ALL libraries (COBIB.SI union bibliographic/catalogue database)
-
The Stribeck curve and lubrication design for non-fully wetted surfacesKalin, Mitjan ; Velkavrh, Igor ; Vižintin, JožeTailoring the properties of tribological interfaces is difficult, but it can be a very efficient way to reduce wear and friction and so increase service life - providing it can be done successfully. ... However, when considering the interface properties it is necessary not only to take into account the solid-solid contacts, we also need to consider the solid-liquid interfaces, which can have a very significant impact on the micro- and macro-contacts, andwhich cannot be neglected. In this investigation we show that it is essential to consider the wetting, or slip, properties of the non-fully wettedsurfaces when designing the lubrication, and that this is also to a large extent predictable and relatively simple to implement. We discuss the differences between several types of contacts, using steel and DLC as model materials for fully wetted and non-fully wetted surfaces, respectively. We studied steel/steel, steel/DLC and DLC/DLC pairs, and we present the experimental evidence for how the Stribeck curve changes if one or two surfaces in the contact are non-fully wetted. Firstly, in the EHL regime the friction of non-fully wetted surfaces decreases significantly; in our case by around 15% and by more than 20%, respectively, while at minimum friction (the EHL > ML transition) the reduction in friction is lower, but still about 6%, and as high as 9%. Secondly, the film thickness of the non-fully wetted contacts is reduced, which causes a shift in the minimum friction (the Stribeck curve) to higher v/F values. This suggests a lower bearing capacity for these contacts and the potential danger of a transition in the lubricationregime and, as a result, increased wear. However, we have derived several "ready-to-use" diagrams that are generally valid for any oil and surface properties and which allow us to define the film thickness, the lambdaparameter and the regime transition for different wetting/slip properties. These diagrams can be used directly to improve the prediction and design of the lubrication quality and the regimes of the macro-scale contacts by employing a currently used, conventional methodology and equations. Moreover, based on the experimental results and the "ready-to-use" diagrams derived in this investigation for non-fully wetted contacts, the slip at the solid-liquid interface, i.e., the DLC-PAO oil, was estimated independently from the data of two Stribeck curves to be about 20%.Source: Wear. - ISSN 0043-1648 (Vol. 267, issues 5-8, 15. jun. 2009, str. 1232-1240)Type of material - article, component partPublish date - 2009Language - englishCOBISS.SI-ID - 10955035
Author
Kalin, Mitjan |
Velkavrh, Igor |
Vižintin, Jože
Topics
wetting |
slip |
oils |
DLC |
Stribeck |
Lambda |
DLC prevleke |
olja |
mazanje |
trenje |
tribologija
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Kalin, Mitjan | 14556 |
Velkavrh, Igor | 28613 |
Vižintin, Jože | 00812 |
Source: Personal bibliographies
and: SICRIS
Select pickup location:
Material pickup by post
Delivery address:
Address is missing from the member's data.
The address retrieval service is currently unavailable, please try again.
By clicking the "OK" button, you will confirm the pickup location selected above and complete the reservation process.
By clicking the "OK" button, you will confirm the above pickup location and delivery address, and complete the reservation process.
By clicking the "OK" button, you will confirm the address selected above and complete the reservation process.
Notification
Automatic login and reservation service currently not available. You can reserve the material on the Biblos portal or try again here later.
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
Pickup location | Material status | Reservation |
---|
Reservation in progress
Please wait a moment.
Reservation was successful.
Reservation failed.
Reservation...
Membership card:
Pickup location: