We consider properties of dichroic antenna arrays on a silicon substrate with integrated cold-electron bolometers to detect radiation at frequencies of 210 and 240 GHz. This frequency range is widely ...used in cosmic microwave background experiments in space, balloon, and ground-based missions such as BICEP Array, LSPE, LiteBIRD, QUBIC, Simons Observatory, and AliCPT. As a direct radiation detector, we use cold-electron bolometers, which have high sensitivity and a wide operating frequency range, as well as immunity to spurious cosmic rays. Their other advantages are the compact size of the order of a few micrometers and the effect of direct electron cooling, which can improve sensitivity in typical closed-loop cycle
He cryostats for space applications. We study a novel concept of cold-electron bolometers with two SIN tunnel junctions and one SN contact. The amplitude-frequency characteristics measured with YBCO Josephson Junction oscillators show narrow peaks at 205 GHz for the 210 GHz array and at 225 GHz for the 240 GHz array; the separation of these two frequency bands is clearly visible. The noise equivalent power level at an operating point in the current bias mode is 5 × 10
W/√Hz.
Hafnium is a superconductor with a transition temperature slightly above 100 mK. This makes it attractive for such applications as microcalorimeters with high energy resolution. We report the ...superconducting properties of Hf films of thicknesses ranging from 60 to 115 nm, deposited on Si and Al
O
substrates by electron beam evaporation. Besides that, we fabricated and measured combinations of hafnium with thin layers of normal metals, decreasing the critical temperature by the proximity effect. The critical temperature of the studied films varied from 56 to 302 mK. We have observed a significant change in the critical temperature of some films over time, which we propose to prevent by covering hafnium films with a thin layer of titanium.
Electron on-chip cooling from the base temperature of 300 mK is very important for highly sensitive detectors operating in space due to problems of dilution fridges at low gravity. Electron cooling ...is also important for ground-based telescopes equipped with
3
He cryostats being able to function at any operating angle. This work is aimed at the investigation of electron cooling in the low-temperature range. New samples of cold-electron bolometers with traps and hybrid superconducting/ferromagnetic absorbers have shown a temperature reduction of the electrons in the refrigerator junctions from 300 to 82 mK, from 200 to 33 mK, and from 100 to 25 mK in the idle regime without optical power load. The electron temperature was determined by solving heat balance equations with account of the leakage current, sixth power of temperature in the whole temperature range, and the Andreev current using numerical methods and an automatic fit algorithm.
We present the results of the experimental and theoretical study of the resonant properties and noise of a single cell of a receiving system based on cold-electron bolometers (CEB) with a ...double-folded slot antenna and coplanar lines. The system was designed to receive signals at 220/240 GHz frequencies with a 5% bandwidth. In measurements, we used the samples of the double-folded slot antennas with slot lengths of 162 um and coplanar line lengths from 185 to 360 um. Measurements of the resonance properties of CEB located at 0.3 K cryostat plate were carried out using a generator based on a high-temperature YBCO Josephson junction located inside the same cryostat at 4 K plate. This arrangement made it possible to obtain smooth amplitude-frequency characteristics with a clearly defined peak of a 15–21 GHz bandwidth at different frequencies. Based on these results, 2-D array of double-folded slot antennas with CEBs as 220/240 GHz LSPE channel prototype was calculated.The absorption efficiency of the array has reached 81% and 77% for 220 and 240 GHz channels, respectively.
Here we present the results of a numerical modeling of mode composition in the constriction of the Large Scale Polarization Explorer-Short-Wavelength Instrument for the Polarization Explorer ...(LSPE-SWIPE) back-to-back horn. These results are used for calculating the frequency response of arrays of planar dipole antennas with cold-electron bolometers for 145, 210, and 240 GHz frequencies. For the main frequency channel (i.e., 145 GHz) we have a 45 GHz bandwidth. For the auxiliary frequency channels (i.e., 210 and 240 GHz) placed on the same substrate, we have bandwidths of 26 and 38 GHz, respectively. We performed some optimizations for cold-electron bolometers to achieve a photon noise-equivalent power of 1.1 × 10
−16
W/Hz
1/2
. This was achieved by replacing one of two superconductor–insulator–normal tunnel junctions with a superconductor–normal metal contact.
The resonant properties of Cold-Electron Bolometers (CEBs) located at a 0.3 K cryostat plate are measured using a 50 μm long high-temperature YBa2Cu3O7−δ (YBCO) Josephson junction oscillator, placed ...on a 2.7 K plate of the same cryostat. For these purposes, a bunch of YBCO Josephson oscillators with various lengths of dipole antennas and overlapping generation bands has been developed and investigated in 50–500 GHz frequency range. Two setups of Josephson junction placement were compared, and as a result, various narrow-band receiving systems with CEBs have been measured, demonstrating the feasibility of the presented approach.
We have developed and realized a novel multichroic seashell antenna with internal bandpass filters by resonant slots and cold-electron bolometers (CEB). Slots and CEBs are connected by coplanar ...waveguides (CPW) instead of microstrip lines to realize the most reliable single-layer technology. The internal resonance is organized by a series resonance of slots with CPW and capacitances of superconductor/insulator/normal (SIN) tunnel junctions. In contrast, a conventional multichroic pixel consists of a wideband sinuous antenna coupled to TES detectors by long microstrip lines with overlap and external on-chip filters for different frequency bands. A common problem with a conventional multichroic pixel is that the beam width is frequency dependent for different frequency bands. Besides that, this system with external filters is quite large and includes long microstrip lines with unavoidable overlap and rater high losses. The multichroic seashell antenna with internal resonances avoids all these problems. The main advantage of this antenna is an opportunity to tune separate pairs of phased slots for each frequency band independently. We used pairs of λ/2 slots for 75 and 105 GHz, connected by CPW to CEBs. The connection of CPW to slots was shifted closer to the end of slots for proper RF matching. Each CEB included two SIN junctions and an absorber. SIN junctions had capacitances of 77 and 67 fF. Wave impedance of the antenna was near 50 Ohm and resistance of the absorber was matched to this value. RF testing was done at 314 mK irradiating this chip by frequency sweep of a generator from 78-118 GHz. The response curves have shown clear resonances around 75 and 105 GHz with a quality factor around 5. These experiments confirmed that the seashell antenna with the internal filters by resonant slots and CEBs could effectively be used for creating multiband elements.
A novel type of the seashell slot antenna with internal filters by the capacitance of resonant cold-electron bolometers (RCEB) and kinetic inductance of the NbN superconducting nanostrip has been ...realized for multifrequency pixels. Seashell antenna gives the opportunity to connect opposite slots by coplanar waveguides (CPW) instead of microstrip lines (MSL). A conventional multifrequency pixel combines a wideband antenna and narrowband filters with long microstrip lines with unavoidable losses and overlaps. Another problem is the frequency dependent beam width due to a fixed pixel diameter for multiple frequencies. The main advantage of the seashell antenna with nano-filters is independent tuning of the separate pairs of slots for each frequency avoiding frequency dependence of the beam width. We used λ/2 slots for 75 and 105 GHz, feeding by CPW near the end of slots for RF matching. Each RCEB includes two SIN (Superconductor-Insulator-Normal) tunnel junctions with a nano-absorber and NbN kinetic inductance of 450 or 310 pH. SIN junctions had capacitances of 9.3 and 7.2 fF and absorber matched to a wave impedance of the antenna near 50 Ohm. Kinetic inductance value was estimated at the level of 35 pH/sq. RF testing was done at 300 mK irradiating this chip by sweep generator from 60 to 120 GHz. The response curves showed clear resonances at 75 and 105 GHz with a quality factor of 10 and 7. These experiments confirm that the seashell antenna with the internal RCEB filters can be used for frequency selection in compact multiband pixels.
PDF
