DIKUL - logo
E-viri
Celotno besedilo
Recenzirano
  • Parametric optimisation of ...
    Song, Jian; Li, Xiaoya; Wang, Kai; Markides, Christos N.

    Energy conversion and management, 08/2020, Letnik: 218
    Journal Article

    •A combined-cycle S-CO2/ORC system is presented for ICE waste-heat recovery.•Comparisons are shown with a standalone S-CO2 cycle system for a 1170 kW ICE.•The combined-cycle system has a 58% higher maximum net power output.•The combined-cycle system has a 4% higher minimum specific investment cost (4670 $/kW)•Significant performance improvements can be achieved for a range of ICEs of different sizes. Supercritical CO2 (S-CO2) power-cycle systems are a promising technology for waste-heat recovery from internal combustion engines (ICEs). However, the effective utilisation of the heat from both the exhaust gases and cooling circuit by a standalone S-CO2 cycle system remains a challenge due to the unmatched thermal load of these heat sources, while a large amount of unexploited heat is directly rejected in the system’s pre-cooler. In this paper, a combined-cycle system for ICE waste-heat recovery is presented that couples an S-CO2 cycle to a bottoming organic Rankine cycle (ORC), which recovers heat rejected from the S-CO2 cycle system, as well as thermal energy available from the jacket-water and exhaust-gas streams that have not been utilised by the S-CO2 cycle system. Parametric optimisation is implemented to determine operating conditions for both cycles from thermodynamic and economic perspectives. With a baseline case using a standalone S-CO2 cycle system for an ICE with a rated power output of 1170 kW, our investigation reveals that the combined-cycle system can deliver a maximum net power output of 215 kW at a minimum specific investment cost (SIC) of 4670 $/kW, which are 58% and 4% higher than those of the standalone S-CO2 cycle system, respectively. A range of ICEs of different sizes are also considered, with significant performance improvements indicating a promising potential of exploiting such combined-cycle systems. This work motivates the pursuit of further performance improvements to waste-heat recovery systems from ICEs and other similar applications.