Faculty of Mechanical Engineering, Lj. (FSLJ)
-
Influence of load, sliding speed and heat-sink volume on the tribological behaviour of polyoxymethylene (POM) sliding against steelSiddiqui, M. Shoaib Naseem ; Pogačnik, Aljaž, 1985- ; Kalin, MitjanThis work focuses on a tribological and contact-temperature investigation of unreinforced polyoxymethylene (POM) sliding against steel (DIN 100Cr6) under a wide range of loads and sliding speeds. We ... have investigated a wider range than is commonly studied, along with different heat-sink volumes of the steel counter-body (3-fold variation). Four empirical contact-load criteria, i.e., wear-change factor, mechanical load factor, thermal load factor, and critical temperature factor, were introduced to complement the evaluation of the tribological behaviour and the contact temperature. Moreover, these factors are not limited to current materials, but provide general methodological approach. Irrespective of the heat-sink volume, even with an 8-fold increase in the p · v value (0.6–4.8 MPa.m/s), the wear mechanism does not change significantly. This beneficial behaviour is mainly due to the synergistic interplay of the mechanical and thermal loads, which mutually suppress the domination and critical state of a single wear mechanism, either mechanical-based or thermal-based, which was understood through novel empirical factor analyses. Another key parameter for maintaining stable and beneficial tribological performance was the large thermal mass, i.e., the heat-sink volume of all the steel samples that suppressed the commonly observed high-temperature rise under severe contact conditions. Thus, the tribological performance was notably enhanced compared to previous studies under similar conditions, since the heat-sink volume was large enough and the balance between the thermal and mechanical loads was maintained.Source: Tribology international. - ISSN 0301-679X (Vol. 178, pt. A, Feb. 2023, str. 1-12)Type of material - article, component part ; adult, seriousPublish date - 2023Language - englishCOBISS.SI-ID - 129358083
Author
Siddiqui, M. Shoaib Naseem |
Pogačnik, Aljaž, 1985- |
Kalin, Mitjan
Topics
POM |
steels |
wear |
temperature |
POM |
jekla |
obraba |
temperatura
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Siddiqui, M. Shoaib Naseem | 51898 |
Pogačnik, Aljaž, 1985- | 33437 |
Kalin, Mitjan | 14556 |
Source: Personal bibliographies
and: SICRIS
Select pickup location:
Material pickup by post
Delivery address:
Address is missing from the member's data.
The address retrieval service is currently unavailable, please try again.
By clicking the "OK" button, you will confirm the pickup location selected above and complete the reservation process.
By clicking the "OK" button, you will confirm the above pickup location and delivery address, and complete the reservation process.
By clicking the "OK" button, you will confirm the address selected above and complete the reservation process.
Notification
Automatic login and reservation service currently not available. You can reserve the material on the Biblos portal or try again here later.
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
Pickup location | Material status | Reservation |
---|
Reservation in progress
Please wait a moment.
Reservation was successful.
Reservation failed.
Reservation...
Membership card:
Pickup location: