Frequencies from 100 GHz to 3 THz are promising bands for the next generation of wireless communication systems because of the wide swaths of unused and unexplored spectrum. These frequencies also ...offer the potential for revolutionary applications that will be made possible by new thinking, and advances in devices, circuits, software, signal processing, and systems. This paper describes many of the technical challenges and opportunities for wireless communication and sensing applications above 100 GHz, and presents a number of promising discoveries, novel approaches, and recent results that will aid in the development and implementation of the sixth generation (6G) of wireless networks, and beyond. This paper shows recent regulatory and standard body rulings that are anticipating wireless products and services above 100 GHz and illustrates the viability of wireless cognition, hyper-accurate position location, sensing, and imaging. This paper also presents approaches and results that show how long distance mobile communications will be supported to above 800 GHz since the antenna gains are able to overcome air-induced attenuation, and present methods that reduce the computational complexity and simplify the signal processing used in adaptive antenna arrays, by exploiting the Special Theory of Relativity to create a cone of silence in over-sampled antenna arrays that improve performance for digital phased array antennas. Also, new results that give insights into power efficient beam steering algorithms, and new propagation and partition loss models above 100 GHz are given, and promising imaging, array processing, and position location results are presented. The implementation of spatial consistency at THz frequencies, an important component of channel modeling that considers minute changes and correlations over space, is also discussed. This paper offers the first in-depth look at the vast applications of THz wireless products and applications and provides approaches for how to reduce power and increase performance across several problem domains, giving early evidence that THz techniques are compelling and available for future wireless communications.
Data rate and energy efficiency decrement caused by the transmission of reference and data carrier signals in equal portions constitute the major drawback of differential chaos shift keying (DCSK) ...systems. To overcome this dominant drawback, a short reference DCSK system (SR-DCSK) is proposed. In SRDCSK, the number of chaotic samples that constitute the reference signal is shortened to R such that it occupies less than half of the bit duration. To build the transmitted data signal, P concatenated replicas of R are used to spread the data. This operation increases data rate and enhances energy efficiency without imposing extra complexity onto the system structure. The receiver uses its knowledge of the integers R and P to recover the data. The proposed system is analytically studied and the enhanced data rate and bit energy saving percentages are computed. Furthermore, theoretical performance for AWGN and multipath fading channels are derived and validated via simulation. In addition, optimising the length of the reference signal R is exposed to detailed discussion and analysis. Finally, the application of the proposed short reference technique to the majority of transmit reference systems such as DCSK, multicarrier DCSK, and quadratic chaos shift keying enhances the overall performance of this class of chaotic modulations and is, therefore, promising.
In this article, we develop an end-to-end wireless communication system using deep neural networks (DNNs), where DNNs are employed to perform several key functions, including encoding, decoding, ...modulation, and demodulation. However, an accurate estimation of instantaneous channel transfer function, i.e. , channel state information (CSI), is needed in order for the transmitter DNN to learn to optimize the receiver gain in decoding. This is very much a challenge since CSI varies with time and location in wireless communications and is hard to obtain when designing transceivers. We propose to use a conditional generative adversarial net (GAN) to represent channel effects and to bridge the transmitter DNN and the receiver DNN so that the gradient of the transmitter DNN can be back-propagated from the receiver DNN. In particular, a conditional GAN is employed to model the channel effects in a data-driven way, where the received signal corresponding to the pilot symbols is added as a part of the conditioning information of the GAN. To address the curse of dimensionality when the transmit symbol sequence is long, convolutional layers are utilized. From the simulation results, the proposed method is effective on additive white Gaussian noise (AWGN) channels, Rayleigh fading channels, and frequency-selective channels, which opens a new door for building data-driven DNNs for end-to-end communication systems.
In this work, we study the secrecy performance of a reconfigurable intelligent surfaces (RIS)-aided wireless communication system in the presence of an eavesdropping user. Specifically, we assume ...that the RIS is placed between the source and the legitimate user and is used to improve the link security. In particular, analytical results for the secrecy outage probability (SOP) are derived. We also provide an asymptotic analysis to investigate the effect of the main parameters on the secrecy performance of our proposed system, such as the number of tunable elements of the RIS and the average signal-to-noise ratios. Finally, we verify our analytical results via simulations. Results show the positive effect of utilizing RISs for enhancing the secrecy performance in wireless systems.
An intelligent reflecting surface (IRS) can adaptively adjust the phase shifts of its reflecting units to strengthen the desired signal and/or suppress the undesired signal. In this letter, we ...investigate an IRS-aided secure wireless communication system where a multi-antenna access point (AP) sends confidential messages to a single-antenna user in the presence of a single-antenna eavesdropper. In particular, we consider the challenging scenario where the eavesdropping channel is stronger than the legitimate communication channel and they are also highly correlated in space. We maximize the secrecy rate of the legitimate communication link by jointly designing the AP's transmit beamforming and the IRS's reflect beamforming. While the resultant optimization problem is difficult to solve, we propose an efficient algorithm to obtain high-quality suboptimal solution for it by applying the alternating optimization, and semidefinite relaxation methods. Simulation results show that the proposed design significantly improves the secrecy communication rate for the considered setup over the case without using the IRS, and outperforms a heuristic scheme.
The inter-symbol interference (ISI) caused by multipath propagation in wireless channel is one of the main reasons for high bit error rate (BER) in wireless communication system. Chaos was proved to ...be an ideal communication baseband signal because of its special properties, including the corresponding simple matched filter and multipath resistance ability. Although the ISI caused by the multipath is promised to be completely eliminated by using the optimal symbol decoding threshold, the future symbols are needed to be known for calculating the optimal threshold, which is hard to be practically implemented. To deal with such problem, an echo state network (ESN), because of its short-term memory ability, is proposed to predict the future chaotic baseband signal based on the signal received after the matched filter. Thus, the first future symbol is estimated, which is used to improve the accuracy of the decoding threshold in the chaotic baseband wireless communication system (CBWCS) in order to further relieve the effect of ISI. Compared to the sub-optimal decoding threshold considering only past symbols, the improved threshold proposed here considers not only the ISI from past symbols, but also the ISI from one future symbol. The simulation in both the static and time-varying wireless channels are performed, the results show that the BER performance of CBWCS is improved more significantly in multipath channels as compared to single path channel. The experiments based on wireless open-access research platform verify the ISI resistance performance under the practical scenarios. Both simulation and experimental results show the effectiveness and the superiority of the proposed method.
A new end-to-end communication system is proposed to increase transmission speed, robustness, and security in order to meet the requirements of mobile systems that know an exponentially increasing ...data amount over time. The design relies on the use of compressed sensing-source coding instead of the supported speech coding standards in actual mobile communication systems. The proposed compressed sensing-source coding method allows reducing the speech coding complexity by using simple quantisation and binary encoding, saving communication system resources, and encrypting communications without additional costs. The performance of the resulting communication system is evaluated for speech communication via 10 dB Rayleigh environment in terms of perceptual evaluation of speech quality (PESQ) scores and coherence speech intelligibility index (CSII) when convolutional coding, orthogonal frequency division multiplexing, and diversity schemes are used. Results report that for a bit rate of 12.8 kbit/s the proposed scheme achieves fair speech intelligibility justified by a CSII value of 0.5, and offers good output speech quality measure, providing a PESQ of 3.33 for the same bit rate.
An important ingredient of the future 5G systems will be ultra-reliable low-latency communication (URLLC). A way to offer URLLC without intervention in the baseband/PHY layer design is to use ...interface diversity and integrate multiple communication interfaces, each interface based on a different technology. In this paper, we propose to use coding to seamlessly distribute coded payload and redundancy data across multiple available communication interfaces. We formulate an optimization problem to find the payload allocation weights that maximize the reliability at specific target latency values. In order to estimate the performance in terms of latency and reliability of such an integrated communication system, we propose an analysis framework that combines traditional reliability models with technology-specific latency probability distributions. Our model is capable to account for failure correlation among interfaces/technologies. By considering different scenarios, we find that the optimized strategies can in some cases significantly outperform strategies based on k-out-of-n erasure codes, where the latter do not account for the characteristics of the different interfaces. The model has been validated through simulation and is supported by experimental results.
LPD communication has recently emerged as a new transmission technology to address privacy and security in wireless networks. Recent studies have established the fundamental limits of LPD ...communication in terms of the amount of information that can be conveyed from a transmitter to a receiver subject to a constraint on a warden's detection error probability. The established information- theoretic metric enables analytical studies on the design and performance of LPD communication under various channel conditions. In this article, we present the key features of LPD communication and discuss various important design considerations. First, we clarify the differences between LPD communication and well-known physical-layer security. Then, from an information-theoretic point of view, we discuss the optimal signaling strategies for transmitting the message-carrying signal and artificial noise signal for LPD communication. Finally, we identify the key challenges in the design of practical LPD communication systems and point out future research directions in this context. This article provides guidelines for designing practical LPD communication strategies in wireless systems and networks.