The high-performance DIRC for the ePIC detector at the EIC Kalicy, G.
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
20/May , Volume:
1062
Journal Article
Peer reviewed
The next-generation nuclear physics facility in the United States will be the Electron-Ion Collider (EIC), scheduled to be built at Brookhaven National Laboratory (BNL). Excellent particle ...identification (PID) is one of the key requirements for the EIC central detector called ePIC. Identification of the hadrons in the final state is critical to study how different quark flavors contribute to nucleon properties. A detector using the Detection of Internally Reflected Cherenkov light (DIRC) principle, with a radial size of only 7-8 cm, was chosen as the PID system for the ePIC barrel region. Within the framework of the EIC R&D programs, the development of a high-performance DIRC (hpDIRC) detector was undertaken with the aim of significantly advancing state-of-the-art performance. Key components of the hpDIRC detector are a 3-layer compound lens and small pixel-size photo sensors. Currently, the hpDIRC R&D program is focused on developing and validating the radiation hard 3-layer lens, quality assurance of the BaBar DIRC radiation bars, and the early stage of the hpDIRC prototype program with Cosmic Ray Telescope at Stony Brook University, in preparation for beam tests at Fermilab in 2024.
The GlueX experiment at Jefferson Laboratory aims to perform quantitative tests of non-perturbative QCD by studying the spectrum of light-quark mesons and baryons. A Detector of Internally Reflected ...Cherenkov light (DIRC) was installed to enhance the particle identification (PID) capability of the GlueX experiment by providing clean
π
/K separation up to 3.7 GeV/
c
momentum in the forward region (
θ
< 11°), which will allow the study of hybrid mesons decaying into kaon final states with significantly higher efficiency and purity. The new PID system is constructed with radiators from the decommissioned BaBar DIRC counter, combined with new compact photon cameras based on the SuperB FDIRC concept. The full system was successfully installed and commissioned with beam during 2019/2020. The initial PID performance of the system was evaluated and compared to one from Geant4 simulation.
The next generation of high-luminosity experiments requires excellent particle identification detectors which calls for Imaging Cherenkov counters with fast electronics to cope with the expected hit ...rates. A Barrel DIRC will be used in the central region of the Target Spectrometer of the planned PANDA experiment at FAIR. A single photo-electron timing resolution of better than 100 ps is required by the Barrel DIRC to disentangle the complicated patterns created on the image plane. R&D studies have been performed to provide a design based on the TRB3 readout using FPGA-TDCs with a precision better than 20 ps RMS and custom frontend electronics with high-bandwidth pre-amplifiers and fast discriminators. The discriminators also provide time-over-threshold information thus enabling walk corrections to improve the timing resolution. Two types of frontend electronics cards optimised for reading out 64-channel PHOTONIS Planacon MCP-PMTs were tested: one based on the NINO ASIC and the other, called PADIWA, on FPGA discriminators. Promising results were obtained in a full characterisation using a fast laser setup and in a test experiment at MAMI, Mainz, with a small scale DIRC prototype.
Simulation and reconstruction of the PANDA Barrel DIRC Dzhygadlo, R.; Gerhardt, A.; Go¨tzen, K. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
12/2014, Volume:
766
Journal Article
Peer reviewed
Hadronic particle identification (PID) in the barrel region of the PANDA experiment at the new Facility for Antiproton and Ion Research in Europe (FAIR) at GSI, Darmstadt will be provided by a DIRC ...(Detection of Internally Reflected Cherenkov light) counter. To optimize the performance and reduce the detector cost, detailed simulations of different design elements, such as the width of the radiators, the shape of the expansion volume, and the type of focusing system, were performed using Geant. Custom reconstruction algorithms were developed to match the detector geometry. We will discuss the single photon resolution and photon yield as well as the PID performance for the Barrel DIRC baseline design and several detector design options.
Improved lifetime of microchannel-plate PMTs Lehmann, A.; Britting, A.; Eyrich, W. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
12/2014, Volume:
766
Journal Article
Peer reviewed
The charged particle identification at the PANDA experiment will be mainly performed with DIRC detectors. Because of their advantageous properties the preferred photon sensors are MCP-PMTs. However, ...until recently these devices showed serious aging problems which resulted in a diminishing quantum efficiency (QE) of the photo cathode. By applying innovative countermeasures against the aging causes, the manufacturers recently succeeded in drastically improving the lifetime of MCP-PMTs. Especially the application of an ALD coating technique to seal the material of the micro-channels proves very powerful and results in a lifetime of approximately 6C/cm2 integrated anode charge without a substantial QE degradation for the latest PHOTONIS XP85112. This paper will present a comparative measurement of the lifetime of several older and recent MCP-PMTs demonstrating this progress.
PDF
