Development of a load cell for friction force measurement
Klemenc, Jernej ...
ǂThe ǂResearch Group LAVEK from Faculty of Mechanical Engineering in Ljubljana has developed a proof-stand for fatigue strength determination of aluminium components under conditions of fretting and ...plane-reverse-bending as a part of an international COPERNICUS project. Before the proof-stand was built, a FEM analysis of stress-strain state in the contact between a specimen and two clamps (which are used to impose additional compressive load to the specimen so as fretting will occur) was performed with an assumed coefficient of friction. In order to perform a numerical analysis for real operating conditions, it was necessary to measure the coefficient of friction between the specimen and the clamp during the testing. The coefficient of friction in the contact is the ratio of the normal force imposed by the clamp and the average of the friction force in the contact. Since the normal force is known, the average friction force in the contact has to be measured in order to determine the coefficient of friction. To meet this aim a special load cell for friction force measurement was designed.
Bibliografsko gradivo je bilo uspešno dodano na polico.
Dodajanje bibliografskega gradiva na polico ni uspelo.
Gradivo je že na polici.
Trajna povezava
URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto
Faktor vpliva
Izdaja
Kategorija
Razvrstitev
JCR
SNIP
JCR
SNIP
JCR
SNIP
JCR
SNIP
Izberite knjižnično izkaznico:
Baze podatkov,
v katerih je revija indeksirana
Ime baze podatkov
Področje
Leto
Povezave do osebnih bibliografij avtorjev
Povezave do podatkov o raziskovalcih v sistemu SICRIS
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Citiranje
Funkcionalnost trenutno ni na voljo. Prosimo, poskusite kasneje.
