The current study aimed at analyzing the response of semisolid A357 aluminum alloys to unconventional thermal treatment cycles of T4/T6/T7 conditions. The mechanical, electrical, and microstructural characterizations of such semisolid alloys were investigated. The microstructure evolutions of Fe-intermetallic phases and strengthening precipitates were characterized using scanning electron microscopy (SEM) and transmission electron microscopy (TEM), respectively. The mechanical failure of such semi solid A357 aluminum alloys, used for suspension automotive parts, is mostly related to cracking issues which start from the surface due to hardness problems and propagate due to severe load variations. For these reasons, the multiple thermal aging cycles, in this study, are applied to enhance the mechanical properties and to have compromised values compared to those obtained by standard thermal treatments. The results obtained in this work indicate that the heat treatment of this alloy can be optimized. The results showed that the optimum characteristics of A357 semisolid alloys were obtained by applying thermal under-aging cycle, interrupted thermal aging cycles and a T7/T6 two steps aging treatment condition. The electrical conductivity and electron microscopy were applied in this study to analyze the characteristics of hardening phases formed due to different aging cycles applied to the alloys investigated.