Dinamično masno uravnoteženje togih rotorjev : magistrsko delo magistrskega študijskega programa II. stopnje
Luznar, Janez, 1991-
This work deals with the mass balancing of rigid rotors from data acquisition to the identification of mass imbalance and a modification of balancing machine for identification of mass unbalance in ...rotor assembly. First of all, the experimental setup of the measurement chain was made to capture the measured quantities. Then the analytical model was built, which calculates the angle and the magnitude of mass unbalance from measured forces in supports and angle rotation indication. The analytical model was verified with simulated data before using it on the balancing machine. The accuracy of identification was verified with the usage of precision rotor. Afterwards a modification of balancing machine was made with which mass unbalance of rotor assembly could be identified. To achieve the ultimate goal, the noise and vibrations of ten samples were measured. First measurements were done for samples with the existing technology. For those samples additional dynamic mass balancing and remeasurements of noise and vibrations were made. In conclusion the obtained results were compared.
Vrsta gradiva - magistrsko delo
; neleposlovje za odrasle
Založništvo in izdelava - Ljubljana : [J. Luznar], 2014
Bibliografsko gradivo je bilo uspešno dodano na polico.
Dodajanje bibliografskega gradiva na polico ni uspelo.
Gradivo je že na polici.
Trajna povezava
URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto
Faktor vpliva
Izdaja
Kategorija
Razvrstitev
JCR
SNIP
JCR
SNIP
JCR
SNIP
JCR
SNIP
Izberite knjižnično izkaznico:
Baze podatkov,
v katerih je revija indeksirana
Ime baze podatkov
Področje
Leto
Povezave do osebnih bibliografij avtorjev
Povezave do podatkov o raziskovalcih v sistemu SICRIS
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Citiranje
Funkcionalnost trenutno ni na voljo. Prosimo, poskusite kasneje.
