Nano-sized Fe3O4 and Fe2O3 were synthesized using a precipitation method. The nanomaterials were tested as adsorbents for the removal of both Cu2+ and Pb2+ ions. The nanomaterials were characterized ...using X-ray powder diffraction to determine both the phase and the average grain size of the synthesized nanomaterials. Batch pH studies were performed to determine the optimum binding pH for both the Cu2+ and Pb2+ to the synthesized nanomaterials. The optimum binding was observed to occur at pH4 and above. Time dependency studies for Cu2+ and Pb2+ showed the binding occurred within the first 5min of contact and remained constant up to 2h of contact. Isotherm studies were utilized to determine the binding capacity of each of the nanomaterials for Cu2+ and Pb2+. The binding capacity of Fe3O4 with Cu2+ and Pb2+ was 37.04mg/g and 166.67mg/g, respectively. The binding capacities of the Fe2O3 nanomaterials with Cu2+ and Pb2+ were determined to be 19.61mg/g and 47.62mg/g, respectively. In addition, interference studies showed no significant reduction in the binding of either Cu2+ or Pb2+ to the Fe3O4 or Fe2O3 nanomaterials in the presence of solutions containing the individual ions Na+, K+, Mg2+ and Ca2+ or a solution consisting of a combination of all the aforementioned cations in one solution.
•Non-stabilized iron oxide nanoparticles were synthesized from 12 to 20nm in size.•Effects of pH, time, and interfering ions were investigated for low level Cu2+ and Pb2+ removal.•Pb2+ had higher binding capacity to the Fe3O4 nanomaterial.•Cu2+ had higher binding capacity and Fe2O3 nanomaterial.•Both Cu2+ and Pb2+ binding followed the Langmuir isotherm model.
Anemones, specifically the species Anemonia sulcata, are cnidarians that serve as bioindicators in marine ecosystems, indicating the health of the environment and changes in environmental conditions. ...Monitoring anemone populations and studying their well-being and distribution provide valuable insights into marine ecosystem conditions. This study aimed to investigate the impact of the SARS-CoV-2 pandemic on the metal content of Anemonia sulcata. Over a six-year period (2017–2022), twenty specimens of Anemonia sulcata were collected in Tenerife, Spain. The results showed that in 2020, during the two-month lockdown in Spain from March to May when tourism was halted, A. sulcata exhibited the lowest concentrations of various metals studied (Al, Cd, Cu, Fe, Pb, and Zn). This finding suggests that the reduced anthropogenic pressure on the coast due to the absence of tourism significantly decreased pollution levels. Therefore, the study emphasizes the importance of promoting sustainable tourism worldwide. The research highlights that minimizing human impact on coastal areas through responsible tourism practices can effectively reduce pollution in marine ecosystems.
Display omitted
•A total 120 A. sulcata anemone captured over a period of six years (2017–2022).•Metal concentrations in A. sulcata were lowest just after the pandemic.•Metal contamination in A. sulcata increased after lockdown.
Display omitted
•Microextraction using DLLME was optimized by factorial design and Doehlert matrix.•Satisfactory recovery values were obtained in surface water samples.•The optimized method provided ...limits of detection between 0.55 and 0.85 μg L-1.•The developed methodology was applied for the analysis of metals in natural and drinking water samples.
In this work, a dispersive liquid–liquid microextraction method combined with inductively coupled plasma optical emission spectrometry was developed to extract and pre-concentrate the trace metals cadmium and lead. Variables such as extracting solvent, dispersive solvent and chelating agent were studied using a univariate design. On the other hand, parameters such as pH, volume of the extracting solvent, volume of the dispersive solvent and concentration of the chelating agent were optimized using a factorial design 24. Doehlert design was used to improve the conditions established in the factorial design. The optimized method consisted of chelating agent concentration of 0.05 % (w/v), 8000 µL of dispersive solvent (ethanol), 600 µL of extracting solvent (chlorobenzene) and a pH of 7.0. Using these conditions, it was obtained a limit of detection of 0.85 and 0.55 µg L-1, enrichment factors of 13.4 and 10 and relative standard deviation of 0.8 and 3.7 % (5 µg L-1, n = 3) for the metals Cd and Pb, respectively. The developed methodology was applied for the analysis of cadmium and lead in natural and drinking water samples.
The pharmacokinetics in patients dosed with the nanoparticle-based MRI contrast agent SN132D is explained by a size dependent clearance mechanism and this behavior was modeled numerically. Blood ...samples from 14 patients were analyzed for silicon (a component of the nanoparticle) by ICP-OES. The pharmacokinetic model has only one free parameter and relies on a measured size distribution of the contrast agent and well-established properties of the renal and cardiovascular systems. The model fits well (R2 = 0.9910) with experimental data from samples taken from ten minutes to two weeks after start of infusion. These results support that the cut-off diameter for human renal filtration is 5.5 nm. The agreement between experiment and model implies that there is little or no plasma protein binding to the nanoparticles.
The pharmacokinetics of the nanoparticle-based MRI contrast agent SN132D in patients is explained by a size dependent clearance mechanism and this behavior was modeled numerically. The model has only one free parameter and relies on a measured size distribution of the contrast agent and well-established properties of the renal physiology and the cardiovascular system. The model fits well (R2 = 0.9910) with experimental data from samples taken from ten minutes to two weeks after start of infusion. Display omitted
Display omitted
The primary objectives of the project are the synthesis of new families of heterocyclic compounds based on 8-hydroxyquinolinenamely: 5-((2-bromoethoxy) methyl) quinolin-8-ol (QC2-Br) ...and 5-((3-bromopropoxy) methyl) quinolin-8-ol (QC3-Br) and their evaluations as inhibitors of acid corrosion (1.0 M HCl).The synthesis of this series of compounds was carried out by a very simple and effective method, but with very good yield and with very good solubility in common organic solvents.The characterization of these new compounds carried out by infrared (FT-IR), nuclear magnetic resonance (1H and 13C NMR) and elementary analysis (EA).The anticorrosion activity was evaluated by gravimetric (WL), electrochemical methods (PDP and EIS) and theoretical studies (DFT, MC and MD). The inhibitors studied adsorbed on the metal surface according to Langmuir isotherm and act on the metal surface as inhibitors mixed type. The thermodynamic parameters show that the two inhibitors adsorb on the metal surface by chemical bonds (chemisorptions).A CPE, Q determined by fit and graphical methods plotted by synthetic data, was utilized.The statistical studies were carried out to confirm the gravimetric tests.Gravimetric solutions were analyzed by Inductively Coupled Plasma-Optical Spectroscopy (ICP-OES) and UV-visible spectrometry (UV-vis). The surface morphology was characterized by Scanning electronic spectroscopy (SEM) coupled with energy dispersive spectroscopy (EDS) and Infrared spectroscopy (FT-IR).The analysis of gravimetric solutions by ICP-OES and UV-visible show that the two inhibitors capable of making chemical bonds with ferric ions and decrease the dissolution of iron in the corrosive solution.The theoretical, experimental results and surface characterization methods show that the two compounds have a good inhibitor of acid corrosion and the inhibitory efficacy exceeds 96% for the two compounds at a concentration of 1 mM.
Two shape-persistent covalent cages (CC1 r and CC2 r ) have been devised from triphenyl amine-based trialdehydes and cyclohexane diamine building blocks utilizing the dynamic imine chemistry followed ...by imine bond reduction. The cage compounds have been characterized by several spectroscopic techniques which suggest that CC1 r and CC2 r are 2+3 and 8+12 self-assembled architectures, respectively. These state-of-the-art molecules have a porous interior and stable aromatic backbone with multiple palladium binding sites to engineer the controlled synthesis and stabilization of ultrafine palladium nanoparticles (PdNPs). As-synthesized cage-embedded PdNPs have been characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and powder X-ray diffraction (PXRD). Inductively coupled plasma optical emission spectrometry reveals that Pd@CC1 r and Pd@CC2 r have 40 and 25 wt% palladium loading, respectively. On the basis of TEM analysis, it has been estimated that as small as ∼1.8 nm PdNPs could be stabilized inside the CC1 r , while larger CC2 r could stabilize ∼3.7 nm NPs. In contrast, reduction of palladium salts in the absence of the cages form structure less agglomerates. The well-dispersed cage-embedded NPs exhibit efficient catalytic performance in the cyanation of aryl halides under heterogeneous, additive-free condition. Moreover, these materials have excellent stability and recyclability without any agglomeration of PdNPs after several cycles.
The study conducted in June 2022 collected 120 Anemonia sulcata samples from Punta del Hidalgo, Tenerife, Spain, focusing on areas near a sewage pipe. The samples underwent meticulous preparation, ...including tissue extraction, drying, and filtration, followed by metal concentration (Al, Cd, Cu, Fe, Li, Ni, Pb, and Zn) analysis using ICP-OES. Results showed varying metal concentrations across zones, with higher concentrations nearer to the pipe. PERMANOVA analysis revealed significant differences in metal concentrations between zones, indicating spatial variations. Environmental factors such as pipe proximity, transport contaminant, and dispersion influence on metal accumulation in A. sulcata. Previous studies corroborate these findings, highlighting the pipe's significant impact on intertidal organisms. Effective monitoring strategies combining direct organism sampling with water and sediment analysis are crucial for assessing and mitigating the environmental and ecological impacts of metal contamination. These findings underscore the necessity of ongoing monitoring efforts and management interventions to safeguard marine ecosystems from detrimental effects of anthropogenic activities such as an underwater sewage pipe.
The dissolution behavior of the Fe-Cr alloys in acidic Na2SO4 solutions was investigated using online inductively coupled plasma-optical emission spectrometry (ICP-OES). The dissolution current ...density of pure Fe measured by spectroscopic analysis shows an anodic Tafel slope of 60 mV decade–1, while the anodic Tafel slope of Fe species in Fe-Cr alloys increases to 120 mV decade–1 with increasing Cr content in the alloy, suggesting that the rate-determining step of the anodic reaction mechanism is dependent on the Cr content. The mass balance on the surface of Fe-6Cr in the active-passive transition indicated that Cr species preferentially dissolved through a salt layer formed on the alloy surface. Some oxidized products that existed in the salt layer in the active region dissolved when the surface changed to the passive state. The anodic reaction mechanism and passivation processes of Fe-Cr alloys, including pure Fe, are discussed quantitatively.
PDF
