(UM)
-
Effect of a foaming agent and its morphology on the foaming behaviour, cell-size distribution and microstructural uniformity of closed-cell aluminium foams = Vpliv vrste in morfologije sredstva za penjenje na proce penjenja, porazdelitev por po velikosti in uniformnost mikrostrukture aluminijskih pen z zaprtimi poramiKevorkijan, Varužan ...A quantitative evaluation of the microstructure of aluminium foams and, particularly, any quantitative comparison is a very demanding and complex issue. In this work, the cell-size distribution (CSD) ... was proposed as the most efficient approach for their assessment. The foams were made by the powder metallurgy (P/M) route, by applying titanium hydride and dolomite powders of five different average particle sizes as the foaming agents. The average size of the pores and the pore-size distribution were estimated by assessing optical and scanning electron micrographs of as-polished foam bars by applying the point-counting method and image-analysis software. The uniformity of the CSD in the foamed samples with closed cells was studied as a function of the particle size distribution of the foaming agents, the average particle size of the applied AlSi12 powders, the concentration of the foaming agents, the foaming temperature and the foaming time. Generally, the samples foamed with the dolomite foaming agent had a more uniform cell-size distribution and a lower average bubble size. The most uniform cell-size distribution was achieved in the foam samples foamed with the minimum amount of the mass fraction (w = 0.5 %) of dolomite powder grades, having the lowest average particle size and a narrow particle-size distribution. In contrast, in samples made from coarser and less-uniform grades of foaming agents, the cell-size distribution was broader, with a significantly higher fraction of large bubbles. Longer foaming times and higher foaming temperatures also led to foam samples with a less-uniform microstructure. Based on the experimental findings and theoretical considerations regarding aluminium-foam microstructural development, the preconditions for stable bubble growth into a homogeneous and uniform foam structure were modelled and compared with the experimentally determined values.Vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 46, št. 3, maj-jun. 2012, str. 233-238)Vrsta gradiva - članek, sestavni delLeto - 2012Jezik - angleškiCOBISS.SI-ID - 915626
![loading ... loading ...](themes/default/img/ajax-loading.gif)
vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 46, št. 3, maj-jun. 2012, str. 233-238)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Kevorkijan, Varužan | 04968 |
Škapin, Srečo D. | 11093 |
Paulin, Irena | 28660 |
Kovačec, Uroš | ![]() |
Jenko, Monika, metalurginja | 05675 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: