(UL)
-
Iterative closest point-based data fusion of non-synchronized in-situ and ex-situ data in laser powder bed fusionKozjek, Dominik ...With the development of additive manufacturing (AM) processes, a variety of methods and technologies for process monitoring and post-process inspection have become available. These, together with ... modern computerized machines, generate large amounts of data about the process. Hence, efficient analysis methods for extracting useful information and knowledge from these datasets are needed. This paper presents a method for automated data fusion of machine input toolpath commands, on-axis intensity monitoring, and Computed Tomography (CT) scan measurement data in laser metal powder-bed fusion AM. The iterative closest point (ICP) point-clouds registration method is used for fine spatial alignments of (1) on-axis intensity measurements with machine input toolpath commands and (2) machine input toolpath and CT scan. The input-toolpath point cloud is selected as the reference point cloud. We further propose a post-processing method that can correct part of the wrong connections between measurements and toolpath points as results of ICP registration. The proposed method is suitable for merging data where there is no temporal synchronization between the machine commands and the monitoring system, and where the actual laser scan path may deviate from the machine input toolpath commands, e.g., due to dynamics constraints of scanning galvo mirror system. The method is designed to handle dynamic changes in input process parameters such as dynamic changes in laser power and scan speed, which lays a solid foundation for advanced AM process control, qualification and certification. A practical solution for organizing and storing the fused data, which allows for efficient analysis, is also presented. The results show that the method can spatially align all three different types of data and find the corresponding input toolpath command for each measurement point. The alignment of on-axis measurements and machine input toolpath commands has been improved by using a clustering algorithm. The main limitation is that, for estimating the improvement and error of spatial alignment, the average difference between the closest points of two point clouds is used, but this metric does not give an exact value of an actual registration error. The estimation of connectivity error is based on a visual comparison of registration results.Vir: Journal of manufacturing systems. - ISSN 0278-6125 (Vol. 66, Feb. 2023, str. 179-199)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2023Jezik - angleškiCOBISS.SI-ID - 138879747
Avtor
Kozjek, Dominik |
Porter, Conor |
Carter, Fred M. III |
Bhattad, Pradeep |
Brackman, Paul |
Lisovich, Aleksandr |
Mogonye, Jon-Erik |
Cao, Jian
Teme
additive manufacturing |
data fusion |
data registration |
big data |
aditivna proizvodnja |
fuzija podatkov |
registracija oblakov točk |
velepodatki
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Kozjek, Dominik | 38151 |
Porter, Conor | |
Carter, Fred M. III | |
Bhattad, Pradeep | |
Brackman, Paul | |
Lisovich, Aleksandr | |
Mogonye, Jon-Erik | |
Cao, Jian |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: