Abstract
The realization of mathematical, multi-physics models for alkaline electrolyzers is crucial for advancing this technology. Lumped parameter models offer shorter simulation times, compared ...with other approaches, and practical industrial applications. If electrochemical models provide the polarization curve, the hydrogen production rate, and the device efficiency, thermal models solve the equations involving the electrolyte temperature. With a coupled approach, the two models can be linked together by considering the device voltage as temperature dependent. Despite the relevance of such models, few instances of their direct application on existing electrolyzers can be found in the literature, and combined electrochemical-thermal simulations are rare.
This study presents a multi-physics model applied on an alkaline electrolyzer and validated against measurements acquired on a dedicated experimental test bench.
The physics-based model accurately predicts the polarization curve, exhibiting a high precision match with experimental data. Additionally, it identifies material or geometrical imperfections in the electrolyzer, allowing for optimization in the design phase. The thermal model successfully converges to the desired electrolyte temperature of 72 °C under stationary conditions. Additional transient simulations demonstrate an average deviation of only 0.25% compared to the measured temperature trend. Finally, a sensitivity analysis explores the coupling of the electrolyzer with a wind turbine under different wind conditions.
The study showcases the effectiveness of the coupled electrochemical-thermal model in predicting electrolyzer performance, with a direct application to a wind turbine power output.
In this study, the performance of a free software for automatic segmentation of striatal SPECT brain studies (BasGanV2 – www.aimn.it) and a standard manual Region Of Interest (ROI) method were ...compared. The anthropomorphic Alderson RSD phantom, filled with solutions at different concentration of 123I-FP-CIT with Caudate-Putamen to Background ratios between 1 and 8.7 and Caudate to Putamen ratios between 1 and 2, was imaged on a Philips-Irix triple head gamma camera. Images were reconstructed using filtered back-projection and processed with both BasGanV2, that provides normalized striatal uptake values on volumetric anatomical ROIs, and a manual method, based on average counts per voxel in ROIs drawn in a three-slice section. Caudate-Putamen/Background and Caudate/Putamen ratios obtained with the two methods were compared with true experimental ratios. Good correlation was found for each method; BasGanV2, however, has higher R index (BasGan Rmean 0.95, p < 0.001) than the ROI method (Rmean 0.89, p < 0.005). The results obtained suggest that this new software can be suitable in daily practice, being an accurate, simple, fully automatic and reproducible method of semiquantitative analysis of 123I-FP-CIT SPECT data with, moreover, the advantage of the availability of a control subject's database.
This study aimed at assessing the impact of attenuation correction performed by means of a new hardware device (Beacon(tm)) in the assessment of coronary artery disease with myocardial SPECT and, ...afterwards, at identifying what specific risk class of patients would mostly benefit from the technique.
The first 500 consecutive patients, referred to our facility for coronary artery disease (CAD) assessment, were included in this study. Myocardial SPECT was performed after i.v. of 740 MBq of (99m)Tc Tetrofosmin (Myoview, Amersham Health) both after stress and at rest. Studies were acquired by means of a 3 head system (IRIX, Philips Medical System) equipped with the Beacontm option to correct for non-uniform attenuation. Out of the whole population studied, 130 patients underwent coronary angiography (CAG), 108 of which were proven to be affected by significant CAD, defined as a >50% coronary vessel lumen reduction. Attenuation corrected (AC) as well as non-attenuation corrected studies (NAC) were reconstructed, blindly read and qualified as: normal; borderline normal; borderline abnormal and definitely abnormal.
In the group of 130 patients who underwent CAG, sensitivity for CAD detection did not vary significantly (96% and 93%, for NAC and AC studies, respectively, p=ns) whereas specificity increased from 73% (NAC studies) to 91% (AC studies), p<0.01. Normalcy rate, assessed in a small subgroup (n=21) with a <5% likelihood for CAD, was found to be 80% for NAC studies vs 93% for AC studies (p<0.05). As regards synthetic clinical judgements, when we grouped normal and probably normal readings into a single ''normal'' category and, conversely, probably abnormal and definitely abnormal into a single ''pathological'' category, we see that after attenuation correction studies reported as ''pathological'' are reclassified as ''normal'' in 17.8% of the cases (25.2% in males and 6.9% in females, p<0.05). The opposite is seen in only 1.6% of the cases (1.3% in males and 4.4% in females). According to established criteria, 155 patients were classified at low risk for CAD (<15%), 115 at intermediate risk (from >15% to <50%) and 230 at high risk (>50%). The intermediate risk class showed the greatest impact: ''normal'' findings increased from 52% to 72%, thus reducing the rate of ''pathological'' reports from 48% to 28%.
This study shows that, while sensitivity for CAD is not affected by attenuation correction, specificity increases significantly, as well as normalcy rate. Out of the whole population studied, the main finding was that attenuation correction increases the rate of normal reports, more frequently in males than in females, and that studies carried out in patients at intermediate risk for CAD are more likely to be affected.
The purpose of this study was to evaluate whether bile acid malabsorption assessed by the 75SeHCAT test, had a pathogenetic role in functional chronic diarrhoea and to ascertain whether the small ...bowel transit time (SBTT) could be correlated with the 75SeHCAT test results. The test was based on the counting of the abdominal retention of a 75-selenium labelled homotaurocholic acid. The 75SeHCAT test was carried out in a control group of 23 healthy adults and in 46 patients, 38 of whom were suffering from irritable bowel syndrome (IBS) of diarrhoeic form and eight patients who had undergone cholecystectomy and were suffering from chronic diarrhoea. Faecal bile acid loss was determined in nine patients, and in 14, serum bile acid increase after a standard meal was measured. In 17, SBTT was studied by hydrogen breath test after lactulose administration (21 g in 300 ml water). In 15 patients, choledochocaecal transit time was estimated by Tc99m-HIDA (111 MBq) cholescintigraphy. In 20 of 46 subjects, 75SeHCAT retention was below normal level, and in 19 cholestyramine administration relieved diarrhoea. 75SeHCAT results were related to faecal bile acid loss, while no correlation was found with serum bile acids and SBTT. The data suggest a possible wider use of the 75SeHCAT test in chronic diarrhoea to estimate bile acid malabsorption in irritable bowel syndrome, diarrhoeic form, and provide an effective treatment. In our patients small bowel transit velocity does not seem to be a pathogenetic factor of bile acid malabsorption.
The study aimed to evaluate the safety and reliability of captopril renal scintigraphy (CRS) for diagnosing functionally significant renal artery stenosis (RAS) in hypertensive patients with a ...solitary kidney. Radionuclide studies were carried out using 100 MBq 99Tcm-mercaptoacetyl triglycine (MAG3), 1 h after administration of 50 mg captopril, and repeated in baseline condition when abnormalities were observed in the provocative study. Scintigraphic diagnosis of RAS was based on analysis of captopril-induced changes of the radiorenographs. Overall, 12 patients with a solitary kidney were investigated, and scintigraphic results compared to angiographic findings. All five patients with positive CRS showed an RAS > 50%, whereas only one of the seven patients with negative CRS was affected by RAS. A significant fall in mean arterial pressure was recorded after captopril administration (123 +/- 12 mm Hg before versus 108 +/- 11 after), but no serious side effects were observed. Our results demonstrate that captopril-induced modifications of the renogram could effectively be used to diagnose the presence of RAS. Captopril renal scintigraphy may therefore be suggested as a reliable and safe noninvasive approach to evaluate hypertensive patients with a solitary kidney.
Cadmium in blood (CdB), cadmium in urine (CdU) and beta 2-microglobulins (beta 2MU) were determined in 83 male workers exposed to cadmium fumes. CdU was measured both on 24-h urine samples and on ...spot samples. The behaviour of the biological indicators of cadmium was assessed in relation to degree of current exposure, length of exposure and cumulative exposure (computed as concentration of cadmium at the workplace multiplied by duration of exposure). CdB values were significantly higher in the subgroups of subjects with higher current cadmium exposure and in the subgroups of subjects with greater cumulative exposure, but the test levels were not influenced by duration of exposure. CdU levels were significantly higher in the subgroup of subjects with greater cumulative exposure, but were less influenced by current exposure or duration of exposure. Considering the entire population, a rather close correlation (r = 0.69) was observed between CdB and CdU. When the population was divided according to level of current exposure, a close relationship was observed between the two indicators in all subgroups; nevertheless, for identical CdU values, the CdB values were higher in the subjects with heavier current exposure. Even if in all Cd workers the beta 2MU levels were in the range of reference values, the highest beta 2MU levels were found in the subjects with CdU greater than 10 micrograms/l. The data confirm that CdU is prevalently influenced by the body burden of metal, but they also suggest that the CdB levels are not influenced solely by the intensity of current exposure but also depend to a considerable degree on the body burden.
The authors report the data obtained in a bone scan study conducted in 15 patients with cementless total hip arthroplasty. The study was conducted a minimum of 6 months and a maximum of 46 months ...postsurgery. Contrary to what occurs for cemented prostheses, we used bone scan not as a diagnostic aid for complications, but in order to evaluate the osteogenetic response of the bone to a cementless prosthetic implant. Zonal bone scan high uptake revealed specific areas of overloading, or, when localized in the para-articular region, they anticipated the presence of ossifications before they became visible radiographically. Bone scan was also useful in monitoring the incorporation and remodelling phases of the auto and/or homoplastic bone grafts used.
PDF
