While the theory of estimation of monocomponent polynomial phase signals is well established, the theoretical and methodical treatment of multicomponent polynomial phase signals (mc-PPSs) is limited. ...In this paper, we investigate several aspects of parameter estimation for mc-PPSs and derive the Crameacuter-Rao bound. We show the limits of existing techniques and then propose a nonlinear least squares (NLS) approach. We also motivate the use the Nelder-Mead simplex algorithm for minimizing the nonlinear cost function. The slight increase in computational complexity is a tradeoff for improved mean square error performance, which is evidenced by simulation results
In real practice, to assess concrete strength in structures, engineers usually use non-destructive tests (NDT) (e.g. rebound hammer or ultrasonic pulse velocity) in addition to destructive tests (DT) ...that are carried out on cores extracted from the structure. The results of these tests (NDT and DT) are used to identify a relationship (a conversion model) between the non-destructive measured features and the concrete strength. This model can be then used to assess the strength at any location within the structure under consideration, as well as the mean strength and the strength standard deviation (strength variability). In fact, the assessment of concrete strength variability is as important as the mean strength since the mean strength alone cannot provide a clear picture about the concrete under investigation. However, due to the presence of many uncertainties, the reliability of the values estimated by NDTs need to be improved. In the present study, a wide range of concretes having mean strengths of 10–50 MPa and concrete strength variabilities of 10–30% (defined by the coefficient of variation) is analysed. The main target of this paper is to analyse how would the reliability of assessing the concrete strength variability changes if the bi-objective method is used as a model identification approach and the conditional coring concept is applied for selecting core locations. Results are analysed in terms of the minimum number of cores NC that corresponds to a specific uncertainty level, concrete characteristics, and quality of NDT measurements. The results show an important improvement in the reliability of assessing the strength variability when both the bi-objective method and conditional coring are applied together.
A precise model of the array response is required to maintain the performance of direction-of-arrival (DOA) estimation. When modeling errors are present or the sensor environment is time-varying, ...autocalibration becomes necessary. In this paper, the problem of phase autocalibration for uniform rectangular array (URA) geometries is considered. For the case with a single source, a simple and robust least-squares algorithm for joint 2-D DOA estimation and phase calibration is presented. When performing phase autocalibration with a URA, the phase and DOA parameters cannot be identified together without ambiguity. This problem is discussed and a suitable remedy is suggested. An approximate Cramér-Rao bound and analytical expressions for the mean squared error performance of the proposed estimator are presented. The proposed algorithm for phase autocalibration is extended for the case with multiple sources. The results are evaluated using a representative body of simulations.
In this work, polycrystalline aluminum doped zinc oxide (ZnO:Al) films with c-axis (002) orientation have been grown on glass and silicon substrates by RF (radio frequency) magnetron sputtering ...technique, at room temperature. A systematic study of the effect of sputtering deposition parameters (i.e. RF power and argon gas pressure) on the structural, optical and electrical properties of the films was carried out. We observed that, with increasing RF power the growth rate increased, while it decreased with increasing gas pressure. As mentioned above, the films were polycrystalline in nature with a strong preferred (002) orientation. The intrinsic compressive stress was found to decrease with both increasing RF power and gas pressure, and near stress-free film was obtained at 200
W RF power and 2
×
10
−
1
Pa gas pressure. The obtained ZnO:Al films, not only have an average transmittance greater than 90% in the visible region, but also have an optical band gap between 3.33 and 3.47
eV depending on the sputtering parameters. Moreover, a low value of the electrical resistivity (~
1.25
×
10
−
3
Ω
cm) was obtained for the film deposited at 200
W and 2
×
10
−
3
mbar.
We consider time-of-arrival based robust geolocation in harsh line-of-sight/non-line-of-sight environments. Herein, we assume the probability density function (PDF) of the measurement error to be ...completely unknown and develop an iterative algorithm for robust position estimation. The iterative algorithm alternates between a PDF estimation step, which approximates the exact measurement error PDF (albeit unknown) under the current parameter estimate via adaptive kernel density estimation, and a parameter estimation step, which resolves a position estimate from the approximate log-likelihood function via a quasi-Newton method. Unless the convergence condition is satisfied, the resolved position estimate is then used to refine the PDF estimation in the next iteration. We also present the best achievable geolocation accuracy in terms of the Cramér-Rao lower bound. Various simulations have been conducted in both real-world and simulated scenarios. When the number of received range measurements is large, the new proposed position estimator attains the performance of the maximum likelihood estimator (MLE). When the number of range measurements is small, it deviates from the MLE, but still outperforms several salient robust estimators in terms of geolocation accuracy, which comes at the cost of higher computational complexity.
Quad-module characterization with the MALTA monolithic pixel chip Dachs, F.; Zoubir, A.M.; Sharma, A. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
07/2024, Letnik:
1064
Journal Article
Recenzirano
The MALTA silicon pixel detector combines a depleted monolithic active pixel sensor (DMAPS) with a fully asynchronous front-end and readout. It features a high granularity pixel matrix with a 36.4 μm ...symmetric pixel pitch, low power consumption of <1 μW/pixel and low material budget with detector thicknesses as little as 50 μm. It achieves a radiation hardness to 100MRad TID and more than 1 × 10E15 1 MeV neq/cm2 with a time resolution of <2 ns (Pernegger et al., 2023).
In order to cover large sensitive areas efficiently with a minimum of power and data connections the development of modules, comprising of up to 4 MALTA detectors, is studied.
This contribution presents the beam test performance of parallel and serial powered MALTA 4-chip modules in an effort to characterize the sensor’s chip-to-chip data and power transmission and prepare the production of a first prototype of an ultra-light weight 4-chip module on a flexible circuit with next generation MALTA2 sensors.
MALTA2 is a depleted monolithic active pixel sensor (DMAPS) developed in the Tower 180 nm CMOS imaging process. Monolithic CMOS sensors offer advantages over current hybrid imaging sensors both in ...terms of increased tracking performance due to lower material budget but also in terms of ease of integration and construction costs due to the monolithic design. Current research and development efforts are aimed towards radiation-hard designs up to 100 Mrad in Total Ionizing Dose and 3×1015 1 MeV neq/cm2 in Non-Ionizing Energy Loss. One important property of a sensor’s radiation hardness is the depletion depth at which efficient charge collection is achieved via drift movement. Grazing angle test-beam data was taken during the 2023 SPS CERN test beam with the MALTA telescope and Edge Transient Current Technique studies were performed at DESY in order to develop a quantitative study of the depletion depth for un-irradiated, epitaxial MALTA2 samples. The study is planned to be extended for irradiated and Czochralski MALTA2 samples.
MALTA is a depleted monolithic active pixel sensor (DMAPS) developed in the Tower Semiconductor 180-nm CMOS imaging process. Monolithic CMOS sensors offer advantages over current hybrid imaging ...sensors in terms of both increased tracking performance due to lower material budget and ease of integration and construction costs due to the integration of read-out and active sensor into one ASIC. Current research and development efforts are aimed toward radiation hard designs up to 100 Mrad in total ionizing dose (TID) and <inline-formula> <tex-math notation="LaTeX">1\,\, \times 10 ^{15}~1~\text {MeV}\text {n}_{\text {eq}}/\text {cm}^{2} </tex-math></inline-formula> in nonionizing energy loss (NIEL). The design of the MALTA sensors was specifically chosen to achieve radiation hardness up to these requirements and satisfy current and future collider constraints. The current MALTA pixel architecture uses small electrodes which provide less noise, higher signal voltage, and a better power-to-performance ratio. To counteract the loss of efficiency in pixel corners, modifications to the Tower process have been implemented. The MALTA sensors have been tested during the 2021 and 2022 SPS CERN Test Beam in the MALTA telescope. The telescope ran for the whole duration of the beam time and took data to characterize the novel MALTA2 variant and the performance of irradiated samples in terms of efficiency and cluster size. These campaigns show that MALTA is an interesting prospect for HL-LHC and beyond collider experiments, providing both very good tracking capabilities and radiation hardness in harsh radiation environments.
This recommendation is written to improve the assessment of the in situ. Compressive strength of concrete in existing structures by combining core strength values and non-destructive measurements. ...Both average strength and its scatter are considered. Deriving a characteristic strength from the assessment results is not considered here. The recommendation applies for most common techniques (ultrasonic pulse velocity, rebound hammer, pull-out) but also for less common techniques (penetration test, etc.). The recommendation does not apply to situations in which no core has been taken from the existing structure and is limited to situations where NDT is combined with cores. The recommendation introduces the concept of Estimation Quality Level, corresponding to the target of assessment, and which is put in relation with the means and strategy developed for assessing concrete. The text details all steps that must be followed from the data gathering to the checking of the quality of the final estimations. For more clarity, an illustrative example is described for each step of the assessment process.
We investigate the problem of enumerating source signals impinging on an array of sensors in an information theoretic framework. The conventional Bayesian information criterion (BIC) does not yield ...satisfactory performance for this problem because it only considers the density of the observations. In order to remedy the limitations of the BIC, we propose a generalized Bayesian information criterion (GBIC) rule by incorporating the density of the sample eigenvalues or corresponding statistics. Such a density contains extra information and complements the density of the observations in constructing the GBIC. As a result, two different expressions for the GBIC are suggested. Simulation results validate the superiority of the proposed GBIC over the conventional BIC in terms of correctly determining the number of sources while their computational costs are comparable.