Performance of the LHCb VELO Dossett, D.
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
08/2013, Volume:
718
Journal Article
Peer reviewed
Open access
LHCb is a dedicated experiment to search for new physics in the decays of beauty and charm hadrons at the Large Hadron Collider (LHC) at CERN. Measurement of the flight distance of these hadrons is ...critical for the physics programme. The Vertex Locator (VELO) is a silicon micro-strip detector which surrounds the LHCb interaction point and provides μm resolution of charged tracks and vertex positions. The VELO has been run successfully for the 2010 and 2011 LHC physics runs. Operational results show a signal-to-noise ratio of approximately 20 and a best hit resolution of 4μm.
Radiation damage in the LHCb VELO Dossett, D.
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
08/2013, Volume:
718
Journal Article
Peer reviewed
Open access
LHCb is a dedicated experiment to study new physics in the decays of beauty and charm hadrons at the Large Hadron Collider (LHC) at CERN. The Vertex Locator (VELO) is a silicon micro-strip detector ...which surrounds the LHCb interaction point and provides μm resolution of charged tracks and vertex positions. The tip of the VELO sensors is predicted to receive a dose of 0.5×1013 1-MeV neq/cm2 per fb of data. The highest fluence of any silicon tracker at the four major LHC experiments. Radiation damage studies have been carried out during the first two years of data taking at LHCb for all 88 sensors of the VELO. Radiation damage has been observed in all sensors, with those sensors in the highest fluence regions showing evidence of type inversion. Radiation induced charge loss due to the second metal layer on the sensors is also observed.
School and district leaders make annual decisions about investing their budgets in a multitude of educational programs. Policy directives set expectations for investing in programs that show evidence ...of improving student outcomes. However, evaluating many simultaneously-implemented programs under typical school operating conditions is challenging. We investigated three methods - cost-effectiveness analysis, program value-added analysis, and academic return on investment - to assess how each one fares against three criteria: rigor of methodology, difficulty of execution, and usability of results for decision-making. We apply each method to three programs implemented in a large, U.S. school district: Reading Recovery, Restorative Practices, and school nurses.
The Belle II detector at the Super KEKB e+e−collider plans to take first collision data in 2018. The monetary and CPU time costs associated with storing and processing the data mean that it is ...crucial for the detector components at Belle II to be calibrated quickly and accurately. A fast and accurate calibration system would allow the high level trigger to increase the efficiency of event selection, and can give users analysis-quality reconstruction promptly. A flexible framework to automate the fast production of calibration constants is being developed in the Belle II Analysis Software Framework (basf2). Detector experts only need to create two components from C++ base classes in order to use the automation system. The first collects data from Belle II event data files and outputs much smaller files to pass to the second component. This runs the main calibration algorithm to produce calibration constants ready for upload into the conditions database. A Python framework coordinates the input files, order of processing, and submission of jobs. Splitting the operation into collection and algorithm processing stages allows the framework to optionally parallelize the collection stage on a batch system.
The Belle II collaboration decided in 2016 to migrate its collaborative services and tools into the existing IT infrastructure at DESY. The goal was to reduce the maintenance effort for solutions ...operated by Belle II members as well as to deploy state-of-art technologies. In addition, some new services and tools were or will be introduced. Planning and migration work was carried out by small teams consisting of experts form Belle II and the involved IT divisions. The migration was successfully accomplished before the KEK computer centre replacement in August 2016.
The branching fraction ratio R(D^{*})≡B(Bover ¯^{0}→D^{*+}τ^{-}νover ¯_{τ})/B(Bover ¯^{0}→D^{*+}μ^{-}νover ¯_{μ}) is measured using a sample of proton-proton collision data corresponding to 3.0 ...fb^{-1} of integrated luminosity recorded by the LHCb experiment during 2011 and 2012. The tau lepton is identified in the decay mode τ^{-}→μ^{-}νover ¯_{μ}ν_{τ}. The semitauonic decay is sensitive to contributions from non-standard-model particles that preferentially couple to the third generation of fermions, in particular, Higgs-like charged scalars. A multidimensional fit to kinematic distributions of the candidate Bover ¯^{0} decays gives R(D^{*})=0.336±0.027(stat)±0.030(syst). This result, which is the first measurement of this quantity at a hadron collider, is 2.1 standard deviations larger than the value expected from lepton universality in the standard model.
A measurement of the ratio of the branching fractions of the B(+) → K(+)μ(+)μ(-) and B(+) → K(+)e(+)e(-) decays is presented using proton-proton collision data, corresponding to an integrated ...luminosity of 3.0 fb(-1), recorded with the LHCb experiment at center-of-mass energies of 7 and 8 TeV. The value of the ratio of branching fractions for the dilepton invariant mass squared range 1 < q(2) < 6 GeV(2)/c(4) is measured to be 0.745(-0.074)(+0.090)(stat) ± 0.036(syst). This value is the most precise measurement of the ratio of branching fractions to date and is compatible with the standard model prediction within 2.6 standard deviations.
A
bstract
We present measurements of the branching fractions for the decays
B
→
Kμ
+
μ
−
and
B
→
Ke
+
e
−
, and their ratio (
R
K
), using a data sample of 711 fb
−
1
that contains 772 × 10
6
B
B
¯
...events. The data were collected at the ϒ(4
S
) resonance with the Belle detector at the KEKB asymmetric-energy
e
+
e
−
collider. The ratio
R
K
is measured in five bins of dilepton invariant-mass-squared (
q
2
):
q
2
∈ (0
.
1
,
4
.
0)
,
(4
.
00
,
8
.
12)
,
(1
.
0
,
6
.
0), (10
.
2
,
12
.
8) and (
>
14
.
18) GeV
2
/c
4
, along with the whole
q
2
region. The
R
K
value for
q
2
∈ (1
.
0
,
6
.
0) GeV
2
/c
4
is
1.03
−
0.24
+
0.28
± 0
.
01. The first and second uncertainties listed are statistical and systematic, respectively. All results for
R
K
are consistent with Standard Model predictions. We also measure
CP
-averaged isospin asymmetries in the same
q
2
bins. The results are consistent with a null asymmetry, with the largest difference of 2.6 standard deviations occurring for the
q
2
∈ (1
.
0
,
6
.
0) GeV
2
/c
4
bin in the mode with muon final states. The measured differential branching fractions,
d
ℬ
/dq
2
, are consistent with theoretical predictions for charged
B
decays, while the corresponding values are below the expectations for neutral
B
decays. We have also searched for lepton-flavor-violating
B
→
Kμ
±
e
∓
decays and set 90% confidence-level upper limits on the branching fraction in the range of 10
−
8
for
B
+
→
K
+
μ
±
e
∓
, and
B
0
→
K
0
μ
±
e
∓
modes.
The Belle II Physics Book Kou, E; Bishara, F; Brod, J ...
Progress of theoretical and experimental physics,
12/2019, Volume:
2019, Issue:
12
Journal Article
Peer reviewed
Open access
We present the physics program of the Belle II experiment, located on the intensity frontier SuperKEKB e+e- collider. Belle II collected its first collisions in 2018, and is expected to operate for ...the next decade. It is anticipated to collect 50/ab of collision data over its lifetime. This book is the outcome of a joint effort of Belle II collaborators and theorists through the Belle II theory interface platform (B2TiP), an effort that commenced in 2014. The aim of B2TiP was to elucidate the potential impacts of the Belle II program, which includes a wide scope of physics topics: B physics, charm, tau, quarkonium, electroweak precision measurements and dark sector searches. It is composed of nine working groups (WGs), which are coordinated by teams of theorist and experimentalists conveners: Semileptonic and leptonic B decays, Radiative and Electroweak penguins, φ1 and φ2 (time-dependent CP violation) measurements, φ3 measurements, Charmless hadronic B decay, Charm, Quarkonium(like), tau and low-multiplicity processes, new physics and global fit analyses. This book highlights "golden- and silver-channels", i.e. those that would have the highest potential impact in the field. Theorists scrutinised the role of those measurements and estimated the respective theoretical uncertainties, achievable now as well as prospects for the future. Experimentalists investigated the expected improvements with the large dataset expected from Belle II, taking into account improved performance from the upgraded detector.
Observations of exotic structures in the J/ψp channel, which we refer to as charmonium-pentaquark states, in Λ_{b}^{0}→J/ψK^{-}p decays are presented. The data sample corresponds to an integrated ...luminosity of 3 fb^{-1} acquired with the LHCb detector from 7 and 8 TeV pp collisions. An amplitude analysis of the three-body final state reproduces the two-body mass and angular distributions. To obtain a satisfactory fit of the structures seen in the J/ψp mass spectrum, it is necessary to include two Breit-Wigner amplitudes that each describe a resonant state. The significance of each of these resonances is more than 9 standard deviations. One has a mass of 4380±8±29 MeV and a width of 205±18±86 MeV, while the second is narrower, with a mass of 4449.8±1.7±2.5 MeV and a width of 39±5±19 MeV. The preferred J^{P} assignments are of opposite parity, with one state having spin 3/2 and the other 5/2.
PDF
