventions ranged from 1 to 48 weeks, and sample sizes ranged from 20 to 350 patients. The results showed that RCTs that provided telerehabilitation were found to be more effective than conventional treatments for improving pain (P=.003; standardized mean difference SMD -0.21, 95% CI -0.35 to -0.07), but not physical function (P=.24; SMD -0.09, 95% CI -0.25 to 0.06). Furthermore, this systematic review and meta-analysis indicated that there is no significant correlation between different telerehabilitation strategies and the pain and physical function of patients with knee OA.
This systematic review and meta-analysis showed that telerehabilitation programs could relieve pain but not improve physical function for patients with knee OA. These results indicated that telerehabilitation is beneficial for the implementation of home rehabilitation exercises for patients with knee OA, thereby reducing the economic burden of health. However, there were limitations in terms of the number of search results and the number of studies that were eligible for this review and meta-analysis. Therefore, the results need to be interpreted with caution, and more high-quality studies with large samples are needed to focus on the long-term outcomes of telerehabilitation for patients with knee OA to address this limitation.
A readily available small molecular hole‐transporting material (HTM), OMe‐TATPyr, was synthesized and tested in perovskite solar cells (PSCs). OMe‐TATPyr is a two‐dimensional π‐conjugated molecule ...with a pyrene core and four phenyl‐thiophene bridged triarylamine groups. It can be readily synthesized in gram scale with a low lab cost of around US$ 50 g−1. The incorporation of the phenyl‐thiophene units in OMe‐TATPyr are beneficial for not only carrier transportation through improved charge delocalization and intermolecular stacking, but also potential trap passivation via Pb–S interaction as supported by depth‐profiling XPS, photoluminescence, and electrochemical impedance analysis. As a result, an impressive best power conversion efficiency (PCE) of up to 20.6 % and an average PCE of 20.0 % with good stability has been achieved for mixed‐cation PSCs with OMe‐TATPyr with an area of 0.09 cm2. A device with an area of 1.08 cm2 based on OMe‐TATPyr demonstrates a PCE of 17.3 %.
A 2D hole‐transporting material with a pyrene core and four phenyl‐thiophene bridged triarylamine groups, OMe‐TATPyr, was readily synthesized at low cost on a gram scale. A power conversion efficiency (PCE) of up to 20.6 % (average PCE 20.0 %) was achieved for mixed‐cation perovskite solar cells with OMe‐TATPyr, outperforming devices with Spiro‐OMeTAD.
PDF
