An advanced real-time capable mixture controlled combustion model
Katrašnik, Tomaž
The paper presents an innovative and advanced MCC (mixture controlled combustion). The MCC model is coupled to the innovative mechanistically based 0D spray model presented in a companion paper [1] ...that provides inputs on fuel mass distribution. Advanced MCC model is embedded into a 2-zone combustion modeling framework. Advanced MCC predicts ROHR (Rate-Of-Heat-Release) as the combination of the premixed and two diffusion parts, which correspond to rich and lean spray region. It also calculates the amount of fuel available for premixed combustion based on the duration of the ignition delay period. In addition, it reduces the reaction rate based on the oxygen availability using mechanistic basis, based on evaporation rate and based on mechanistically determined fuel amount that has reached the walls. High level of model predictability was confirmed by good agreement between the simulated and the measured ROHR traces over very broad operating range of the engine by using fixed parameters of the advanced MCC model and the spray model. Moreover, the applied modeling framework with embedded innovative spray and advanced MCC model features HiL (Hardware-in-the-Loop) compatible computational times.
Bibliografsko gradivo je bilo uspešno dodano na polico.
Dodajanje bibliografskega gradiva na polico ni uspelo.
Gradivo je že na polici.
Trajna povezava
URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto
Faktor vpliva
Izdaja
Kategorija
Razvrstitev
JCR
SNIP
JCR
SNIP
JCR
SNIP
JCR
SNIP
Izberite knjižnično izkaznico:
Baze podatkov,
v katerih je revija indeksirana
Ime baze podatkov
Področje
Leto
Povezave do osebnih bibliografij avtorjev
Povezave do podatkov o raziskovalcih v sistemu SICRIS
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Citiranje
Funkcionalnost trenutno ni na voljo. Prosimo, poskusite kasneje.
