Deformation twinning in pure aluminum has been considered to be a unique property of nanostructured aluminum. A lingering mystery is whether deformation twinning occurs in coarse-grained or ...single-crystal aluminum at scales beyond nanotwins. Here, we present the first experimental demonstration of macrodeformation twins in single-crystal aluminum formed under an ultrahigh strain rate (∼10^{6} s^{-1}) and large shear strain (200%) via dynamic equal channel angular pressing. Large-scale molecular dynamics simulations suggest that the frustration of subsonic dislocation motion leads to transonic deformation twinning. Deformation twinning is rooted in the rate dependences of dislocation motion and twinning, which are coupled, complementary processes during severe plastic deformation under ultrahigh strain rates.
We study the process e^{+}e^{-}→Λ_{c}^{+}Λover ¯_{c}^{-} at twelve center-of-mass energies from 4.6119 to 4.9509 GeV using data samples collected by the BESIII detector at the BEPCII collider. The ...Born cross sections and effective form factors (|G_{eff}|) are determined with unprecedented precision after combining the single and double-tag methods based on the decay process Λ_{c}^{+}→pK^{-}π^{+}. Flat cross sections around 4.63 GeV are obtained and no indication of the resonant structure Y(4630), as reported by Belle, is found. In addition, no oscillatory behavior is discerned in the |G_{eff}| energy dependence of Λ_{c}^{+}, in contrast to what is seen for the proton and neutron cases. Analyzing the cross section together with the polar-angle distribution of the Λ_{c}^{+} baryon at each energy point, the moduli of electric and magnetic form factors (|G_{E}| and |G_{M}|) are extracted and separated. For the first time, the energy dependence of the form factor ratio |G_{E}/G_{M}| is observed, which can be well described by an oscillatory function.
Deformation twinning plays a vital role in accommodating plastic deformation of hexagonal-close-packed (hcp) metals, but its mechanisms are still unsettled under high strain rate shock compression. ...Here we investigate deformation twinning in shock-compressed Mg as a typical hcp metal with in situ, ultrafast synchrotron x-ray diffraction. Extension twinning occurs upon shock compression along ⟨112over ¯0⟩ and ⟨101over ¯0⟩, but only upon release for loading along ⟨0001⟩. Such deformation mechanisms are a result of the polarity of deformation twinning, which depends on directionality and relative magnitude of resolved shear stress and may be common for Mg and its alloys in a wide range of strain rates.
Galectin-1 (Gal-1) is involved in several pathological activities associated with tumor progression and chemoresistance, however, the role and molecular mechanism of Gal-1 activity in hepatocellular ...carcinoma (HCC) epithelial-mesenchymal transition (EMT) and sorafenib resistance remain enigmatic. In the present study, forced Gal-1 expression promoted HCC progression and sorafenib resistance. Gal-1 elevated αvβ3-integrin expression, leading to AKT activation. Moreover, Gal-1 overexpression induced HCC cell EMT via PI3K/AKT cascade activation. Clinically, our data revealed that Gal-1 overexpression is correlated with poor HCC survival outcomes and sorafenib response. These data suggest that Gal-1 may be a potential therapeutic target for HCC and a biomarker for predicting response to sorafenib treatment.
Summary
Background
Serum vitamin D levels are associated with bone complications in patients with primary biliary cirrhosis (PBC). Increasing evidence suggests a nonskeletal role of vitamin D in ...various autoimmune and liver diseases.
Aim
To investigate the clinical relevance of vitamin D levels in PBC, especially their association with the therapeutic effects of ursodeoxycholic acid (UDCA).
Methods
Consecutive PBC patients were retrospectively reviewed. 25‐hydroxyvitamin D 25(OH)D levels were determined in frozen serum samples collected before initiation of UDCA treatment. Response to UDCA was evaluated by Paris‐I and Barcelona criteria. Logistic regressions were performed to identify the treatment response‐associated parameters.
Results
Among 98 patients, the mean serum 25(OH)D concentration was 17.9 ± 7.6 ng/mL. 25(OH)D levels decreased with increasing histological stage (P = 0.029) and were negatively correlated with bilirubin and alkaline phosphatase levels. After 1 year of UDCA therapy, 31 patients failed to achieve complete response according to Paris‐I criteria. The baseline 25(OH)D level was significantly lower in nonresponders (14.8 ± 6.4 vs. 19.3 ± 7.6 ng/mL, P = 0.005). Vitamin D deficiency at baseline was associated with an increased risk of incomplete response independent of advanced stages (OR = 3.93, 95% CI = 1.02–15.19, P = 0.047). Similar results were obtained when biochemical response was evaluated by Barcelona criteria. Furthermore, 25(OH)D levels were lower in patients who subsequently suffered death or liver transplantation (12.1 ± 4.6 vs. 18.4 ± 7.6 ng/mL, P = 0.023).
Conclusions
25(OH)D level is associated with biochemical and histological features in PBC. Pre‐treatment vitamin D status is independently related to subsequent response to UDCA. Our results suggest that vitamin D status may have important clinical significance in PBC.
The seed of
Psoralea corylifolia L. (PCL), a well-known traditional Chinese medicine, has been applied as a tonic or an aphrodisiac agent and commonly used as a remedy for bone fracture, osteomalacia ...and osteoporosis in China. In our study, the estrogen receptor subtype-selective activities of the extracts and compounds derived from PCL were analyzed using the HeLa cell assay. The different fractions including petroleum ether, CH
2Cl
2 and EtOAc fractions of the EtOH extract of PCL showed significant activity in activating either ERα or ERβ whereas the
n-BuOH fraction showed no estrogenic activity. Further chromatographic purification of the active fractions yielded seven compounds including the two coumarins isopsoralen and psoralen, the four flavonoids isobavachalcone, bavachin, corylifol A and neobavaisoflavone, and the meroterpene phenol, bakuchiol. In reporter gene assay, the two coumarins (10
−8-10
−5
M) acted as ERα-selective agonists while the other compounds (10
−9-10
−6
M) activated both ERα and ERβ. The estrogenic activities of all compounds could be completely suppressed by the pure estrogen antagonist, ICI 182,780, suggesting that the compounds exert their activities through ER. Only psoralen and isopsoralen as ERα agonists promoted MCF-7 cell proliferation significantly. Although all the compounds have estrogenic activity, they may exert different biological effects. In conclusion, both ER subtype-selective and nonselective activities in compounds derived from PCL suggested that PCL could be a new source for selective estrogen-receptor modulators.
Drosophila suzukii (spotted wing drosophila) has become a major invasive insect pest of soft fruits in the America and Europe, causing severe yield losses every year. The female D. suzukii shows the ...oviposition preference for ripening or ripe fruit by cutting the hard skin with its serrated ovipositor. A recent study reported that mechanosensation is involved in the texture discrimination during egg‐laying behaviour in D. suzukii. However, the underlying mechanism and molecular entity that control this behaviour are not known. The transient receptor potential (TRP) channels and degenerin/epithelial sodium channels (DEG/ENaC) are two candidate gene families of mechanically activated ion channels. Thus, we first identified TRP and DEG/ENaC genes in D. suzukii by bioinformatic analysis. Using transcriptome sequencing, we found that many TRP genes were expressed in the ovipositor in both D. suzukii and D. melanogaster, while some DEG/ENaCs showed species‐specific expression patterns. Exposure to drugs targeting TRP and DEG/ENaC channels abolished the oviposition preference for harder texture in female D. suzukii. Therefore, mechanosensitive ion channels may play significant roles in the texture assessment of egg‐laying behaviour in D. suzukii, which has promising implications to further research on the development of novel control measures.
First report on the mechanosensitive ion channels in the insect ovipositor by genomic and ovipositor transcriptome analysis.
The TRP and DEG/ENaC families are the main mechanosensitive channels expressed in the ovipositor. Pharmacological blockage of mechanosensitive ion channels impaired oviposition preference in D. suzukii.
Nonstoichiometric Mg2SiO4 forsterite dielectric ceramics with various Mg/Si ratios (R=2.025, 2.05, and 2.2) were prepared and characterized. The appearance of a MgSiO3 secondary phase could be ...effectively suppressed by adjusting the nonstoichiometry, and a single‐phase forsterite structure was obtained in the present ceramics with Mg/Si ratios of 2.025 and 2.05. The microwave dielectric characteristics were significantly improved in the nonstoichiometric Mg2SiO4 ceramics on eliminating the MgSiO3 secondary phase, where an enhanced Q×f value and a suppressed temperature coefficient of resonant frequency λf were obtained. The best microwave characteristics were achieved in the nonstoichiometric forsterite ceramics with an Mg/Si ratio of 2.05: ɛr=7.5, Q×f=114 730 GHz, and λf=−59 ppm/°C.
As the world's largest coal producer, China was accounted for about 46% of global coal production. Among present coal mining risks, methane gas (called gas in this paper) explosion or ignition in an ...underground mine remains ever-present. Although many techniques have been used, gas accidents associated with the complex elements of underground gassy mines need more robust monitoring or warning systems to identify risks. This paper aimed to determine which single method between the PCA and Entropy methods better establishes a responsive weighted indexing measurement to improve coal mining safety.
Qualitative and quantitative mixed research methodologies were adopted for this research, including analysis of two case studies, correlation analysis, and comparative analysis. The literature reviewed the most-used multi-criteria decision making (MCDM) methods, including subjective methods and objective methods. The advantages and disadvantages of each MCDM method were briefly discussed. One more round literature review was conducted to search publications between 2017 and 2019 in CNKI. Followed two case studies, correlation analysis and comparative analysis were then conducted. Research ethics was approved by the Shanxi Coking Coal Group Research Committee.
The literature searched a total of 25,831publications and found that the PCA method was the predominant method adopted, and the Entropy method was the second most widely adopted method. Two weighting methods were compared using two case studies. For the comparative analysis of Case Study 1, the PCA method appeared to be more responsive than the Entropy. For Case Study 2, the Entropy method is more responsive than the PCA. As a result, both methods were adopted for different cases in the case study mine and finally deployed for user acceptance testing on 5 November 2020.
The findings and suggestions were provided as further scopes for further research. This research indicated that no single method could be adopted as the better option for establishing indexing measurement in all cases. The practical implication suggests that comparative analysis should always be conducted on each case and determine the appropriate weighting method to the relevant case. This research recommended that the PCA method was a dimension reduction technique that could be handy for identifying the critical variables or factors and effectively used in hazard, risk, and emergency assessment. The PCA method might also be well-applied for developing predicting and forecasting systems as it was sensitive to outliers. The Entropy method might be suitable for all the cases requiring the MCDM. There is also a need to conduct further research to probe the causal reasons why the PCA and Entropy methods were applied to each case and not the other way round. This research found that the Entropy method provides higher accuracy than the PCA method. This research also found that the Entropy method demonstrated to assess the weights of the higher dimension dataset was higher sensitivity than the lower dimensions. Finally, the comprehensive analysis indicates a need to explore a more responsive method for establishing a weighted indexing measurement for warning applications in hazard, risk, and emergency assessments.
Summary
To study the cost of osteoporotic fracture in China, we performed a prospective study and compared the costs of the disease in referral patients with fractures in three of the most common ...sites. Our results indicated that the economic burden of osteoporotic fracture to both Chinese patients and the nation is heavy.
Introduction
This paper aims to study the cost of osteoporotic fracture in China and thus to provide essential information about the burden of this disease to individuals and society.
Methods
This prospective observational data collection study assessed the cost related to hip, vertebral, and wrist fracture 1 year after the fracture based on a patient sample consisting of 938 men and women. Information was collected using patient records, registry sources, and patient interviews. Both direct medical, direct non-medical, and indirect non-medical costs were considered.
Results
The annual total costs were highest in hip fracture patients (renminbi, RMB 27,283 or USD 4,330, with confidence interval (RMB 25715, 28851)), followed by patients with vertebral fracture (RMB 21,474 or USD 3,409, with confidence interval (RMB 20082, 22866)) and wrist fracture (RMB 8,828 or USD 1,401, with confidence interval (RMB 7829, 9827)). The direct medical care costs averaged approximately RMB 17,007 per year per patient, of which inpatient costs, drugs, and investigations accounted for the majority of the costs. Nonmedical direct costs were much less compared to direct healthcare costs and averaged approximately RMB 1,846.
Conclusion
These results indicate that the economic burden of osteoporotic fracture to both Chinese patients and China was heavy, and the proportion of the costs in China demonstrated many similar features and some significant differences compared to other countries.