Initial elevation bias in subjective reports Shrout, Patrick E.; Stadler, Gertraud; Lane, Sean P. ...
Proceedings of the National Academy of Sciences - PNAS,
01/2018, Letnik:
115, Številka:
1
Journal Article
Recenzirano
Odprti dostop
People’s reports of their thoughts, feelings, and behaviors are used in many fields of biomedical and social science. When these states have been studied over time, researchers have often observed an ...unpredicted and puzzling decrease with repeated assessment. When noted, this pattern has been called an “attenuation effect,” suggesting that the effect is due to bias in later reports. However, the pattern could also be consistent with an initial elevation bias. We present systematic, experimental investigations of this effect in four field studies (study 1: n = 870; study 2: n = 246; study 3: n = 870; study 4: n = 141). Findings show clear support for an initial elevation bias rather than a later decline. This bias is larger for reports of internal states than for behaviors and for negative mental states and physical symptoms than for positive states. We encourage increased awareness and investigation of this initial elevation bias in all research using subjective reports.
The benefits of close relationships for mental and physical health are well documented. One of the mechanisms presumed to underlie these effects is social support, whereby close others provide ...practical and emotional assistance in times of need. Although there is no doubt that generalized perceptions of support availability are beneficial, research examining actual instances of support receipt has found unexpectedly mixed results. Receiving support sometimes has positive effects, but null or even negative effects are common. In this article, we review our multimethod program of research that seeks to understand and explain the costs of receiving social support. We focus on reductions in the recipient's sense of relationship equity and self‐efficacy as mechanisms of this effect and examine a number of other moderating factors. Although we have found that receiving support incurs costs on average, there is considerable variability yet to be explained. Using diary data from 312 persons preparing to take a challenging exam, we examined the potential of individual differences in neuroticism, agreeableness, and attachment insecurity to explain variability in experienced support costs. We close with new questions about why received support may be beneficial or benign in some situations while being especially toxic in others.
Display omitted
•PECAM-1 is commonly-used as an endothelial cell marker. The structural details of homophilic interaction of sPECAM-1 are unknown.•Recombinant sPECAM-1 in large quantity by Drosophila ...expression system.•We observed the predominant presence of sPECAM-1 as a dimer on gel filtration chromatography and dynamic light scattering.•Small-angle X-ray scattering reveals sPECAM-1 is a homophilic adhesion protein. sPECAM-1 formed a symmetric homodimer of Ω-shape in solution.•The sPECAM-1 dimer is mediated through the intermolecular interactions through the first N-terminal domain of sPECAM-1 (D1).
Platelet endothelial cell adhesion molecule 1 (PECAM-1) is a cell surface receptor widely distributed on endothelium and hematopoietic-derived cells, and maintain the integrity of the blood vessels. PECAM-1 is widely recognized as an endothelial cell marker. The homophilic interaction through its extracellular domain of PECAM-1 (soluble PECAM-1, or sPECAM-1) is important to its functions. However, structural details for such dimerization are not fully understood. Here we report the production of recombinant sPECAM-1 in large quantity by Drosophila expression system and the small-angle X-ray diffraction (SAXS) study. The recombinant sPECAM-1 was found to form one population of dimer, but not oligomer, and was able to bind to heparin immobilized on a chip in surface plasmon resonance imaging (SPRi) binding experiments. The results of SAXS demonstrated that sPECAM-1 formed a symmetric homodimer of Ω-shape in solution, and each protomer adopted an extended conformation. The dimer is mediated through the intermolecular interactions through the first N-terminal domain (D1) of sPECAM-1. This model provides new structural information for its homophilic interaction mechanism.
We argue that the self is intrinsically embedded in an interpersonal context such that it varies in IF-THEN terms, as the relational self. We have demonstrated that representations of the significant ...other and the relationship with that other are automatically activated by situational cues and that this activation affects both experienced and expressed aspects of the self and personality. Here, we expand on developments of the IF-THEN cognitive-affective framework of personality system (Mischel and Shoda, 1995), by extending it to the domain of interpersonal relationships at the dyadic level (Andersen and Chen, 2002). Going beyond Mischel's early research (Mischel, 1968), our framework combines social cognition and learning theory with a learning-based psychodynamic approach, which provides the basis for extensive research on the social-cognitive process of transference and the relational self as it arises in everyday social interactions (Andersen and Cole, 1990), evidence from which contributes to a modern conceptualization of personality that emphasizes the centrality of the situation.
► The SAAM was more reliable in measuring changes in attachment than the ECR. ► Researchers interested in assessing change in attachment should consider the SAAM. ► Studies of change should assess ...reliability using appropriate psychometric methods. ► These results may not generalize to studies with shorter or longer time frames.
Recently attachment researchers have become interested in how attachment changes within an individual due to social or cognitive context fluctuations. Such analyses of process are limited by unreliability of change scores. Traditional estimates of between-person reliability (Cronbach’s alpha) are not informative about how reliable a measure is at capturing within-person change. In two longitudinal studies, we examined the reliability of the State Adult Attachment Measure (SAAM; Gillath, Hart, Noftle, & Stockdale, 2009) and the Experiences in Close Relationships scale (ECR; Brennan, Clark, & Shaver, 1998), in capturing attachment change. We used generalizability theory analyses to estimate the between- and within-person reliabilities of both scales. Even with fewer items, the reliability of change for the SAAM was higher than that of the ECR.
We report on the first search for nuclear recoils from dark matter in the form of weakly interacting massive particles (WIMPs) with the XENONnT experiment, which is based on a two-phase time ...projection chamber with a sensitive liquid xenon mass of 5.9 ton. During the (1.09±0.03) ton yr exposure used for this search, the intrinsic ^{85}Kr and ^{222}Rn concentrations in the liquid target are reduced to unprecedentedly low levels, giving an electronic recoil background rate of (15.8±1.3) events/ton yr keV in the region of interest. A blind analysis of nuclear recoil events with energies between 3.3 and 60.5 keV finds no significant excess. This leads to a minimum upper limit on the spin-independent WIMP-nucleon cross section of 2.58×10^{-47} cm^{2} for a WIMP mass of 28 GeV/c^{2} at 90% confidence level. Limits for spin-dependent interactions are also provided. Both the limit and the sensitivity for the full range of WIMP masses analyzed here improve on previous results obtained with the XENON1T experiment for the same exposure.
We report on a blinded analysis of low-energy electronic recoil data from the first science run of the XENONnT dark matter experiment. Novel subsystems and the increased 5.9 ton liquid xenon target ...reduced the background in the (1, 30) keV search region to (15.8±1.3) events/(ton×year×keV), the lowest ever achieved in a dark matter detector and ∼5 times lower than in XENON1T. With an exposure of 1.16 ton-years, we observe no excess above background and set stringent new limits on solar axions, an enhanced neutrino magnetic moment, and bosonic dark matter.
Display omitted
Three-dimensional printing (3DP), though developed for nonmedical applications and once regarded as futuristic only, has recently been deployed for the fabrication of pharmaceutical ...products. However, the existing feeding materials (inks and filaments) that are used for printing drug products have various shortcomings, including the lack of biocompatibility, inadequate extrudability and printability, poor drug loading, and instability. Here, we have sought to develop a filament using a single pharmaceutical polymer, with no additives, which can be multi-purposed and manipulated by computational design for the preparation of tablets with desired release and absorption patterns. As such, we have used hydroxypropyl-methylcellulose (HPMC) and diltiazem, a model drug, to prepare both drug-free and drug-impregnated filaments, and investigated their thermal and crystalline properties, studied the cytotoxicity of the filaments, designed and printed tablets with various infill densities and patterns. By alternating the drug-free and drug-impregnated filaments, we fabricated various types of tablets, studied the drug release profiles, and assessed oral absorption in rats. Both diltiazem and HPMC were stable at extrusion and printing temperatures, and the drug loading was 10% (w/w). The infill density, as well as infill patterns, influenced the drug release profile, and thus, when the infill density was increased to 100%, the percentage of drug released dramatically declined. Tablets with alternating drug-free and drug-loaded layers showed delayed and intermittent drug release, depending on when the drug-loaded layers encountered the dissolution media. Importantly, the oral absorption patterns accurately reproduced the drug release profiles and showed immediate, extended, delayed and episodic absorption of the drug from the rat gastrointestinal tract (GIT). Overall, we have demonstrated here that filaments for 3D printers can be prepared from a pharmaceutical polymer with no additives, and the novel computational design allows for fabricating tablets with the capability of producing distinct absorption patterns after oral administration.
Microbes play key roles in various biogeochemical processes, including carbon (C) and nitrogen (N) cycling. However, changes of microbial community at the functional gene level by livestock grazing, ...which is a global land‐use activity, remain unclear. Here we use a functional gene array, GeoChip 4.0, to examine the effects of free livestock grazing on the microbial community at an experimental site of Tibet, a region known to be very sensitive to anthropogenic perturbation and global warming. Our results showed that grazing changed microbial community functional structure, in addition to aboveground vegetation and soil geochemical properties. Further statistical tests showed that microbial community functional structures were closely correlated with environmental variables, and variations in microbial community functional structures were mainly controlled by aboveground vegetation, soil C/N ratio, and NH4+‐N. In‐depth examination of N cycling genes showed that abundances of N mineralization and nitrification genes were increased at grazed sites, but denitrification and N‐reduction genes were decreased, suggesting that functional potentials of relevant bioprocesses were changed. Meanwhile, abundances of genes involved in methane cycling, C fixation, and degradation were decreased, which might be caused by vegetation removal and hence decrease in litter accumulation at grazed sites. In contrast, abundances of virulence, stress, and antibiotics resistance genes were increased because of the presence of livestock. In conclusion, these results indicated that soil microbial community functional structure was very sensitive to the impact of livestock grazing and revealed microbial functional potentials in regulating soil N and C cycling, supporting the necessity to include microbial components in evaluating the consequence of land‐use and/or climate changes.
Multiple viable theoretical models predict heavy dark matter particles with a mass close to the Planck mass, a range relatively unexplored by current experimental measurements. We use 219.4 days of ...data collected with the XENON1T experiment to conduct a blind search for signals from multiply interacting massive particles (MIMPs). Their unique track signature allows a targeted analysis with only 0.05 expected background events from muons. Following unblinding, we observe no signal candidate events. This Letter places strong constraints on spin-independent interactions of dark matter particles with a mass between 1×10^{12} and 2×10^{17} GeV/c^{2}. In addition, we present the first exclusion limits on spin-dependent MIMP-neutron and MIMP-proton cross sections for dark matter particles with masses close to the Planck scale.
PDF
