Heterojunction engineering, especially 2D/2D heterojunctions, is regarded as a quite promising strategy to manipulate the photocatalytic performance of semiconductor catalysts. In this manuscript, a ...direct Z‐scheme 2D/2D heterojunction of CsPbBr3/Bi2WO6 is designed and fabricated by a simple electrostatic self‐assembly process. By using ultrathin nanosheets with several atomic layers as the building blocks, a close CsPbBr3/Bi2WO6 heterointerface over large area with quite a short charge transport distance is obtained, which enables a valid Z‐scheme interfacial charge transfer between Bi2WO6 and CsPbBr3 and thus boosts charge separation. The CsPbBr3/Bi2WO6 heterojunction exhibits a superior photocatalytic performance toward CO2 reduction. By incorporating Pt nanoparticles as the cocatalyst, a high photoelectron consumption rate of 324.0 µmol g−1 h−1 under AM 1.5G irradiation (150 mW cm−2) is obtained, which is 12.2 fold higher than that of CsPbBr3 nanosheets. Moreover, a stable product yield of up to 1582.0 µmol g−1 and electron consumption yield of 8603.0 µmol g−1 for photocatalytic CO2 reduction to CO (11.4%) and CH4 (84.3%) can be achieved after 30 h of continuous catalytic reaction. The accelerated photogenerated charge transfer and spatial charge separation are investigated in detail by ultrafast spectra, photoelectrochemical test, and Kelvin probe force microscopy.
A Z‐Scheme 2D/2D heterojunction of CsPbBr3/Bi2WO6 is fabricated using a simple electrostatic assembly process. The as‐formed heterojunction possesses a large interface contact area and quite a short charge transport distance, which enable efficient Z‐scheme charge transfer and separation between Bi2WO6 and CsPbBr3, as well as remarkably enhanced performance toward photocatalytic CO2 reduction.
Following the first experimental realization of graphene, other ultrathin materials with unprecedented electronic properties have been explored, with particular attention given to the heavy group-IV ...elements Si, Ge and Sn. Two-dimensional buckled Si-based silicene has been recently realized by molecular beam epitaxy growth, whereas Ge-based germanene was obtained by molecular beam epitaxy and mechanical exfoliation. However, the synthesis of Sn-based stanene has proved challenging so far. Here, we report the successful fabrication of 2D stanene by molecular beam epitaxy, confirmed by atomic and electronic characterization using scanning tunnelling microscopy and angle-resolved photoemission spectroscopy, in combination with first-principles calculations. The synthesis of stanene and its derivatives will stimulate further experimental investigation of their theoretically predicted properties, such as a 2D topological insulating behaviour with a very large bandgap, and the capability to support enhanced thermoelectric performance, topological superconductivity and the near-room-temperature quantum anomalous Hall effect.
Low‐dimensional lead halide perovskite materials recently have drawn much attention owing to the intriguing broadband emissions; however, the toxicity of lead will hinder their future development. ...Now, a lead‐free (C4H14N2)2In2Br10 single crystal with a unique zero‐dimensional (0D) structure constituted by InBr63− octahedral and InBr4− tetrahedral units is described. The single crystal exhibits broadband photoluminescence (PL) that spans almost the whole visible spectrum with a lifetime of 3.2 μs. Computational and experimental studies unveil that an excited‐state structural distortion in InBr63− octahedral units enables the formation of intrinsic self‐trapped excitons (STEs) and thus contributing the broad emission. Furthermore, femtosecond transient absorption (fs‐TA) measurement reveals that the ultrafast STEs formation together with an efficient intersystem crossing has made a significant contribution to the long‐lived and broad STE‐based emission behavior.
A lead‐free indium‐based (C4H14N2)2In2Br10 single crystal was synthesized and characterized; it has a unique 0D crystal structure. An intrinsic self‐trapped exciton‐based ultra‐broad photoluminescence has been observed as a result of an excited‐state structural distortion in InBr63− octahedrons.
Low‐dimensional luminescent lead halide perovskites have attracted tremendous attention for their fascinating optoelectronic properties, while the toxicity of lead is still considered a drawback. ...Herein, we report a novel lead‐free zero‐dimensional (0D) indium‐based perovskite (Cs2InBr5⋅H2O) single crystal that is red‐luminescent with a high photoluminescence quantum yield (PLQY) of 33 %. Experimental and computational studies reveal that the strong PL emission might originate from self‐trapping excitons (STEs) that result from an excited‐state structural deformation. More importantly, the in situ transformation between hydrated Cs2InBr5⋅H2O and the dehydrated form is accompanied with a switchable dual emission, which enables it to act as a PL water‐sensor in humidity detection or the detection of traces of water in organic solvents.
Unleaded and unleashed: A highly emissive lead‐free indium‐based perovskite single crystal, Cs2InBr5⋅H2O, was successfully prepared. The versatile material is the first reversible metal halide perovskite photoluminescence water sensor and paves the way for the application of metal halide perovskites in water detection.
Developing bifunctional efficient and durable non-noble electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is highly desirable and challenging for overall ...water splitting. Herein, Co–Mn carbonate hydroxide (CoMnCH) nanosheet arrays with controllable morphology and composition were developed on nickel foam (NF) as such a bifunctional electrocatalyst. It is discovered that Mn doping in CoCH can simultaneously modulate the nanosheet morphology to significantly increase the electrochemical active surface area for exposing more accessible active sites and tune the electronic structure of Co center to effectively boost its intrinsic activity. As a result, the optimized Co1Mn1CH/NF electrode exhibits unprecedented OER activity with an ultralow overpotential of 294 mV at 30 mA cm–2, compared with all reported metal carbonate hydroxides. Benefited from 3D open nanosheet array topographic structure with tight contact between nanosheets and NF, it is able to deliver a high and stable current density of 1000 mA cm–2 at only an overpotential of 462 mV with no interference from high-flux oxygen evolution. Despite no reports about effective HER on metal carbonate hydroxides yet, the small overpotential of 180 mV at 10 mA cm–2 for HER can be also achieved on Co1Mn1CH/NF by the dual modulation of Mn doping. This offers a two-electrode electrolyzer using bifunctional Co1Mn1CH/NF as both anode and cathode to perform stable overall water splitting with a cell voltage of only 1.68 V at 10 mA cm–2. These findings may open up opportunities to explore other multimetal carbonate hydroxides as practical bifunctional electrocatalysts for scale-up water electrolysis.
Synthesizing antiferromagnets with correlated oxides has been challenging, owing partly to the markedly degraded ferromagnetism of the magnetic layer at nanoscale thicknesses. Here we report on the ...engineering of an antiferromagnetic interlayer exchange coupling (AF-IEC) between ultrathin but ferromagnetic La2/3Ca1/3MnO₃ layers across an insulating CaRu1/2Ti1/2O₃ spacer. The layer-resolved magnetic switching leads to sharp steplike hysteresis loops with magnetization plateaus depending on the repetition number of the stacking bilayers. The magnetization configurations can be switched at moderate fields of hundreds of oersted. Moreover, the AF-IEC can also be realized with an alternative magnetic layer of La2/3Sr1/3MnO₃ that possesses a Curie temperature near room temperature. The findings will add functionalities to devices with correlated-oxide interfaces.
Engineering non‐noble metal–based electrocatalysts with superior water oxidation performance is highly desirable for the production of renewable chemical fuels. Here, an atomically thin ...low‐crystallinity Fe–Mn–O hybrid nanosheet grown on carbon cloth (Fe–Mn–O NS/CC) is successfully synthetized as an efficient oxygen evolution reaction (OER) catalyst. The synthesis strategy involves a facile reflux reaction and subsequent low‐temperature calcination process, and the morphology and composition of hybrid nanosheets can be tailored conveniently. The defect‐rich Fe–Mn–O ultrathin nanosheet with uniform element distribution enables exposure of more catalytic active sites; moreover, the atomic‐scale synergistic action of Mn and Fe oxide contributes to an enhanced intrinsic catalytic activity. Therefore, the optimized Fe–Mn–O hybrid nanosheets, with lateral sizes of about 100–600 nm and ≈1.4 nm in thickness, enable a low onset potential of 1.46 V, low overpotential of 273 mV for current density of 10 mA cm−2, a small Tafel slope of 63.9 mV dec−1, and superior durability, which are superior to that of individual MnO2 and FeOOH electrode, and even outperforming most reported MnO2‐based electrocatalysts.
A defect‐rich Fe–Mn–O hybrid ultrathin nanosheet obtained by simple reflux and low‐temperature calcination route exhibits superior oxygen evolution reaction activity at alkaline media. The ultrathin nanosheets of ≈1.4 nm thick make it possible to expose more catalytic active sites; moreover, the atomic‐scale synergistic action of Mn and Fe oxide and defect‐rich structure contributes to an enhanced intrinsic catalytic activity.
Poly ADP-ribose polymerase inhibitor (PARPi) treatment is effective in triple-negative breast cancer (TNBC) with BRCA mutation. However, its efficacy in BRCA-proficient TNBC remains unexplored. It ...is, therefore, an exciting proposition to broaden the indication of PARPi for BRCA-proficient TNBC patients. Chemokine receptor (CXCR4) is a transmembrane G protein-coupled receptor, which is involved in cell migration, proliferation, apoptosis, and damage repair, and it initiates many signalling pathways. Although administration of CXCR4 inhibitor alone is not ideal as a target drug, it can play a strong synergistic role in combination with other drugs. We explored the effect of CXCR4 and PARP1 on tumour cell proliferation, migration, metastasis, and apoptosis in vitro and in vivo and found that a CXCR4 inhibitor, AMD3100, enhanced the anti-tumour effect of PARP1 inhibitor, olaparib, on BRCA-proficient TNBC. When CXCR4 was inhibited and silenced, DNA damage repair and DNA replication fork activity were suppressed by up-regulating caspase-3-mediated increase in PARP1 cleavage; in combination with the inhibition of PARP1, AMD3100 resulted in the accumulation of fatal DNA damage and induction of apoptosis. This combination regimen can be effective against BRCA-proficient TNBC.
•Efficacy of PARPi treatment remains unexplored for BRCA-proficient TNBC.•AMD3100 enhances the anti-tumour effect of olaparib on BRCA-proficient TNBC.•The combination of AMD3100 and olaparib results in DNA damage and apoptosis.•This combination can be useful for treating BRCA-proficient TNBC.
Halide perovskite single-crystals have recently been widely highlighted to possess high light harvesting capability and superior charge transport behaviour, which further enable their attractive ...performance in photovoltaics. However, their application in photoelectrochemical cells has not yet been reported. Here, a methylammonium lead bromide MAPbBr
single-crystal thin film is reported as a photoanode with potential application in photoelectrochemical organic synthesis, 2,5-dimethoxy-2,5-dihydrofuran. Depositing an ultrathin Al
O
layer is found to effectively passivate perovskite surface defects. Thus, the nearly 5-fold increase in photoelectrochemical performance with the saturated current being increased from 1.2 to 5.5 mA cm
is mainly attributed to suppressed trap-assisted recombination for MAPbBr
single-crystal thin film/Al
O
. In addition, Ti
-species-rich titanium deposition has been introduced not only as a protective film but also as a catalytic layer to further advance performance and stability. As an encouraging result, the photoelectrochemical performance and stability of MAPbBr
single-crystal thin film/Al
O
/Ti-based photoanode have been significantly improved for 6 h continuous dimethoxydihydrofuran evolution test with a high Faraday efficiency of 93%.
Abstract Polymeric materials, rich in carbon, hydrogen, and oxygen elements, present substantial fire hazards to both human life and property due to their intrinsic flammability. Overcoming this ...challenge in the absence of any flame-retardant elements is a daunting task. Herein, we introduce an innovative strategy employing catalytic polymer auto-pyrolysis before combustion to proactively release CO 2 , akin to possessing responsive CO 2 fire extinguishing mechanisms. We demonstrate that potassium salts with strong nucleophilicity (such as potassium formate/malate) can transform conventional polyurethane foam into materials with fire safety through rearrangement. This transformation results in the rapid generation of a substantial volume of CO 2 , occurring before the onset of intense decomposition, effectively extinguishing fires. The inclusion of just 1.05 wt% potassium formate can significantly raise the limiting oxygen index of polyurethane foam to 26.5%, increase the time to ignition by 927%, and tremendously reduce smoke toxicity by 95%. The successful application of various potassium salts, combined with a comprehensive examination of the underlying mechanisms, underscores the viability of this strategy. This pioneering catalytic approach paves the way for the efficient and eco-friendly development of polymeric materials with fire safety.