The interaction between rainfall erosivity parameters and splash erosion is crucial for describing the soil erosion process; however, it is rarely investigated under natural rainfall conditions. In ...this study, we conducted splash erosion experiments under natural rainfall on three sites in Central Europe. The main goal was to obtain the relationship between splash erosion of the bare soil in seedbed condition and commonly used rainfall erosivity parameters (kinetic energy, intensity, and rainfall erosivity (EI30)). All sites were equipped with a rain gauge and an optical laser disdrometer where the splash erosion was measured, with modified Morgan splash cups. In order to investigate which parameter best describes the splash erosion process for all sites, a regression analysis was performed. In total, 80 splash erosion events were evaluated. Splash erosion can be described as a linear function of total kinetic energy and a non-linear function of EI30. However, the use of the total kinetic energy led to underestimation of the splash erosion rates for highly intensive rainfalls. Therefore, better results were obtained when using average rainfall intensity as the splash erosion predictor or the kinetic energy divided by the rainfall duration. Minor differences between the replicates during splash erosion measurements indicate that the modified Morgan splash cup provides a good tool for soil erosion assessment.
Soil erosion by water is affected by the rainfall erosivity, which controls the initial detachment and mobilization of soil particles. Rainfall erosivity is expressed through the rainfall intensity ...(I) and the rainfall kinetic energy (KE). KE–I relationships are an important tool for rainfall erosivity estimation, when direct measurement of KE is not possible. However, the rainfall erosivity estimation varies depending on the chosen KE–I relationship, as the development of KE–I relationships is affected by the measurement method, geographical rainfall patterns and data handling. This study investigated how the development of KE–I relationships and rainfall erosivity estimation is affected by the use of different disdrometer types. Rainfall data were collected in 1-min intervals from six optical disdrometers at three measurement sites in Austria, one site in Czech Republic and one site in New Zealand. The disdrometers included two disdrometers of each of the following types: the PWS100 Present Weather Sensor from Campbell Scientific, the Laser Precipitation Monitor from Thies Clima and the first generation Parsivel from OTT Hydromet. The fit of KE–I relationships from the literature varied among disdrometers and sites. Drop size and velocity distributions and developed KE–I relationships were device-specific and showed similarities for disdrometers of the same type across measurement sites. This hindered direct comparison of results from different types of disdrometers, even when placed at the same site. Thus, to discern spatial differences in rainfall characteristics the same type of measurement instrument should be used.
•Higher water content and greater surface seal formation reduces splash erosion.•Soil saturated hydraulic conductivity reflects the changes in surface structure.•Higher rainfall kinetic energy ...contributes to greater surface seal development.•Kinetic energy of simulated rainfall greatly depends on drop velocity spectrum.
Soil erosion by water is one of the most severe soil degradation processes. Splash erosion is the initial stage of soil erosion by water, resulting from the destructive force of rain drops acting on soil surface aggregates. Apart from rainfall properties, constant soil physical properties (texture and soil organic matter) are crucial in understanding the splash erosion. However, there is lack of information about the effect of variable soil properties such as soil initial water content and surface condition (seal formation) on splash erosion. The objective of the present study was to determine how initial water content and surface condition affected soil splash erosion under simulated rainfall. The changes in soil surface condition were characterized by hydraulic variability (saturated hydraulic conductivity) due to surface seal formation. Slit loam and loamy sand soil textures were used in the experiment. The soil samples were collected from the top layer; air dried, and filled into modified Morgan splash cups for splash erosion measurements. Rainfall was created in the laboratory using two types of rainfall simulators covering intensity range from 28 to 54 mm h−1 and from 35 to 81 mm h−1. The soil samples were exposed to three consecutive rainfall simulations with different time intervals between simulations and different initial water content and surface conditions (air-dried, wet-sealed, and dry-crusted). Wet-sealed soil samples had up to 70% lower splash erosion rate compared to air-dried samples, due to surface ponding followed by seal formation. A significant decrease in soil saturated hydraulic conductivity indicated the formation of surface seal for silt loam soils. A non-significant decrease in saturated hydraulic conductivity for loamy sand soil was attributed to earlier formation of stable seals. Two different rainfall simulators produced different amount of splash erosion rates; however, the splash erosion development for increasing rainfall intensity was almost equal considering same initial surface condition. These results provide insight into dynamic changes of individual soil parameters affected by rainfall, and could find wider application for more complex soil erosion prediction models.
Optical disdrometers can be used to estimate rainfall erosivity; however, the relative accuracy of different disdrometers is unclear. This study compared three types of optical laser-based ...disdrometers to quantify differences in measured rainfall characteristics and to develop correction factors for kinetic energy (KE). Two identical PWS100 (Campbell Scientific), one Laser Precipitation Monitor (Thies Clima) and a first-generation Parsivel (OTT) were collocated with a weighing rain gauge (OTT Pluvio
2
) at a site in Austria. All disdrometers underestimated total rainfall compared to the rain gauge with relative biases from 2% to 29%. Differences in drop size distribution and velocity resulted in different KE estimates. By applying a linear regression to the KE-intensity relationship of each disdrometer, a correction factor for KE between the disdrometers was developed. This factor ranged from 1.15 to 1.36 and allowed comparison of KE between different disdrometer types despite differences in measured drop size and velocity.
An understanding of splash erosion is the basis to describe the impact of rain characteristics on soil disturbance. In typical splash cup experiments, splashed soil is collected, filtered, and ...weighed. As a way to collect additional data, our experiments have been supplemented by a photogrammetric approach. A total of three soils were tested across three sites, one in the Czech Republic and two in Austria, all equipped with rain gauges and disdrometers to measure rainfall parameters. The structure from motion multiview stereo (SfM‐MVS) photogrammetric method was used to measure the raindrops impact on the soil surface. The images were processed using Agisoft PhotoScan, resulting in orthophotos and digital elevation models (DEMs) with a resolution of 0.1 mm/pix. The surface statistics included the mean surface height (whose standard deviation was used as a measure of surface roughness), slope, and other parameters. These parameters were evaluated depending on soil texture and rainfall parameters. The results show a linear correlation between consolidation and splash erosion with a coefficient of determination (R2) of approximately 0.65 for all three soils. When comparing the change in soil volume with rainfall parameters, the best correlation was found with the maximum 30‐minintensity (I30), resulting in R2 values of 0.48 (soil A, silt loam, 26% clay), 0.59 (soil B, silt loam, 18% clay), and 0.68 (soil C, loamy sand, 12% clay). The initial increase in the sample volume for the lowest splashed mass corresponds with the increase in the clay content of each of the soils. Soil A swells the most. Soil B swells less. Soil C does not swell at all and consolidates the most. We derived the relationship between the photogrammetrically measured change in surface height and the splash erosion (measured by weight) by accounting for the effect of the clay content.
Use of SfM‐MVS photogrammetry and direct measurement of splashed soil particles in splash erosion experiments. Estimation of the amount of splash erosion based on DEMs generation and analysis.
An experimental laboratory setup was developed and evaluated in order to investigate detachment of soil particles by raindrop splash impact. The soil under investigation was a silty loam Cambisol, ...which is typical for agricultural fields in Central Europe. The setup consisted of a rainfall simulator and soil samples packed into splash cups (a plastic cylinder with a surface area of 78.5 cm2) positioned in the center of sediment collectors with an outer diameter of 45 cm. A laboratory rainfall simulator was used to simulate rainfall with a prescribed intensity and kinetic energy. Photographs of the soil’s surface before and after the experiments were taken to create digital models of relief and to calculate changes in surface roughness and the rate of soil compaction. The corresponding amount of splashed soil ranged between 10 and 1500 g m−2 h−1. We observed a linear relationship between the rainfall kinetic energy and the amount of the detached soil particles. The threshold kinetic energy necessary to initiate the detachment process was 354 J m−2 h−1. No significant relationship between rainfall kinetic energy and splashed sediment particle-size distribution was observed. The splash erosion process exhibited high variability within each repetition, suggesting a sensitivity of the process to the actual soil surface microtopography.
Raindrop Influence on the Soil Surface Martin Neumann; David Zumr; Petr Kavka ...
Proceedings,
05/2020, Volume:
30, Issue:
1
Conference Proceeding, Journal Article
Peer reviewed
Open access
Soil erosion through various water processes is a worldwide problem. This research is focused on raindrops’ impact on soil surfaces, which is generally considered the initial stage of the erosion ...process. Splash erosion monitoring was conducted across three experimental sites: Petzenkirchen, Mistelbach (Austria) and Prague (Czech Republic). At each site, the rainfall characteristics (intensity and kinetic energy) were measured by rain gauges and disdrometers, and the impacts on soils (soil loss, soil surface consolidation, changes in soil surface roughness) were evaluated. Several disturbed soil samples with an area of 78.5 cm2 were placed into splash cups prior to each event. The splash cup collects the soil particles that are splashed out of the sample area when a raindrop hits the soil surface. The collected sediment suspension is processed in the laboratory after each event to determine the lost soil mass. Ground photogrammetry was utilized to determine the surface consolidation of a sample caused by a given rainfall event. Results for more than 500 soil samples were included in this study. Relationships between kinetic energy, rainfall intensity and soil loss and consolidation were evaluated.