-
Optimisation of the slag mode in the ladle during the steel processing of secondary metallurgy = Optimiranje žlindre v ponovci pri izdelavi jekla po postopku sekundarne metalurgijeSocha, Ladislav ...Optimisation of the slag mode in the ladle with the help of briquetted fluxingagents, based on Al2O3 under various technological conditions is the object of this paper. The aim of the industrial ... experiments was to assess the possibility of achieving the optimum chemical composition of the slag that would improve the kinetic conditions of the refining ladle slag during the treatment in secondary metallurgy units. Industrial experiments were focused on comparing the influences of different slag-making agents such as lime (CaO), briquetted fluxing agents and deoxidation agents forming calcium carbide (CaC2) and granular aluminium (Algranul). During the evaluation of the slag mode in the ladle, samples of the steel from different technological places under operational conditions were taken to assess the desulphurization degree. The samples of the slag for evaluating the chosen parameters, such as basicity, the content of easily reducible oxides, the proportion of CaO/Al2O3 and the Mannesmann index, were taken too. Further, the temperature and the oxygen activity in the steel were continuously measured too. The results mentioned in this paper represent the basic information about the possibilities of the slag-mode optimisation in the ladle using different proportions of the slag-making additions, briquetted fluxing agents as well as the deoxidation agents within secondary metallurgy.Vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 47, št. 5, sep.-okt. 2013, str. 673-678)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2013Jezik - angleškiCOBISS.SI-ID - 1021866
Avtor
Socha, Ladislav |
Bažan, Jiří |
Gryc, Karel |
Morávka, Jan |
Styrnal, Petr |
Pilka, Václav |
Piegza, Zbygněv
Teme
secondary metallurgy |
slag |
fluxing agents |
steel |
desulphurization |
sekundarna metalurgija |
žlindra |
talilno sredstvo |
jeklo |
razogljičenje
vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 47, št. 5, sep.-okt. 2013, str. 673-678)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Socha, Ladislav | |
Bažan, Jiří | |
Gryc, Karel | |
Morávka, Jan | |
Styrnal, Petr | |
Pilka, Václav | |
Piegza, Zbygněv |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.