Constructing advanced functional nanomaterials with pre‐designed organized morphologies from low‐dimension synthetic and biological components is challenging. Herein, we report an efficient and ...universal amphiphilicity‐driven assembly strategy to construct “hairy” flexible hybrid nanosheets with a 1D cellulose nanofibers (CNFs) net conformally wrapped around 2D graphene oxide (GO) monolayers. This interface‐driven bio‐synthetic assembly is facilitated by tailoring the surface chemistry of flexible GO sheets, resulting in individual sheets tightly surrounded by dense conformal nanocellulose network. The mechanical stability of the products far exceeds the compressive instability limits of both individual components. Additionally, the CNF network significantly enhances the wetting ability of initial hydrophobic reduced GO nanosheets, allowing fast water transport combined with high filtration efficiency.
Hairy graphenes: An amphiphilicity‐driven assembly strategy to give flexible hybrid nanosheets with a net of 1D cellulose nanofibers (CNFs) wrapped around 2D graphene oxide (GO) monolayers. The mechanical stability of the products far exceeds the compressive instability limits of both individual components.
The stimuli-responsive character of elastin-like polypeptides (ELP) has led to their use in a wide range of applications. The temperature-triggered aggregation, or LCST behavior, of ELPs is a complex ...and multistep phenomenon, which proposed to include the structural transitions, loss of hydrophobic hydration, expulsion of water molecules and physical association of chains. Thus, the origin and detailed mechanism of LCST in ELPs is difficult to elucidate. Here, to gain insights into structure and dynamics of coacervates, we performed all-atom molecular dynamics simulations of 27 90-mer ELPs in explicit water at 350 K. Two sequences, poly(VGPVG)18 and poly(VPGVG)18, were examined due to their experimentally observed differences in thermal hysteresis albeit identical overall composition but different arrangement of amino acids. The simulation results indicate that surface hydrophobicity of poly(VGPVG) aggregate is less than that of the poly(VPGVG) aggregate, and there are marked changes in torsion angles and the propensities of secondary structural motifs during the aggregation process. Moreover, there are significant differences between structure of a single polypeptide in water and structure within the aggregate. Overall, the aggregation process is driven by the formation of peptide–peptide interactions whereas the average hydration of peptides remains almost the same between dissolved and aggregated states. Even though the aggregation is driven by the hydrophobic interactions, ELP coacervate has no hydrophobic core and contains many water molecules. Overall, our findings provide an insight into the sequence-dependent structure of coacervates and molecular behavior of individual peptides during aggregation.
Elastin-like polypeptides (ELPs) with the repeat sequence of VPGVG are widely used as a model system for investigation of lower critical solution temperature (LCST) transition behavior. In this ...paper, the effect of temperature on the structure, dynamics and association of (VPGVG)18 in aqueous solution is investigated using atomistic molecular dynamics simulations. Our simulations show that as the temperature increases the ELP backbones undergo gradual conformational changes, which are attributed to the formation of more ordered secondary structures such as β-strands. In addition, increasing temperature changes the hydrophobicity of the ELP by exposure of hydrophobic valine-side chains to the solvent and hiding of proline residues. Based on our simulations, we conclude that the transition behavior of (VPGVG)18 can be attributed to a combination of thermal disruption of the water network that surrounds the polypeptide, reduction of solvent accessible surface area of the polypeptide, and increase in its hydrophobicity. Simulations of the association of two (VPGVG)18 molecules demonstrated that the observed gradual changes in the structural properties of the single polypeptide chain are enough to cause the aggregation of polypeptides above the LCST. These results lead us to propose that the LCST phase behavior of poly(VPGVG) is a collective phenomenon that originates from the correlated gradual changes in single polypeptide structure and the abrupt change in properties of hydration water around the peptide and is a result of a competition between peptide–peptide and peptide–water interactions. This is a computational study of an important intrinsically disordered peptide system that provides an atomic-level description of structural features and interactions that are relevant in the LCST phase behavior.
Magnetic nanoparticles (MNPs) can organize into novel structures in solutions with excellent order and unique geometries. However, studies of the self-assembly of smaller MNPs are challenging due to ...a complicated interplay between external magnetic fields and van der Waals, electrostatic, dipolar, steric, and hydrodynamic interactions. Here, we present a novel all-atom molecular dynamics simulation method to enable detailed studies of the dynamics, self-assembly, structure, and properties of MNPs as a function of core sizes and shapes, ligand chemistry, solvent properties, and external field. We demonstrate the use and effectiveness of the model by simulating the self-assembly of oleic acid ligand-functionalized magnetite (Fe3O4) nanoparticles, with spherical and cubic shapes, into rings, lines, chains, and clusters under a uniform external magnetic field. We found that the long-range electrostatic interactions can favor the formation of a chain over a ring, the ligands promote MNP cluster growth, and the solvent can reduce the rotational diffusion of the MNPs. The algorithm has been parallelized to take advantage of multiple processors of a modern computer and can be used as a plugin for the popular simulation software LAMMPS to study the behavior of small MNPs and gain insights into the physics and chemistry of different magnetic assembly processes with atomistic details.
A six-lobed membrane spanning cellulose synthesis complex (CSC) containing multiple cellulose synthase (CESA) glycosyltransferases mediates cellulose microfibril formation. The number of CESAs in the ...CSC has been debated for decades in light of changing estimates of the diameter of the smallest microfibril formed from the β-1,4 glucan chains synthesized by one CSC. We obtained more direct evidence through generating improved transmission electron microscopy (TEM) images and image averages of the rosette-type CSC, revealing the frequent triangularity and average cross-sectional area in the plasma membrane of its individual lobes. Trimeric oligomers of two alternative CESA computational models corresponded well with individual lobe geometry. A six-fold assembly of the trimeric computational oligomer had the lowest potential energy per monomer and was consistent with rosette CSC morphology. Negative stain TEM and image averaging showed the triangularity of a recombinant CESA cytosolic domain, consistent with previous modeling of its trimeric nature from small angle scattering (SAXS) data. Six trimeric SAXS models nearly filled the space below an average FF-TEM image of the rosette CSC. In summary, the multifaceted data support a rosette CSC with 18 CESAs that mediates the synthesis of a fundamental microfibril composed of 18 glucan chains.
The physical origin of the lower critical solution temperature (LCST) behavior of a variety of fluids, including elastin-like polypeptides (ELPs), has been studied for the past few decades. As is the ...case for polymer solutions, LCST behavior of ELPs is invariably reported for large systems of molecules and is considered evidence for collective behavior. In contrast, we find evidence for properties changes associated with LCST behavior in a single molecule by performing long atomic-level molecular dynamics simulation on the ELP sequences (Val-Pro-Gly-Val-Gly)n for four different length peptides over a wide range of temperatures. We observe a sharp transition in the number of hydrogen bonds between peptide and water and in the number of water molecules within the first hydration shell as temperature rises; this is used to locate the transition temperature. The dependence of the transition temperatures of ELPs on their lengths agrees well with experiments in that both have the same power law exponents. Our simulations reveal that the tendency for pentamers (VPGVG) in ELPs of all lengths to lose H-bonds with water or to gain H-bonds with themselves as temperature rises is independent of the length of the chain in which they are embedded. Thus, the transition temperature of ELPs in pure water is determined by two factors: the hydrogen bonding tendency of the pentamers and the number of pentamers per ELP. Moreover, the hydrogen bonding tendency of pentamers depends only on their sequences, not on the ELP chain length.
The construction of multilength scaled hierarchical nanostructures from diverse natural components is critical in the progress toward all-natural nanocomposites with structural robustness and ...versatile added functionalities. Here, we report a spontaneous formation of peculiar “shish kebab” nanostructures with the periodic arrangement of silk fibroin domains along straight segments of cellulose nanofibers. We suggest that the formation of these shish kebab nanostructures is facilitated by the preferential organization of heterogeneous (β-sheets and amorphous silk) domains along the cellulose nanofiber driven by modulated axial distribution of crystalline planes, hydrogen bonding, and hydrophobic interactions as suggested by all-atom molecular dynamic simulations. Such shish kebab nanostructures enable the ultrathin membrane to possess open, transparent, mechanically robust interlocked networks with high mechanical performance with up to 30 GPa in stiffness and 260 MPa in strength. These nanoporous robust membranes allow for the extremely high water flux, up to 3.5 × 104 L h–1 m–2 bar–1 combined with high rejection rate for various organic molecules, capability of capturing heavy metal ions and their further reduction into metal nanoparticles for added SERS detection capability and catalytic functionalities.
We synthesized long, nucleobase-modified, single-stranded DNA (ssDNA) using terminal deoxynucleotidyl transferase (TdT) enzymatic polymerization. Specifically, we investigated the effect of unnatural ...nucleobase size and incorporation density on ssDNA resistance to exo- and endonuclease degradation. We discovered that increasing the size and density of unnatural nucleobases enhances ssDNA resistance to degradation in the presence of exonuclease I, DNase I, and human serum. We also studied the mechanism of this resistance enhancement using molecular dynamics simulations. Our results show that the presence of unnatural nucleobases in ssDNA decreases local chain flexibility and hampers nuclease access to the ssDNA backbone, which hinders nuclease binding to ssDNA and slows its degradation. Our discoveries suggest that incorporating nucleobase-modified nucleotides into ssDNA, using enzymatic polymerization, is an easy and efficient strategy to prolong and tune the half-life of DNA-based materials in nucleases-containing environments.
Tertiary model of a plant cellulose synthase Sethaphong, Latsavongsakda; Haigler, Candace H.; Kubicki, James D. ...
Proceedings of the National Academy of Sciences - PNAS,
04/2013, Letnik:
110, Številka:
18
Journal Article
Recenzirano
Odprti dostop
A 3D atomistic model of a plant cellulose synthase (CESA) has remained elusive despite over forty years of experimental effort. Here, we report a computationally predicted 3D structure of 506 amino ...acids of cotton CESA within the cytosolic region. Comparison of the predicted plant CESA structure with the solved structure of a bacterial cellulose-synthesizing protein validates the overall fold of the modeled glycosyltransferase (GT) domain. The coaligned plant and bacterial GT domains share a six-stranded β-sheet, five α-helices, and conserved motifs similar to those required for catalysis in other GT-2 glycosyltransferases. Extending beyond the cross-kingdom similarities related to cellulose polymerization, the predicted structure of cotton CESA reveals that plant-specific modules (plant-conserved region and class-specific region) fold into distinct subdomains on the periphery of the catalytic region. Computational results support the importance of the plant-conserved region and/or class-specific region in CESA oligomerization to form the multimeric cellulose–synthesis complexes that are characteristic of plants. Relatively high sequence conservation between plant CESAs allowed mapping of known mutations and two previously undescribed mutations that perturb cellulose synthesis in Arabidopsis thaliana to their analogous positions in the modeled structure. Most of these mutation sites are near the predicted catalytic region, and the confluence of other mutation sites supports the existence of previously undefined functional nodes within the catalytic core of CESA. Overall, the predicted tertiary structure provides a platform for the biochemical engineering of plant CESAs.
Vibrational sum frequency generation (SFG) spectroscopy has been extensively used for obtaining structural information of molecular functional groups at two-dimensional (2D) interfaces buried in the ...gas or liquid medium. Although the SFG experiment can be done elegantly, interpreting the measured intensity in terms of molecular orientation with respect to the lab coordinate is quite complicated. One of the main reasons is the difficulty of determining the hyperpolarizability tensors of even simple molecules that govern their SFG responses. The single-bond polarizability derivative model has been proposed to estimate the relative magnitude of SFG-active hyperpolarizability by assuming that the perturbation associated to each vibration is negligible. In this study, density functional theory was used to calculate the polarizability and dipole derivative tensors of the CH3 stretch mode of CH3I, CH3CH2I, CH3OH, and CH3CH2OH. Then, the hyperpolarizability tensors of symmetric and asymmetric vibration modes were calculated considering the Boltzmann distribution of representative conformers, which allowed us to theoretically calculate their SFG intensities at all polarization combinations as a function of the tilt angle of the CH3 group with respect to the surface normal direction. Then, the ratios of the calculated SFG intensities for the CH3 symmetric and asymmetric stretch peaks used in experimental studies for the CH3 tilt angle determination were compared. This comparison clearly showed that the effect of vibrational coupling among neighboring functional groups is significant and cannot be assumed to be negligible. This study presents new parameters that can be used in determining the average tilt angle of the CH3 group at the 2D interface with SFG measurements as well as limitations of the method.
PDF
