Mobile-edge computing (MEC) and wireless power transfer (WPT) have been recognized as promising techniques in the Internet of Things era to provide massive low-power wireless devices with enhanced ...computation capability and sustainable energy supply. In this paper, we propose a unified MEC-WPT design by considering a wireless powered multiuser MEC system, where a multiantenna access point (AP) (integrated with an MEC server) broadcasts wireless power to charge multiple users and each user node relies on the harvested energy to execute computation tasks. With MEC, these users can execute their respective tasks locally by themselves or offload all or part of them to the AP based on a time-division multiple access protocol. Building on the proposed model, we develop an innovative framework to improve the MEC performance, by jointly optimizing the energy transmit beamforming at the AP, the central processing unit frequencies and the numbers of offloaded bits at the users, as well as the time allocation among users. Under this framework, we address a practical scenario where latency-limited computation is required. In this case, we develop an optimal resource allocation scheme that minimizes the AP's total energy consumption subject to the users' individual computation latency constraints. Leveraging the state-of-the-art optimization techniques, we derive the optimal solution in a semiclosed form. Numerical results demonstrate the merits of the proposed design over alternative benchmark schemes.
Cooperative communication with single relay selection is a simple but effective communication scheme for energy-constrained networks. In this paper, we propose a novel selective single-relay ...cooperative scheme, combining selective-relay cooperative communication with physical-layer power control. Based on the MAC-layer RTS-CTS signaling, a set of potential relays compute individually the required transmission power to participate in the cooperative communication, and compete within a window of fixed length. The "best" relay is selected in a distributed fashion with minimum signaling overhead. We derive power-control solutions corresponding to two policies on relay selection: one is to minimize the energy consumption per data packet, and the other is to maximize the network lifetime. Our numerical and simulation results confirm that the proposed scheme achieves significant energy savings and prolongs the network lifetime considerably.
Spectrum sensing is an essential functionality that enables cognitive radios to detect spectral holes and to opportunistically use under-utilized frequency bands without causing harmful interference ...to legacy (primary) networks. In this paper, a novel wideband spectrum sensing technique referred to as multiband joint detection is introduced, which jointly detects the primary signals over multiple frequency bands rather than over one band at a time. Specifically, the spectrum sensing problem is formulated as a class of optimization problems, which maximize the aggregated opportunistic throughput of a cognitive radio system under some constraints on the interference to the primary users. By exploiting the hidden convexity in the seemingly nonconvex problems, optimal solutions can be obtained for multiband joint detection under practical conditions. The situation in which individual cognitive radios might not be able to reliably detect weak primary signals due to channel fading/shadowing is also considered. To address this issue by exploiting the spatial diversity, a cooperative wideband spectrum sensing scheme refereed to as spatial-spectral joint detection is proposed, which is based on a linear combination of the local statistics from multiple spatially distributed cognitive radios. The cooperative sensing problem is also mapped into an optimization problem, for which suboptimal solutions can be obtained through mathematical transformation under conditions of practical interest. Simulation results show that the proposed spectrum sensing schemes can considerably improve system performance. This paper establishes useful principles for the design of distributed wideband spectrum sensing algorithms in cognitive radio networks.
Wireless systems where the nodes operate on batteries so that energy consumption must be minimized while satisfying given throughput and delay requirements are considered. In this context, the best ...modulation strategy to minimize the total energy consumption required to send a given number of bits is analyzed. The total energy consumption includes both the transmission energy and the circuit energy consumption. For uncoded systems, by optimizing the transmission time and the modulation parameters, it is shown that up to 80% energy savings is achievable over nonoptimized systems. For coded systems, it is shown that the benefit of coding varies with the transmission distance and the underlying modulation schemes.
Cognitive radio technology has been proposed to improve spectrum efficiency by having the cognitive radios act as secondary users to opportunistically access under-utilized frequency bands. Spectrum ...sensing, as a key enabling functionality in cognitive radio networks, needs to reliably detect signals from licensed primary radios to avoid harmful interference. However, due to the effects of channel fading/shadowing, individual cognitive radios may not be able to reliably detect the existence of a primary radio. In this paper, we propose an optimal linear cooperation framework for spectrum sensing in order to accurately detect the weak primary signal. Within this framework, spectrum sensing is based on the linear combination of local statistics from individual cognitive radios. Our objective is to minimize the interference to the primary radio while meeting the requirement of opportunistic spectrum utilization. We formulate the sensing problem as a nonlinear optimization problem. By exploiting the inherent structures in the problem formulation, we develop efficient algorithms to solve for the optimal solutions. To further reduce the computational complexity and obtain solutions for more general cases, we finally propose a heuristic approach, where we instead optimize a modified deflection coefficient that characterizes the probability distribution function of the global test statistics at the fusion center. Simulation results illustrate significant cooperative gain achieved by the proposed strategies. The insights obtained in this paper are useful for the design of optimal spectrum sensing in cognitive radio networks.
This paper studies the wireless two-way relay channel (TWRC), where two source nodes, S1 and S2, exchange information through an assisting relay node, R. It is assumed that R receives the sum signal ...from S1 and S2 in one timeslot, and then amplifies and forwards the received signal to both S1 and S2 in the next time-slot. By applying the principle of analogue network coding (ANC), each of S1 and S2 cancels the so-called "self-interference" in the received signal from R and then decodes the desired message. Assuming that S1 and S2 are each equipped with a single antenna and R with multi-antennas, this paper analyzes the capacity region of the ANC-based TWRC with linear processing (beamforming) at R. The capacity region contains all the achievable bidirectional rate-pairs of S1 and S2 under the given transmit power constraints at S1, S2, and R. We present the optimal relay beamforming structure as well as an efficient algorithm to compute the optimal beamforming matrix based on convex optimization techniques. Low-complexity suboptimal relay beamforming schemes are also presented, and their achievable rates are compared against the capacity with the optimal scheme.
This paper considers the use of energy harvesters, instead of conventional time-invariant energy sources, in wireless cooperative communication. For the purpose of exposition, we study the classic ...three-node Gaussian relay channel with decode-and-forward (DF) relaying, in which the source and relay nodes transmit with power drawn from energy-harvesting (EH) sources. Assuming a deterministic EH model under which the energy arrival time and the harvested amount are known prior to transmission, the throughput maximization problem over a finite horizon of N transmission blocks is investigated. In particular, two types of data traffic with different delay constraints are considered: delay-constrained (DC) traffic (for which only one-block decoding delay is allowed at the destination) and no-delay-constrained (NDC) traffic (for which arbitrary decoding delay up to N blocks is allowed). For the DC case, we show that the joint source and relay power allocation over time is necessary to achieve the maximum throughput, and propose an efficient algorithm to compute the optimal power profiles. For the NDC case, although the throughput maximization problem is non-convex, we prove the optimality of a separation principle for the source and relay power allocation problems, based upon which a two-stage power allocation algorithm is developed to obtain the optimal source and relay power profiles separately. Furthermore, we compare the DC and NDC cases, and obtain the sufficient and necessary conditions under which the NDC case performs strictly better than the DC case. It is shown that NDC transmission is able to exploit a new form of diversity arising from the independent source and relay energy availability over time in cooperative communication, termed "energy diversity", even with time-invariant channels.
In this article, the problem of training federated learning (FL) algorithms over a realistic wireless network is studied. In the considered model, wireless users execute an FL algorithm while ...training their local FL models using their own data and transmitting the trained local FL models to a base station (BS) that generates a global FL model and sends the model back to the users. Since all training parameters are transmitted over wireless links, the quality of training is affected by wireless factors such as packet errors and the availability of wireless resources. Meanwhile, due to the limited wireless bandwidth, the BS needs to select an appropriate subset of users to execute the FL algorithm so as to build a global FL model accurately. This joint learning, wireless resource allocation, and user selection problem is formulated as an optimization problem whose goal is to minimize an FL loss function that captures the performance of the FL algorithm. To seek the solution, a closed-form expression for the expected convergence rate of the FL algorithm is first derived to quantify the impact of wireless factors on FL. Then, based on the expected convergence rate of the FL algorithm, the optimal transmit power for each user is derived, under a given user selection and uplink resource block (RB) allocation scheme. Finally, the user selection and uplink RB allocation is optimized so as to minimize the FL loss function. Simulation results show that the proposed joint federated learning and communication framework can improve the identification accuracy by up to 1.4%, 3.5% and 4.1%, respectively, compared to: 1) An optimal user selection algorithm with random resource allocation, 2) a standard FL algorithm with random user selection and resource allocation, and 3) a wireless optimization algorithm that minimizes the sum packet error rates of all users while being agnostic to the FL parameters.
In this correspondence, we study the downlink transmission in a multi-cell system, where multiple base stations (BSs) each with multiple antennas cooperatively design their respective transmit ...beamforming vectors to optimize the overall system performance. For simplicity, it is assumed that all mobile stations (MSs) are equipped with a single antenna each, and there is one active MS in each cell at one time. Accordingly, the system of interests can be modeled by a multiple-input single-output (MISO) Gaussian interference channel (IC), termed as MISO-IC, with interference treated as noise. We propose a new method to characterize different rate-tuples for active MSs on the Pareto boundary of the achievable rate region for the MISO-IC, by exploring the relationship between the MISO-IC and the cognitive radio (CR) MISO channel. We show that each Pareto-boundary rate-tuple of the MISO-IC can be achieved in a decentralized manner when each of the BSs attains its own channel capacity subject to a certain set of interference-power constraints (also known as interference-temperature constraints in the CR system) at the other MS receivers. Furthermore, we show that this result leads to a new decentralized algorithm for implementing the multi-cell cooperative downlink beamforming.
In this paper, we consider a clustered wireless sensor network where sensors within each cluster relay data packets to nearby clusters using cooperative communications. We propose a cooperative ...transmission scheme based on distributed space-time block coding and conduct a systematic analysis on the resulting energy consumption. Compared with existing work, our distinctions are twofold: (1) Only sensors that can correctly decode received packets participate in the cooperative transmission, where the number of cooperating nodes depends on both channel and noise realizations; and (2) we use packet-error-rate-based analysis rather than symbol-error-rate-based analysis. This is more realistic since error detection is usually done at the packet level via, e.g., cyclic-redundancy-check codes. Based on the analysis, we further minimize the overall energy consumption by power allocation between the intracluster and intercluster transmissions. With numerical methods, we investigate how energy consumption is affected by the transmit power allocation, the total number of sensors in a cluster, the end-to-end packet error rate requirement, and the relative magnitudes between the intracluster and intercluster distances. Comparisons with direct (noncooperative) transmission schemes demonstrate the significant energy-saving advantage of the proposed cooperative scheme.
PDF
