Single-photon avalanche diodes (SPADs) in the CMOS technology are very attractive solution for photon detection due to the excellent timing resolution achievable. Unfortunately, such devices suffer ...from large values of the dark count (DC) pedestals. In this paper, we analyzed a test chip containing SPADs with different layouts, implemented in the 150-nm CMOS technology. The behavior of such devices has been investigated after proton irradiation. It is observed that, after irradiation, the DC rate switches between two or more discrete levels, phenomenon known as random telegraph signal (RTS). The effect is related to the density and distribution of defects in the semiconductor lattice. RTS characteristics have been studied as the function of both temperature and bias voltage. Discussion of results and main hypotheses on defect types responsible for RTS are reported.
Neutron beams have been produced at Laboratory of High Energy Physics (LHEP) of University of Bern. LEHP is equipped with an 18 MeV cyclotron with an external beam line. Simulations, analytical ...calculations and kinematics studies have been carried out, in order to produce several neutron beam configurations with characteristics suited for specific applications. Furthermore, a procedure for energy modulation has been developed to match the fixed cyclotron energy to the needed requirements. The technique described in this work is of general application and can be applied to more intense beams up to 1010 pps.
The characteristics of radiochromic films such as the direct visualization of radiation field, ease of use and data analysis are suited for the dosimetry monitoring in tests of radiation hardness ...space applications. In particular, in this work, in order to study the dependence of radiation type, energy and dose rate, as well as the dynamic range of EBT3 Gafchromic films, a set of films was exposed to radiation sources used in total ionizing dose (60Co gamma- and 90Sr/90Y beta-rays). The results have been found to be particularly suited for the employment of this kind of films in radiation hardness assurance tests.
The VSiPMT (Vacuum Silicon PhotoMultiplier Tube) is an innovative design for a hybrid photodetector. The idea, born with the purpose to use a SiPM for large detection volumes, consists in replacing ...the classical dynode chain with a special SiPM. In this configuration, we match the large sensitive area of a photocathode with the performances of the SiPM technology, which therefore acts like an electron detector and so like a current amplifier. The excellent photon counting capability, fast response, low power consumption and the stability are among the most attractive features of the VSiPMT.We now present the progress on the realization of a 1-in. prototype and the preliminary tests we are performing on it.
•The VSiPMT is a new high gain photodetector with very good photon counting capability.•Simulations to realize a good focusing system have been done.•A test bench was set up to verify the simulations.•A 1-in. VSiPMT prototype has been realized and tested, with good results.•A 1-in. industrial prototype has been realized by Hamamatsu and is now under test.
Development of a new 2-inch hybrid photo-detector using MPPC Fukasawa, A.; Hotta, Y.; Ishizu, T. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
12/2018, Volume:
912
Journal Article
Peer reviewed
We have newly developed a Hybrid Photo-Detector (HPD) with 2-inch diameter. It consists of a bialkali photocathode and a 3 mm x 3 mm Multi-Pixel-Photon Counter (MPPC) sealed in a glass tube. The ...electric field inside the tube is designed so that photoelectrons emitted from the photocathode are collected in the MPPC, where photoelectrons are amplified. For conventional HPDs with an avalanche diode, extremely high voltage such as -8kV has to be provided to achieve gain sufficient for single photon detection. However, our HPD with MPPC has single photon sensitivity only with lower voltage like PMTs due to high gain of MPPC. In addition, this device can cover larger area with only one MPPC. These features enable us to easily handle high performance HPD in various applications, such as high energy physics, biomedical field etc. This test sample was produced in 2016, and we have checked its basic characteristics. The peak photocathode quantum efficiency was found to be very high of 37% at the wavelength of 340 nm. We have confirmed that HPD with MPPC has capability of single photon detection in low operation voltage less than -2 kV. This report will present detailed performance studies of this sample.
•A HPD with 2-inch diameter has been developed.•The peak photocathode quantum efficiency was found to be very high.•Capability of single photon detection in -1.5kV operation was confirmed.
The VSiPMT (Vacuum Silicon PhotoMultiplier Tube) is an innovative design we proposed for a revolutionary photon detector. The main idea is to replace the classical dynode chain of a PMT with a SiPM ...(G-APD), the latter acting as an electron detector and amplifier. The aim is to match the large sensitive area of a photocathode with the performance of the SiPM technology. The VSiPMT has many attractive features. In particular, a low power consumption and an excellent photon counting capability. To prove the feasibility of the idea we first tested the performance of a special non-windowed SiPM by Hamamatsu (MPPC) as electron detector and current amplifier. Thanks to this result Hamamatsu realized two VSiPMT industrial prototypes. In this work, we present the results of a full characterization of the VSiPMT prototype.
The VSiPMT (Vacuum Silicon PhotoMultiplier Tube) is an innovative design for a revolutionary hybrid photodetector. The idea, born with the purpose to use a SiPM for large detection volumes, consists ...in replacing the classical dynode chain with a SiPM. In this configuration, we match the large sensitive area of a photocathode with the performances of the SiPM technology, which therefore acts like an electron detector and so like a current amplifier. The excellent photon counting capability, fast response, low power consumption and great stability are among the most attractive features of the VSiPMT. In order to realize such a device we first studied the feasibility of this detector both from theoretical and experimental point of view, by implementing a Geant4-based simulation and studying the response of a special non-windowed MPPC by Hamamatsu with an electron beam. Thanks to this result Hamamatsu realized two VSiPMT industrial prototypes with a photocathode of 3mm diameter. We present the progress on the realization of a 1-inch prototype and the preliminary tests we are performing on it.
This work presents a novel optical method for selecting new liquid compounds for scintillation detectors. This method consists in the evaluation of the optical properties of the compounds and the ...definition of parameters quantifying their emission yield, based on the study of the scintillation spectra. It is a comparative method as it allows the choice of the best liquid scintillator among many through a step-by-step selection based on: (1) the fluorescence spectra of the matrix, (2) the fluorescence spectra of the matrix with a dye, (3) the Ion Beam Induced Luminescence spectra of the matrix with different dye percentages. We used the proposed method to identify new liquids which may be suitable for neutron detection. This work shows the results of this application: a new organic non-toxic and non-flammable liquid scintillator has been identified.
X- and Gamma-Ray spectroscopy measurements have been performed on differently prepared CdTe samples (as-grown or annealed, different surface treatments, etc.) with Pt electrodes deposited by ...electroless technique in order to extract the typical figures of merit of the material and the detectors. Moreover, Rutherford Backscattering Spectrometry (RBS) using 8 MeV ^{7}{\hbox {Li}}^{+++} ions and X-Ray Fluorescence (XRF) using a Pd-anode X-Ray generator were performed to characterize the crystal surface as well as the semiconductor-electrode interface. The thickness, the stoichiometry and the concentration profiles of platinum, cadmium and tellurium present at the surface layers were determined. The distribution of Cd deficiency at the interface layers was profiled using simulations and showed complex profiles in the samples, that can greatly affect the electrical quality of the detectors. In addition, resistivity and mu-tau product mapping and electrical measurements have been performed for material characterization. The aim of this work is to understand and improve the structure of the material-electrode interface; in particular, to understand the effect of the annealing process on the fabrication of the contacts and, at the end, on the performances of the detectors. For this reason a large number of detectors have been produced applying various chemical surface treatments on as-grown and annealed material, in order to determine the best routine way to fabricate high-quality X- and Gamma-ray detectors to be used both as large size planar detectors and as elements of imaging systems in medical or industrial applications.
VSiPMT a new photon detector Di Capua, F.; Barbarino, G.; Barbato, F.C.T. ...
EPJ Web of Conferences,
01/2016, Volume:
116
Journal Article, Conference Proceeding
Peer reviewed
Open access
Photon detection is a key factor to study many physical processes in several areas of fundamental physics research. Focusing the attention on photodetectors for particle astrophysics, the future ...experiments aimed at the study of very high-energy or extremely rare phenomena (e.g. dark matter, proton decay, neutrinos from astrophysical sources) will require additional improvements in linearity, gain, quantum efficiency and single photon counting capability. To meet the requirements of these class of experiments, we propose a new design for a modern hybrid photodetector: the VSiPMT (Vacuum Silicon PhotoMultiplier Tube). The idea is to replace the classical dynode chain of a PMT with a SiPM, which therefore acts as an electron detector and amplifier. The aim is to match the large sensitive area of a photocathode with the performances of the SiPM technology.