We report dissipative magnon-photon coupling caused by the cavity Lenz effect, where the magnons in a magnet induce a rf current in the cavity, leading to a cavity backaction that impedes the ...magnetization dynamics. This effect is revealed in our experiment as level attraction with a coalescence of hybridized magnon-photon modes, which is distinctly different from level repulsion with mode anticrossing caused by coherent magnon-photon coupling. We develop a method to control the interpolation of coherent and dissipative magnon-photon coupling, and observe a matching condition where the two effects cancel. Our work sheds light on the so-far hidden side of magnon-photon coupling, opening a new avenue for controlling and utilizing light-matter interactions.
•Evaluation of the EDC in the MILD regime.•Influence of the non-unity reacting fraction of the fine structures.•Including the variable reacting fraction remedies most of the claimed ...discrepancies.•MILD combustion modelling in Jet-in-Hot-Coflow.•Discussion on the EDC constants modifications found in literature.
Performance of the Eddy Dissipation Concept (EDC) in the regime of Moderate and Intense Low-oxygen Dilution (MILD) combustion is investigated. The special MILD features, where chemical and turbulence time scales are comparable (Damköhler number close to unity), have led several researchers to suggest modifications of EDC, mainly by changing model constants. EDC with standard and modified constants are compared, and the importance of each effect is outlined. Different fine-structure reactor models and their inflow/initial conditions are discussed and found to play a significant role. The reacting fraction of fine structures, which in virtually all other numerical studies is set to unity, is also discussed and found to be important. We observe better agreement with experiment when the reacting fraction is reduced below unity, which is also described by the original EDC. The results obtained with the variable reacting fraction are found to improve both the temperature distributions and the lift-off height predictions. The calculations are carried out with the use of open source software OpenFOAM. The main test case was the Delft Jet-in-Hot-Coflow burner emulating MILD regime at three different flow conditions (jet Reynolds numbers of 2500, 4100 and 8800).
LES for industrial applications with complex geometries is mostly characterised by: a) a finite volume CFD method using a non-staggered arrangement of the flow variables and second order accurate ...spatial and temporal discretisation schemes, b) an implicit top-hat filter, where the filter length is equal to the local computational cell size, and c) eddy-viscosity type LES models. LES based on these three main characteristics is indicated as industrial LES in this paper.
It becomes increasingly clear that the numerical dissipation in CFD codes typically used in industrial applications with complex geometries may inhibit the predictive capabilities of explicit LES. Therefore, there is a need to quantify the numerical dissipation rate in such CFD codes. In this paper, we quantify the numerical dissipation rate in physical space based on an analysis of the transport equation for the mean turbulent kinetic energy. Using this method, we quantify the numerical dissipation rate in a quasi-Direct Numerical Simulation (DNS) and in under-resolved DNS of, as a basic demonstration case, fully-developed turbulent channel flow. With quasi-DNS, we indicate a DNS performed using a second order accurate finite volume method typically used in industrial applications. Furthermore, we determine and explain the trends in the performance of industrial LES for fully-developed turbulent channel flow for four different Reynolds numbers for three different LES mesh resolutions. The presented explanation of the mechanisms behind the observed trends is based on an analysis of the turbulent kinetic energy budgets.
The presented quantitative analyses demonstrate that the numerical errors in the industrial LES computations of the considered turbulent channel flows result in a net numerical dissipation rate which is larger than the subgrid-scale dissipation rate.
No new computational methods are presented in this paper. Instead, the main new elements in this paper are our detailed quantification method for the numerical dissipation rate, the application of this method to a quasi-DNS and under-resolved DNS of fully-developed turbulent channel flow, and the explanation of the effects of the numerical dissipation on the observed trends in the performance of industrial LES for fully-developed turbulent channel flows.
•New quantification method for the numerical dissipation rate based on a physical space representation that can be applied to complex geometries.•Application of this method to a quasi-DNS and LES of fully-developed turbulent channel flow.•Explanation of the consequences of the numerical dissipation rate on the observed trends in the performance of the applied LES method.
In reservoir simulation, solution of the coupled systems of nonlinear algebraic equations that are associated with fully-implicit (backward Euler) discretization is challenging. Having a robust and ...efficient nonlinear solver is necessary in order for reservoir simulation to serve as the primary tool for managing the recovery processes of large-scale reservoirs. However, there are several outstanding challenges that are intimately connected to the highly nonlinear nature of the problem. Given a set of sources and sinks, the variation in the total velocity can span many orders of magnitude due to extreme contrasts in the permeability field in large-scale subsurface porous formations. Moreover, multiple and complex saturation fronts must be properly resolved throughout the three-dimensional reservoir model of interest. Add to that numerical simulation studies entail making field-scale predictions over many decades, and the challenge of developing robust and efficient nonlinear solvers across a very wide parameter space becomes clear. Here, we develop a continuation method based on the use of a dissipation operator. We focus on nonlinear two-phase flow and transport in heterogeneous formations in the presence of viscous, gravitational, and capillary forces. The homotopy is constructed by adding numerical dissipation to the coupled discrete conservation equations. A continuation parameter is introduced to control the amount of dissipation. Numerical evidence of multi-dimensional models and detailed analysis of single-cell problems are used to explain how the dissipation operator improves the nonlinear convergence of the coupled system of equations. An adaptive strategy to determine the dissipation coefficient is proposed. The dissipation level is computed locally for each cell interface. We demonstrate the efficiency of the dissipation-based continuation (DBC) nonlinear solver using several examples, including 1D scalar transport and 2D heterogeneous problems with fully-coupled flow and transport. The DBC solver has better convergence properties compared with the standard damped-Newton solvers used in reservoir simulation.
•Develop a continuation method based on dissipation operator.•Numerical evidences and detailed analysis are provided.•An adaptive strategy to determine the optimum dissipation coefficient.•The new solver exhibits superior convergence properties.•The new solver works robustly without parameter tuning.
Abstract
Energy-dissipation elastomers relying on their viscoelastic behavior of chain segments in the glass transition region can effectively suppress vibrations and noises in various fields, yet ...the operating frequency of those elastomers is difficult to control precisely and its range is narrow. Here, we report a synergistic strategy for constructing polymer-fluid-gels that provide controllable ultrahigh energy dissipation over a broad frequency range, which is difficult by traditional means. This is realized by precisely tailoring the relaxation of confined polymer fluids in the elastic networks. The symbiosis of this combination involves: elastic networks forming an elastic matrix that displays reversible deformation and polymer fluids reptating back and forth to dissipate mechanical energy. Using prototypical poly (n-butyl acrylate) elastomers, we demonstrate that the polymer-fluid-gels exhibit a controllable ultrahigh energy-dissipation property (loss factor larger than 0.5) with a broad frequency range (10
−2
~ 10
8
Hz). Energy absorption of the polymer-fluid-gels is over 200 times higher than that of commercial damping materials under the same dynamic stress. Moreover, their modulus is quasi-stable in the operating frequency range.
Widespread applications of magnetic devices require an efficient means to manipulate the local magnetization. One mechanism is the electrical spin-transfer torque associated with electron-mediated ...spin currents; however, this suffers from substantial energy dissipation caused by Joule heating. We experimentally demonstrated an alternative approach based on magnon currents and achieved magnon-torque-induced magnetization switching in Bi
Se
/antiferromagnetic insulator NiO/ferromagnet devices at room temperature. The magnon currents carry spin angular momentum efficiently without involving moving electrons through a 25-nanometer-thick NiO layer. The magnon torque is sufficient to control the magnetization, which is comparable with previously observed electrical spin torque ratios. This research, which is relevant to the energy-efficient control of spintronic devices, will invigorate magnon-based memory and logic devices.
Electrical manipulation of skyrmions attracts considerable attention for its rich physics and promising applications. To date, such a manipulation is realized mainly via spin-polarized current based ...on spin-transfer torque or spin-orbital torque effect. However, this scheme is energy consuming and may produce massive Joule heating. To reduce energy dissipation and risk of heightened temperatures of skyrmion-based devices, an effective solution is to use electric field instead of current as stimulus. Here, we realize an electric-field manipulation of skyrmions in a nanostructured ferromagnetic/ferroelectrical heterostructure at room temperature via an inverse magneto-mechanical effect. Intriguingly, such a manipulation is non-volatile and exhibits a multistate feature. Numerical simulations indicate that the electric-field manipulation of skyrmions originates from strain-mediated modification of effective magnetic anisotropy and Dzyaloshinskii-Moriya interaction. Our results open a direction for constructing low-energy-dissipation, non-volatile, and multistate skyrmion-based spintronic devices.
PDF
