Introduction
The authors update their results of wrist hemiarthroplasty for irreparable distal radius fracture in the elderly, at a minimum of 2-year follow-up.
Materials and methods
Between 2011 and ...2018, 25 consecutive independent elderly patients (24 female, 27 wrists) were treated with wrist hemiarthroplasty for distal radius fracture at a single institution. The average age was 77 years (range 65–88). They all were independent at home. A total of 19 wrists were treated at the acute stage, and 8 secondary procedures. The average follow-up was 32 months (range 24–44).
Results
There was no dislocation, loosening, infection nor removal of the implants. We observed 3 CRPS. At final follow-up, the average VAS pain was 1/10, mean forearm pronation/supination arc was 150°, and mean active flexion–extension arc was 60°. Average wrist extension was 36°. Mean grip strength was 68% of contralateral side. Mean Lyon wrist score was 74%. Mean Quick DASH score was 26%, and mean PRWE score was 25%.
Discussion
Our data suggest that treatment of acute irreparable distal radius fracture in the independent elderly patient with a bone-preserving primary wrist hemiarthroplasty may be a viable option. Longer-term follow-up are needed to confirm these preliminary data.
In reverse shoulder arthroplasty (RSA), the ideal combination of baseplate lateralization (BL), glenosphere size (GS), and glenosphere overhang (GOH) with a commonly used 145° neck shaft angle (NSA) ...is unclear. This is the first study evaluating correlations of body height (BH), humeral head size (HS), glenoid height (GH), and association of gender with best glenoid configurations for range of motion (ROM) maintaining anatomic lateralization (aLAT) for optimized muscle length in 145° and less distalized 135° RSA.
In this computer model study, 22 computed tomographies without joint narrowing were analyzed (11 male/female). A standardized semi-inlay 145° platform stem was combined with 20 glenoid configurations (baseplate B 25, 25 + 3/+6 lateralized l, 29, 29 + 3/6l combined with glenosphere 36, 36 + 2 eccentric e, 36 + 3l, 39, 39 + 3e, 39 + 3l , 42, 42 + 4e). Abduction-adduction, flexion-extension, external rotation-internal rotation, total ROM (TROM), and total notching relevant (TNR) ROM were computed, best TROM models respecting aLAT (-1 mm to +1 mm) and HS/GH recorded. Second, the 145° models (Ascend Flex stem; Stryker, Kalamazoo, MI, USA) were converted and compared to a 135° inlay RSA (New Perform stem; Stryker, Kalamazoo, MI, USA) maintaining GOH (6.5-7 mm) and aLAT.
Best 145° models had eccentric glenospheres (mean BL: 3.5 mm, GOH 8.8 mm, GS 38.1 mm, distalization 23 mm). The 135° models had concentric glenospheres, mean BL 3.8 mm, GOH 6.9 mm, GS 39.7 mm, and distalization 14.1 mm. HS showed the strongest positive correlation with BL in 145° and 135° models (0.65/0.79). Despite reduced GOH in smaller females with a 135° NSA, adduction, external rotation, extension, TNR ROM, and TROM were significantly increased (P = .02, P = .005, P = .005, P = .004, P = .003), abduction however reduced (P = .02). The same trends were seen for males.
HS is a practical measure in surgery or preoperatively, and the strong positive correlation with BL is a useful planning aid. Despite reduction of GOH, conversion to a less distalized 135° NSAinlay design is powerful to maintain and even significantly increase all components of TNR ROM (extension/external rotation/adduction) in small females with the drawback of reduced abduction which may however be compensated by scapula motion. Lateralization with a less distalized 135° RSA optimizes muscle length, may facilitate subscapularis repair, and maintains highest rigid body motion.
The middle glenohumeral ligament (MGHL) is one of the three ligaments that stabilize the anterior capsule of the shoulder. Recent work suggests that it inserts distally into the deep layer of the ...subscapularis tendon. The role of the MGHL remains debated. The hypothesis of this study was that the MGHL plays a significant functional role in limiting external rotation of the shoulder while allowing a wide range of motion through its distal insertion into the subscapularis rather than directly onto the humerus.
In a cadaveric study performed on 20 shoulders (10 subjects), the MGHL and the other anterior structures of the shoulder were successively cut according to a standardized protocol. At each stage, the external rotation range of the shoulder was measured with the arm at the side (ER 1) and in 90° abduction (ER 2) using a goniometer. After dissection, the structure of the MGHL and its distal insertion were analyzed.
Cutting the MGHL led to significant increases in ER 1 but not in ER 2. Shoulder range of motion in ER 1 increased on average by 15 ± 5° (P < .001) after cutting the MGHL and by 21 ± 11° (P < .001) after subscapularis peel. The range of motion in ER 2 increased by 3 ± 4° (P = .048) after cutting the MGHL, by 4 ± 6° (P = .02) after subscapularis peel and by 25 ± 8° (P < .001) after cutting the inferior glenohumeral ligament. The MGHL was present in all dissected shoulders. It was leaf-like in 12 cases, cord-like in 6 cases and had a vestigial appearance in 2 cases. The distal insertion was in all cases in the deep layer of the subscapularis in a thickening of the anterior capsule in the superior part of the muscle, except for two cases in which the tendinous part of the subscapularis was also involved.
The MGHL limited shoulder external rotation by a similar amount as the subscapularis muscle. Further studies are required to understand the clinical relevance of these findings, notably for the treatment of shoulder stiffness.
There is growing evidence into the structure and function of the anterolateral ligament (ALL) of the knee. However, debate still exists about the anatomical characteristics, biomechanical role, and ...even the existence of the ALL, despite numerous cadaveric, biomechanical, and clinical studies. This article describes, with video illustration, the surgical dissection of the ALL in human fetal lower limbs, including determination of detailed anatomical and histological features of the ALL during fetal development. The ALL was clearly identified in dissected fetal knees, and histologic analysis shows well-organized, dense collagenous tissue fibers with elongated fibroblasts, consistent with the properties of a ligament.
Display omitted
We report the long-term patient-reported outcomes and objective outcomes of a homodigital neurovascular island flap for distal phalangeal amputations in the fingers (with the thumb excluded) for 20 ...patients at a median follow-up of 4.4 years (IQR 2.2 to 12.3). We assessed the global subjective and aesthetic outcomes, range of motion, sensitivity and strength. The patient-reported median subjective global score was 7.5/10 points (IQR 7 to 9) and the aesthetic score was 8/10 points (IQR 8 to 9). Range of motion, sensitivity and strength were similar to the uninjured side. Stiffness was present in more than half of the cases; 14 patients had a hook nail deformity and seven patients reported symptomatic cold intolerance. At a long-term follow-up, the patient-reported outcome measures and objective outcomes of this flap are satisfactory and it is a safe and reliable flap.
Level of evidence: IV
Total shoulder arthroplasty (TSA) aims to reconstruct the premorbid anatomy of a pathologic shoulder. A healthy contralateral shoulder could be useful as a template in planning TSA. The symmetry ...between the left and right shoulders in healthy patients remains to be proved. The purpose of this study was to compare the 3-dimensional anatomy of the glenoid between sides in a healthy population.
A multinational computed tomography scan database was retrospectively reviewed for all healthy bilateral shoulders in patients aged between 18 and 50 years. One hundred thirty pairs of healthy shoulder computed tomography scans were analyzed, and glenoid version, inclination, width, and height, as well as glenoid lateral offset and scapula lateral offset, were measured. All anatomic measures were computed with Blueprint, validated 3-dimensional planning software. The intraclass correlation coefficient was determined for each measure between left and right shoulders. The minimal detectable change (MDC) was calculated using the following formula: MDC=2×1.96×Standarderrorofmeasurement.
The comparison between 130 pairs of healthy scapulae showed statistically significant differences in absolute values between right and left glenoid version (−5.3° vs. −4.6°, P < .01), inclination (8.4° vs. 9.3°, P < .01), and width (25.6 mm vs. 25.4 mm, P < .01), as well as scapula offset (105.8 mm vs. 106.2 mm, P < .01). Glenoid height was comparable between right and left shoulders (33.3 mm vs. 33.3 mm, P = .9). The differences between the means were always inferior to the MDC regarding glenoid version, inclination, height, and width, as well as scapula offset. Very strong intraclass correlation coefficients between the left and right shoulders were found for all evaluated paired measures.
Healthy contralateral scapulae are highly reliable to predict inclination, height, width, and scapula offset and are reliable to predict version of a given scapula. Paired right and left scapulae were not statistically symmetrical regarding mean glenoid version, inclination, and width, as well as scapula offset. Nevertheless, the reported differences were not higher than the MDC for this cohort, confirming that healthy contralateral shoulders can be a useful template in TSA preoperative planning.
Knowledge of premorbid glenoid parameters at the time of shoulder arthroplasty, such as inclination, version, joint line position, height, and width, can assist with implant selection, implant ...positioning, metal augment sizing, and/or bone graft dimensions. The objective of this study was to validate a scapular statistical shape model (SSM) in predicting patient-specific glenoid morphology in scapulae with clinically relevant glenoid erosion patterns.
Computed tomography scans of 30 healthy scapulae were obtained and used as the control group. Each scapula was then virtually eroded to create 7 erosion patterns (Walch A1, A2, B2, B3, D, Favard E2, and E3). This resulted in 210 uniquely eroded glenoid models, forming the eroded glenoid group. A scapular SSM, created from a different database of 85 healthy scapulae, was then applied to each eroded scapula to predict the premorbid glenoid morphology. The premorbid glenoid inclination, version, height, width, radius of best-fit sphere, and glenoid joint line position were automatically calculated for each of the 210 eroded glenoids. The mean values for all outcome variables were compared across all erosion types between the healthy, eroded, and SSM-predicted groups using a 2-way repeated measures analysis of variance.
The SSM was able to predict the mean premorbid glenoid parameters of the eroded glenoids with a mean absolute difference of 3° ± 2° for inclination, 3° ± 2° for version, 2 ± 1 mm for glenoid height, 2 ± 1 mm for glenoid width, 5 ± 4 mm for radius of best-fit sphere, and 1 ± 1 mm for glenoid joint line. The mean SSM-predicted values for inclination, version, height, width, and radius were not significantly different than the control group (P > .05).
An SSM has been developed that can reliably predict premorbid glenoid morphology and glenoid indices in patients with common glenoid erosion patterns. This technology can serve as a useful template to visually represent the premorbid healthy glenoid in patients with severe glenoid bony erosions. Knowledge of the premorbid glenoid preoperatively can assist with implant selection, positioning, and sizing.
Restoration of an anatomic joint line after anatomic total shoulder arthroplasty and of the optimal lateral offset after reverse total shoulder arthroplasty may be relatively straightforward when the ...glenoid does not present with severe erosion. However, in cases of severe glenoid bone loss, the surgeon is left with no preoperative landmark to restore these parameters. The objective of this study was to use statistical shape modeling, to predict the premorbid morphology of the glenoid. We hypothesized that this would allow us to accurately determine premorbid glenoid version and inclination, in addition to accurately quantifying bone loss and medialization.
Fifty-six bilateral computed tomography scans of the shoulders of patients scheduled for shoulder arthroplasty and determined to have unilateral osteoarthritis (primary osteoarthritis or cuff tear arthropathy with a healthy contralateral side) were obtained. A statistical shape model was automatically applied on the pathologic arthritic side to predict its premorbid anatomy. Glenoid version, inclination, height, width, and glenoid and scapula lateral offset were measured automatically. These measurements were obtained on the pathological arthritic cases, on the contralateral control healthy cases, and on the premorbid predictions of the pathological arthritic cases and were compared pair by pair.
The mean difference between the pathological arthritic side and the contralateral healthy side was 9.1° ± 7.3° for version, 4.8° ± 4.8° for inclination, 4.9 ± 4.5 mm for height, 4.7 ± 5.3 mm for width, 2.4 ± 1.9 mm for scapula lateral offset, and the glenoid lateral offset was 1.5 ± 1.5 mm. The mean difference between the premorbid prediction of the pathological side and the contralateral healthy side was reduced to 3.3° ± 2.4° for version, 3.4° ± 2.6° for inclination, 3.0 ± 1.9 mm for height, 2.3 ± 1.4 mm for width, 2.2 ± 1.7 mm for scapula lateral offset, and the glenoid lateral offset was 0.9 ± 0.8 mm.
This study shows that statistical shape modeling can allow accurate prediction of the premorbid morphology of the glenoid. This could help optimize implant selection and positioning after anatomic total shoulder arthroplasty and reverse total shoulder arthroplasty to restore optimal soft-tissue tension.
The etiology of humeral posterior subluxation remains unknown, and it has been hypothesized that horizontal muscle imbalance could cause this condition. The objective of this study was to compare the ...ratio of anterior-to-posterior rotator cuff and deltoid muscle volume as a function of humeral subluxation and glenoid morphology when analyzed as a continuous variable in arthritic shoulders.
In total, 333 computed tomography scans of shoulders (273 arthritic shoulders and 60 healthy controls) were included in this study and were segmented automatically. For each muscle, the volume of muscle fibers without intramuscular fat was measured. The ratio between the volume of the subscapularis and the volume of the infraspinatus plus teres minor (AP ratio) and the ratio between the anterior and posterior deltoids (APdeltoid) were calculated. Statistical analyses were performed to determine whether a correlation could be found between these ratios and glenoid version, humeral subluxation, and/or glenoid type per the Walch classification.
Within the arthritic cohort, no statistically significant difference in the AP ratio was found between type A glenoids (1.09 ± 0.22) and type B glenoids (1.03 ± 0.16, P = .09), type D glenoids (1.12 ± 0.27, P = .77), or type C glenoids (1.10 ± 0.19, P > .999). No correlation was found between the AP ratio and glenoid version (ρ = –0.0360, P = .55) or humeral subluxation (ρ = 0.076, P = .21). The APdeltoid ratio of type A glenoids (0.48 ± 0.15) was significantly greater than that of type B glenoids (0.35 ± 0.16, P < .01) and type C glenoids (0.21 ± 0.10, P < .01) but was not significantly different from that of type D glenoids (0.64 ± 0.34, P > .999). When evaluating both healthy control and arthritic shoulders, moderate correlations were found between the APdeltoid ratio and both glenoid version (ρ = 0.55, P < .01) and humeral subluxation (ρ = –0.61, P < .01).
This in vitro study supports the use of software for fully automated 3-dimensional reconstruction of the 4 rotator cuff muscles and the deltoid. Compared with previous 2-dimensional computed tomography scan studies, our study did not find any correlation between the anteroposterior muscle volume ratio and glenoid parameters in arthritic shoulders. However, once deformity occurred, the observed APdeltoid ratio was lower with type B and C glenoids. These findings suggest that rotator cuff muscle imbalance may not be the precipitating etiology for the posterior humeral subluxation and secondary posterior glenoid erosion characteristic of Walch type B glenoids.
