BA-type supergiants are amongst the most optically-bright stars. They are observable in extragalactic environments, hence potential accurate distance indicators. Emission activity in the Halpha line ...of the BA supergiants Rigel (B8Ia) and Deneb (A2Ia) is indicative of presence of localized time-dependent mass ejections. Here, we employ optical interferometry to study the Halpha line-formation region in these stellar environments. High spatial- (0.001 arcsec) and spectral- (R=30 000) resolution observations of Halpha were obtained with the visible recombiner VEGA installed on the CHARA interferometer, using the S1S2 array-baseline (34m). Six independent observations were done on Deneb over the years 2008 and 2009, and two on Rigel in 2009. We analyze this dataset with the 1D non-LTE radiative-transfer code CMFGEN, and assess the impact of the wind on the visible and near-IR interferometric signatures, using both Balmer-line and continuum photons. We observe a visibility decrease in Halpha for both Rigel and Deneb, suggesting that the line-formation region is extended (1.5-1.75 R*). We observe a significant visibility decrease for Deneb in the SiII6371 line. We witness time variations in the differential phase for Deneb, implying an inhomogeneous and unsteady circumstellar environment, while no such variability is seen in differential visibilities. Radiative-transfer modeling of Deneb, with allowance for stellar-wind mass loss, accounts fairly well for the observed decrease in the Halpha visibility. Based on the observed differential visibilities, we estimate that the mass-loss rate of Deneb has changed by less than 5%.
Abstract From Nov. 2019 to May 2020, the red supergiant star Betelgeuse experienced an unprecedented drop of brightness in the visible domain called the great dimming event. Large atmospheric dust ...clouds and large photospheric convective features are suspected to be responsible for it. To better understand the dimming event, we used mid-infrared long-baseline spectro-interferometric measurements of Betelgeuse taken with the VLTI/MATISSE instrument before (Dec. 2018), during (Feb. 2020), and after (Dec. 2020) the GDE. We present data in the 3.98 to 4.15 μm range to cover SiO spectral features molecules as well as adjacent continuum. We have employed geometrical models, image reconstruction, as well as radiative transfer models to monitor the spatial distribution of SiO over the stellar surface. We find a strongly in-homogeneous spatial distribution of SiO that appears to be looking very different between our observing epochs, indicative of a vigorous activity in the stellar atmosphere. The contrast of our images is small in the pseudo-continuum for all epochs, implying that our MATISSE observations support both cold spot and dust cloud model.
Context.
Carbon is one of the most abundant components in the Universe. While silicates have been the main focus of solid phase studies in protoplanetary discs (PPDs), little is known about the solid ...carbon content especially in the planet-forming regions (~0.1–10 au). Fortunately, several refractory carbonaceous species present C-H bonds (such as hydrogenated nano-diamond and amorphous carbon as well as polycyclic aromatic hydrocarbons), which generate infrared (IR) features that can be used to trace the solid carbon reservoirs. The new mid-IR instrument MATISSE, installed at the Very Large Telescope Interferometer (VLTI), can spatially resolve the inner regions (~1–10 au) of PPDs and locate, down to the au-scale, the emission coming from carbon grains.
Aims.
Our aim is to provide a consistent view on the radial structure, down to the au-scale, as well as basic physical properties and the nature of the material responsible for the IR continuum emission in the inner disk region around HD 179218.
Methods.
We implemented a temperature-gradient model to interpret the disk IR continuum emission, based on a multiwavelength dataset comprising a broadband spectral energy distribution and VLTI
H
-,
L
-, and
N
-bands interferometric data obtained in low spectral resolution. Then, we added a ring-like component, representing the carbonaceous
L
-band features-emitting region, to assess its detectability in future higher spectral resolution observations employing mid-IR interferometry.
Results.
Our temperature-gradient model can consistently reproduce our dataset. We confirmed a spatially extended inner 10 au emission in
H
- and
L
-bands, with a homogeneously high temperature (~1700 K), which we associate with the presence of stochastically heated nano-grains. On the other hand, the
N
-band emitting region presents a ring-like geometry that starts at about 10 au with a temperature of 400 K. Moreover, the existing low resolution MATISSE data exclude the presence of aromatic carbon grains (i.e., producing the 3.3 μm feature) in close proximity tothe star (≲1 au). Future medium spectral resolution MATISSE data will confirm their presence at larger distances.
Conclusions.
Our best-fit model demonstrates the presence of two separated dust populations: nano-grains that dominate the near- to mid-IR emission in the inner 10 au region and larger grains that dominate the emission outward. The presence of such nano-grains in the highly irradiated inner 10 au region of HD 179218 requires a replenishment process. Considering the expected lifetime of carbon nano-grains from The Heterogeneous dust Evolution Model for Interstellar Solids (THEMIS model), the estimated disk accretion inflow of HD 179218 could significantly contribute to feed the inner 10 au region in nano-grains.Moreover, we also expect a local regeneration of those nano-grains by the photo-fragmentation of larger aggregates.
Context. Carbon is one of the most abundant components in the Universe. While silicates have been the main focus of solid phase studies in protoplanetary discs (PPDs), little is known about the solid ...carbon content especially in the planet-forming regions (~0.1–10 au). Fortunately, several refractory carbonaceous species present C-H bonds (such as hydrogenated nano-diamond and amorphous carbon as well as polycyclic aromatic hydrocarbons), which generate infrared (IR) features that can be used to trace the solid carbon reservoirs. The new mid-IR instrument MATISSE, installed at the Very Large Telescope Interferometer (VLTI), can spatially resolve the inner regions (~1–10 au) of PPDs and locate, down to the au-scale, the emission coming from carbon grains. Aims. Our aim is to provide a consistent view on the radial structure, down to the au-scale, as well as basic physical properties and the nature of the material responsible for the IR continuum emission in the inner disk region around HD 179218. Methods. We implemented a temperature-gradient model to interpret the disk IR continuum emission, based on a multiwavelength dataset comprising a broadband spectral energy distribution and VLTI H-, L-, and N-bands interferometric data obtained in low spectral resolution. Then, we added a ring-like component, representing the carbonaceous L-band features-emitting region, to assess its detectability in future higher spectral resolution observations employing mid-IR interferometry. Results. Our temperature-gradient model can consistently reproduce our dataset. We confirmed a spatially extended inner 10 au emission in H- and L-bands, with a homogeneously high temperature (~1700 K), which we associate with the presence of stochastically heated nano-grains. On the other hand, the N-band emitting region presents a ring-like geometry that starts at about 10 au with a temperature of 400 K. Moreover, the existing low resolution MATISSE data exclude the presence of aromatic carbon grains (i.e., producing the 3.3 μm feature) in close proximity tothe star (≲1 au). Future medium spectral resolution MATISSE data will confirm their presence at larger distances. Conclusions. Our best-fit model demonstrates the presence of two separated dust populations: nano-grains that dominate the near- to mid-IR emission in the inner 10 au region and larger grains that dominate the emission outward. The presence of such nano-grains in the highly irradiated inner 10 au region of HD 179218 requires a replenishment process. Considering the expected lifetime of carbon nano-grains from The Heterogeneous dust Evolution Model for Interstellar Solids (THEMIS model), the estimated disk accretion inflow of HD 179218 could significantly contribute to feed the inner 10 au region in nano-grains.Moreover, we also expect a local regeneration of those nano-grains by the photo-fragmentation of larger aggregates.
Context. The interpretation of stellar pulsations in terms of internal structure depends on the knowledge of the fundamental stellar parameters. Long-base interferometers permit us to determine very ...accurate stellar radii, which are independent constraints for stellar models that help us to locate the star in the HR diagram. Aims. Using a direct interferometric determination of the angular diameter and advanced three-dimensional (3D) modeling, we derive the radius of the CoRoT target HD 49933 and reduce the global stellar parameter space compatible with seismic data. Methods. The VEGA/CHARA spectro-interferometer is used to measure the angular diameter of the star. A 3D radiative hydrodynamical simulation of the surface is performed to compute the limb darkening and derive a reliable diameter from visibility curves. The other fundamental stellar parameters (mass, age, and Teff) are found by fitting the large and small p-mode frequency separations using a stellar evolution model that includes microscopic diffusion. Results. We obtain a limb-darkened angular diameter of θLD = 0.445 ± 0.012 mas. With the Hipparcos parallax, we obtain a radius of R = 1.42 ± 0.04 R⊙. The corresponding stellar evolution model that fits both large and small frequency separations has a mass of 1.20 ± 0.08 M⊙ and an age of 2.7 Gy. The atmospheric parameters are Teff = 6640 ± 100 K, log g = 4.21 ± 0.14, and Fe/H = −0.38.
AGB stars are one of the main sources of dust production in the Galaxy. However, it is not clear what this process looks like and where the dust is condensing in the circumstellar environment. By ...characterizing the location of the dust and the molecules in the close environment of an AGB star, we aim to achieve a better understanding the history of the dust formation process. We observed the carbon star R Scl with the VLTI-MATISSE instrument in L- and N-bands. The high angular resolution of the VLTI observations, combined with a large uv-plane coverage allowed us to use image reconstruction methods. To constrain the dust and molecules' location, we used two different methods: MIRA image reconstruction and the 1D code RHAPSODY. We found evidence of C2H2 and HCN molecules between 1 and 3.4 Rstar which is much closer to the star than the location of the dust (between 3.8 and 17.0 Rstar). We also estimated a mass-loss rate of 1.2+-0.4x10-6 Msun per yr. In the meantime, we confirmed the previously published characteristics of a thin dust shell, composed of amorphous carbon (amC) and silicon carbide (SiC). However, no clear SiC feature has been detected in the MATISSE visibilities. This might be caused by molecular absorption that can affect the shape of the SiC band at 11.3 micron. The appearance of the molecular shells is in good agreement with predictions from dynamical atmosphere models. For the first time, we co-located dust and molecules in the environment of an AGB star. We confirm that the molecules are located closer to the star than the dust. The MIRA images unveil the presence of a clumpy environment in the fuzzy emission region beyond 4.0 Rstar. Furthermore, with the available dynamic range and angular resolution, we did not detect the presence of a binary companion. Additional observations combining MATISSE and SAM-VISIR instrument should enable this detection in future studies.
Carbon is one of the most abundant components in the Universe. While silicates have been the main focus of solid phase studies in protoplanetary discs (PPDs), little is known about the solid carbon ...content especially in the planet-forming regions (\(\sim \)0.1 to 10 au). Fortunately, several refractory carbonaceous species present C-H bonds (such as hydrogenated nano-diamond and amorphous carbon as well as polycyclic aromatic hydrocarbons (PAHs)), which generate infrared (IR) features that can be used to trace the solid carbon reservoirs. The new mid-IR instrument MATISSE, installed at the Very Large Telescope Interferometer (VLTI), can spatially resolve the inner regions (\(\sim\) 1 to 10 au) of PPDs and locate, down to the au-scale, the emission coming from carbon grains. Our aim is to provide a consistent view on the radial structure, down to the au-scale, as well as basic physical properties and the nature of the material responsible for the IR continuum emission in the inner disk region around HD 179218. We implemented a temperature-gradient model to interpret the disk IR continuum emission, based on a multiwavelength dataset comprising a broadband spectral energy distribution (SED) and VLTI H-, L-, and N-bands interferometric data obtained in low spectral resolution. Then, we added a ring-like component, representing the carbonaceous L-band features-emitting region, to assess its detectability in future higher spectral resolution observations employing mid-IR interferometry.
Context. The interpretation of stellar pulsations in terms of internal structure depends on the knowledge of the fundamental stellar parameters. Long-base interferometers permit us to determine very ...accurate stellar radii, which are independent constraints for stellar models that help us to locate the star in the HR diagram. Aims: Using a direct interferometric determination of the angular diameter and advanced three-dimensional (3D) modeling, we derive the radius of the CoRoT target HD 49933 and reduce the global stellar parameter space compatible with seismic data. Methods: The VEGA/CHARA spectro-interferometer is used to measure the angular diameter of the star. A 3D radiative hydrodynamical simulation of the surface is performed to compute the limb darkening and derive a reliable diameter from visibility curves. The other fundamental stellar parameters (mass, age, and Teff) are found by fitting the large and small p-mode frequency separations using a stellar evolution model that includes microscopic diffusion. Results: We obtain a limb-darkened angular diameter of {\theta}LD = 0.445 \pm 0.012 mas. With the Hipparcos parallax, we obtain a radius of R = 1.42 \pm 0.04 Rsun. The corresponding stellar evolution model that fits both large and small frequency separations has a mass of 1.20 \pm 0.08 Msun and an age of 2.7 Gy. The atmospheric parameters are Teff = 6640 \pm 100 K, log g = 4.21 \pm 0.14, and Fe/H = -0.38.
PDF
