Chain polymerizations are defined as chain reactions where the propagation steps occur by reaction between monomer(s) and active site(s) on the polymer chains with regeneration of the active site(s) ...at each step. Many forms of chain polymerization can be distinguished according to the mechanism of the propagation step (e.g., cyclopolymerization – when rings are formed, condensative chain polymerization – when propagation is a condensation reaction, group-transfer polymerization, polyinsertion, ring-opening polymerization – when rings are opened), whether they involve a termination step or not (e.g., living polymerization – when termination is absent, reversible-deactivation polymerization), whether a transfer step is involved (e.g., degenerative-transfer polymerization), and the type of chain carrier or active site (e.g., radical, ion, electrophile, nucleophile, coordination complex). The objective of this document is to provide a language for describing chain polymerizations that is both readily understandable and self-consistent, and which covers recent developments in this rapidly evolving field.
The isoselective ring-opening polymerization of rac-LA is a challenging goal. In this work, a series of potassium amidate complexes (K1-K10) were easily prepared and characterized using the ...sup.1H/sup.13C NMR spectrum. The molecular structures of potassium complexes K2 and K10 were determined by X-ray diffraction, which showed that both were two-dimensional coordination polymers due to the adjacent π interactions of the aryl. In the presence of benzyl alcohol (BnOH), all of the potassium complexes exhibited a high catalytic activity toward the ring-opening polymerization of L-lactide and rac-LA, yielding linear polylactides capped with BnO or CHsub.3O end groups. A significant solvent effect on the ROP of the L-LA was observed, with a superior efficiency in toluene than in THF and CHsub.2Clsub.2. These complexes are iso-selective and act as active catalysts for the controlled ring-opening polymerization of rac-lactide, with a Psub.m from 0.54 to 0.76. This is a rare example of simple alkali metal complexes for the isoselective ROP of rac-lactide. The substituent greatly affected the monomer conversion and isoselectivities.
Polycaprolactone is a biodegradable, biocompatible, and versatile polymer commonly used in the pharmaceutical and biomedical industry and the development of new catalysts that allow for the synthesis ...under milder reaction conditions and in shorter reaction times is an appealing alternative. The iron-containing imidazolium-based ionic liquid 1-n-butyl-3-methylimidazolium heptachlorodiferrate was able to efficiently catalyze the ring-opening polymerization of epsilon-caprolactone under mild reaction conditions. Polymerization yields higher than 80% were obtained after 4 h of reaction at temperatures up to 85 °C, using low ionic liquid:epsilon-caprolactone molar ratios (1:720 - 1:1500), in the absence of solvent and without an intentionally added alcohol as an initiator. Semi-crystalline polycaprolactones, with molecular weights up to 14 kDa and narrow molecular weight distributions were synthesized. The chemical structure of the polymer was confirmed by Nuclear Magnetic Resonance (.sup.1H NMR) and Fourier Transform Infrared (FTIR) spectroscopy, and its crystalline content was estimated from the enthalpy of melting of the differential scanning calorimetry (DSC) thermogram. Finally, a caprolactone-activated ROP mechanism mediated by the ionic liquid was suggested.
The development of chemically recyclable polymers promises a closed‐loop approach towards a circular plastic economy but still faces challenges in structure/property diversity and depolymerization ...selectivity. Here we report the first successful coordination ring‐opening polymerization of 4,5‐trans‐cyclohexyl‐fused γ‐butyrolactone (M1) with lanthanide catalysts at room temperature, producing P(M1) with Mn up to 89 kg mol−1, high thermal stability, and a linear or cyclic topology. The same catalyst also catalyses selective depolymerization of P(M1) back to M1 exclusively at 120 °C. This coordination polymerization is also living, enabling the synthesis of well‐defined block copolymer.
Living and reborn: Metal‐mediated coordination polymerization of a trans‐fused six‐five bicyclic lactone is living or catalytic, creating linear or cyclic polymers with high thermal stability and complete chemical recyclability.
This article presents the recent developments of radical dispersion polymerizaton controlled by reversible addition fragmentation chain transfer (RAFT) for the production of block copolymer ...particles of various morphologies, such as core‐shell spheres, worms, or vesicles. It is not meant to be an exhaustive review but it rather provides guidelines for non‐specialists. The article is subdivided into eight sections. After a general introduction, the mechanism of polymerization‐induced self‐assembly (PISA) through RAFT‐mediated dispersion polymerization is presented and the different parameters that control the morphology produced are discussed. The next two sections are devoted to the choice of the monomer/solvent pair and the macroRAFT agent. Afterwards, post‐polymerization morphological order‐to‐order transitions (i.e. morphological transitions triggered by extrinsic stimuli) or order‐to‐disorder transitions (i.e. disassembly of chains) are discussed. Assemblies based on more complex polymer architectures, such as triblock copolymers, are presented next, and finally the possibility to stabilize these structures by crosslinking is reported. The manuscript ends with a short conclusion and an outlook.
RAFT dispersion polymerization is a versatile and efficient tool to prepare core‐shell particles of various morphologies by polymerization‐induced self‐assembly. This article reviews recent developments in this field, critically comments on them, and gives an outlook on further expected developments. It provides guidelines for non‐experts by highlighting important aspects that must carefully be considered when planning the preparation of core‐shell nanoobjects using this approach.
Over the past several years, organocatalyzed polymerization reactions have attracted considerable attention, and these efforts have led to major advances. A large number of organic compounds have ...been proven active for the polymerization of a large variety of monomers. In particular, phosphazene bases (PBs) are a family of extremely strong, non‐nucleophilic, and uncharged auxiliary bases, and have shown their remarkable potential as organocatalysts for the ring‐opening polymerization (ROP) of cyclic monomers. By deprotonation of weak acids or in combination with lithium cation, PBs significantly enhance the nucleophilicity of the initiator/chain‐end, thus allowing fast and usually controlled anionic polymerization. In this feature article, the recent advances in phosphazene‐catalyzed ROP of cyclic esters are summarized. This review is divided into three sections, including general features, design and synthesis, and catalytic applications. It aims to provide a critical analysis of PB‐mediated ROP systems and a useful guide for the further design of organocatalysts applied to polymer synthesis. An outlook is given at the end.
Phosphazene bases (PBs) are a family of extremely strong and non‐nucleophilic bases having remarkable potential as organocatalysts for different types of polymerization reactions. This feature article emphasizes the general features and synthetic methods of PBs and focuses on their applications in the ring‐opening polymerization of cyclic ester monomers.
Highly regulated gamma-Fe.sub.2O.sub.3/(SiO.sub.2).sub.x-SO.sub.3H/polypyrrole (FS.sub.xHP) composite core/shell/shell microspheres are successfully prepared through a SiO.sub.2 sol-gel process and ...an in situ polymerization of pyrrole monomers. gamma-Fe.sub.2O.sub.3 functions as the "core," whereas SiO.sub.2 and polypyrrole (PPy) act as the "shells" of the composite. In contrast to many previously reported FS.sub.2H-P and PPy-based composites, the FS.sub.xHP composites display substantially improved microwave absorption properties, which can reach nearly - 43.1 dB (15.1 GHz) with a broader effective absorption bandwidth (RL < - 10 dB) of 6.1 GHz. The excellent microwave-absorbing properties of the FS.sub.xHP composites are closely associated with the layer of SiO.sub.2 shells and can be attributed to the proper impedance matching and synergistic interaction of the special core/shell/shell structures, dielectric loss (SiO.sub.2 and PPy layers) and magnetic loss (gamma-Fe.sub.2O.sub.3). These results show that the core/shell/shell structure may be an efficient and promising way to improve microwave absorption properties.