Context.Optical long-baseline interferometry is moving a crucial step forward with the advent of general-user scientific instruments that equip large aperture and hectometric baseline facilities, ...such as the Very Large Telescope Interferometer (VLTI). Aims.AMBER is one of the VLTI instruments that combines up to three beams with low, moderate and high spectral resolutions in order to provide milli-arcsecond spatial resolution for compact astrophysical sources in the near-infrared wavelength domain. Its main specifications are based on three key programs on young stellar objects, active galactic nuclei central regions, masses, and spectra of hot extra-solar planets. Methods.These key science goals led to scientific specifications, which were used to propose and then validate the instrument concept. AMBER uses single-mode fibers to filter the entrance signal and to reach highly accurate, multiaxial three-beam combination, yielding three baselines and a closure phase, three spectral dispersive elements, and specific self-calibration procedures. Results.The AMBER measurements yield spectrally dispersed calibrated visibilities, color-differential complex visibilities, and a closure phase allows astronomers to contemplate rudimentary imaging and highly accurate visibility and phase differential measurements. AMBER was installed in 2004 at the Paranal Observatory. We describe here the present implementation of the instrument in the configuration with which the astronomical community can access it. Conclusions.After two years of commissioning tests and preliminary observations, AMBER has produced its first refereed publications, allowing assessment of its scientific potential.
Aims.In this paper, we present an innovative data reduction method for single-mode interferometry. It has been specifically developed for the AMBER instrument, the three-beam combiner of the Very ...Large Telescope Interferometer, but it can be derived for any single-mode interferometer. Methods.The algorithm is based on a direct modelling of the fringes in the detector plane. As such, it requires a preliminary calibration of the instrument in order to obtain the calibration matrix that builds the linear relationship between the interferogram and the interferometric observable, which is the complex visibility. Once the calibration procedure has been performed, the signal processing appears to be a classical least-square determination of a linear inverse problem. From the estimated complex visibility, we derive the squared visibility, the closure phase, and the spectral differential phase. Results.The data reduction procedures have been gathered into the so-called amdlib software, now available for the community, and are presented in this paper. Furthermore, each step in this original algorithm is illustrated and discussed from various on-sky observations conducted with the VLTI, with a focus on the control of the data quality and the effective execution of the data reduction procedures. We point out the present limited performances of the instrument due to VLTI instrumental vibrations which are difficult to calibrate.
Aims. We present the first NIR spectro-interferometry of the LBV η Carinae. The observations were performed with the AMBER instrument of the ESO Very Large Telescope Interferometer (VLTI) using ...baselines from 42 to 89 m. The aim of this work is to study the wavelength dependence of η Car's optically thick wind region with a high spatial resolution of 5 mas (11 AU) and high spectral resolution. Methods. The observations were carried out with three 8.2 m Unit Telescopes in the K-band. The raw data are spectrally dispersed interferograms obtained with spectral resolutions of 1500 (MR-K mode) and 12 000 (HR-K mode). The MR-K observations were performed in the wavelength range around both the $\ion{He}{i}$ 2.059 μm and the Brγ 2.166 μm emission lines, the HR-K observations only in the Brγ line region. Results. The spectrally dispersed AMBER interferograms allow the investigation of the wavelength dependence of the visibility, differential phase, and closure phase of η Car. In the K-band continuum, a diameter of $4.0\pm0.2$ mas (Gaussian FWHM, fit range 28–89 m baseline length) was measured for η Car's optically thick wind region. If we fit Hillier et al. (2001, ApJ, 553, 837) model visibilities to the observed AMBER visibilities, we obtain 50% encircled-energy diameters of 4.2, 6.5 and 9.6 mas in the 2.17$\,\mu$m continuum, the $\ion{He}{i}$, and the Brγ emission lines, respectively. In the continuum near the Brγ line, an elongation along a position angle of $120\degr\pm15\degr$ was found, consistent with previous VINCI/VLTI measurements by van Boekel et al. (2003, A&A, 410, L37). We compare the measured visibilities with predictions of the radiative transfer model of Hillier et al. (2001), finding good agreement. Furthermore, we discuss the detectability of the hypothetical hot binary companion. For the interpretation of the non-zero differential and closure phases measured within the Brγ line, we present a simple geometric model of an inclined, latitude-dependent wind zone. Our observations support theoretical models of anisotropic winds from fast-rotating, luminous hot stars with enhanced high-velocity mass loss near the polar regions.
The young stellar object MWC 297 is an embedded B1.5Ve star exhibiting strong hydrogen emission lines and a strong near-infrared continuum excess. This object has been observed with the VLT ...interferometer equipped with the AMBER instrument during its first commissioning run. AMBER/VLTI is currently the only near infrared interferometer that can observe spectrally dispersed visibilities. MWC 297 has been spatially resolved in the continuum with a visibility of $0.50^{+0.08}_{-0.10}$ as well as in the Brγ emission line where the visibility decreases to $0.33\pm0.06$. This change in the visibility with wavelength can be interpreted by the presence of an optically thick disk responsible for the visibility in the continuum and of a stellar wind traced by the Brγ emission line and whose apparent size is 40% larger. We validate this interpretation by building a model of the stellar environment that combines a geometrically thin, optically thick accretion disk model consisting of gas and dust, and a latitude-dependent stellar wind outflowing above the disk surface. The continuum emission and visibilities obtained from this model are fully consistent with the interferometric AMBER data. They agree also with existing optical, near-infrared spectra and other broad-band near-infrared interferometric visibilities. We also reproduce the shape of the visibilities in the Brγ line as well as the profile of this line obtained at an higher spectral resolution with the VLT/ISAAC spectrograph, and those of the Hα and Hβ lines. The disk and wind models yield a consistent inclination of the system of approximately 20°. A picture emerges in which MWC 297 is surrounded by an equatorial flat disk that is possibly still accreting and an outflowing wind that has a much higher velocity in the polar region than at the equator. The AMBER/VLTI unique capability of measuring spectral visibilities therefore allows us for the first time to compare the apparent geometry of a wind with the disk structure in a young stellar system.
High resolution and high signal to noise ratio spectroscopic observations of the classical β Cephei star γ Peg were obtained between 1991 and 2005. The analysis of these data combined with previously ...published results shows that γ Peg is a spectroscopic binary with an orbital period of 370.5 d. We discovered three new frequencies in addition to the well-known 6.5897 d-1 (0.15175 d) one. That at 6.01 d-1 is a typical β Cephei frequency. The two others at 0.68 and 0.87 d-1 are similar to the high degree g-mode frequencies found in SPB stars. Thus, γ Peg is a hybrid β Cephei-SPB star. Its position in the HR diagram is compatible with such a status. In addition, a small increase of the main period has been detected between the 1995 and 2005 observations.
Aims.We investigate the origin of the ${\rm Br}\gamma$ emission of the Herbig Ae star HD 104237 on Astronomical Unit (AU) scales. Methods.Using AMBER/VLTI at a spectral resolution $\mathcal{R}=1500$ ...we spatially resolve the emission in both the ${\rm Br}\gamma$ line and the adjacent continuum. Results.The visibility does not vary between the continuum and the ${\rm Br}\gamma$ line, even though the line is strongly detected in the spectrum, with a peak intensity 35% above the continuum. This demonstrates that the line and continuum emission have similar size scales. We assume that the K-band continuum excess originates in a “puffed-up” inner rim of the circumstellar disk, and discuss the likely origin of ${\rm Br}\gamma$. Conclusions.We conclude that this emission most likely arises from a compact disk wind, launched from a region 0.2–0.5 AU from the star, with a spatial extent similar to that of the near infrared continuum emission region, i.e., very close to the inner rim location.
Aims.We study the geometry and kinematics of the circumstellar environment of the Be star κ CMa in the Brγ emission line and its nearby continuum. Methods.We use the AMBER/VLTI instrument operating ...in the K band, which provides a spatial resolution of about 6 mas with a spectral resolution of 1500, to study the kinematics within the disk and to infer its rotation law. To obtain more kinematical constraints we also use a high spectral resolution Paβ line profile obtain in December 2005 at the Observatorio do Pico do Dios, Brazil and we compile $V/R$ line profile variations and spectral energy distribution data points from the literature. Results.Using differential visibilities and differential phases across the Brγ line we detect an asymmetry in the disk. Moreover, we found that κ CMa seems difficult to fit within the classical scenario for Be stars, illustrated recently by α Arae observations, i.e. a fast rotating B star close to its breakup velocity surrounded by a Keplerian circumstellar disk with an enhanced polar wind. We discuss the possibility that κ CMa is a critical rotator with a Keplerian rotating disk and examine whether if the detected asymmetry can be interpreted within the “one-armed” viscous disk framework.
Aims.This paper describes the design goals and engineering efforts that led to the realization of AMBER (Astronomical Multi BEam combineR) and to the achievement of its present performance. ...Methods.On the basis of the general instrumental concept, AMBER was decomposed into modules whose functions and detailed characteristics are given. Emphasis is put on the spatial filtering system, a key element of the instrument. We established a budget for transmission and contrast degradation through the different modules, and made the detailed optical design. The latter confirmed the overall performance of the instrument and defined the exact implementation of the AMBER optics. Results.The performance was assessed with laboratory measurements and commissionings at the VLTI, in terms of spectral coverage and resolution, instrumental contrast higher than 0.80, minimum magnitude of 11 in K, absolute visibility accuracy of 1%, and differential phase stability of 10-3 rad over one minute.
Context. The presence of stellar p- and g-modes allows us to test stellar structure models in great detail from the core to the envelope. As the driving mechanisms are not yet fully understood, the ...first important step is to provide clear evidence of these pulsation modes. Aims. Recent space missions have confirmed that the γ Doradus and the δ Scuti observational instability strips overlap and consequently that many stars may be hybrids. CoRoT ID 105733033 is an excellent example of these hybrid pulsators as it shows g- and p-modes with almost similar amplitudes in two clearly distinct frequency domains. We present a detailed frequency analysis of the CoRoT star ID 105733033, which is obtained with a classical Fourier analysis. Methods. After removing residual instrumental effects from the CoRoT light curve of N2 level, frequencies with an amplitude as small as 0.1 mmag were determined with Period04 and SigSpec up to 50 d-1, although if deemed necessary lower amplitudes and higher frequencies were also investigated. The frequency spectrum of CoRoT ID 105733033 clearly consists of two distinct ranges, which are typical of γ Doradus and δ Scuti pulsation. Focus was placed on the identification of linear combinations and frequencies due to the coupling between γ Doradus and δ Scuti modes. Results. We detect 198 γ Doradus type frequencies in the range 0.25;4 d-1, of which 180 are not combination frequencies, and 24 of them are separated by a constant period-interval ΔP = 0.03074 d. According to the asymptotic theory, these 24 frequencies correspond to a series of g-modes of the same ℓ-degree and different radial orders n. We also detect 246 δ Scuti type frequencies in the range 10.1;63.4 d-1. The dominant frequency F = 12.6759 d-1 was identified as the fundamental radial mode. Our most noteworthy result is that all the main γ Doradus frequencies fi are also detected in the δ Scuti domain as F ± fi with four times smaller amplitudes. Once these frequencies were removed, only 59 can be considered as individual δ Scuti frequencies. Conclusions. A coupling between g- and p-modes is proposed to be a tool for detecting g-modes in the Sun, but this coupling has never yet been observed. Our present study may be valuable input to theoretical studies, addressing the mutual influence of g- and p-mode cavities and the deviation from classical theory. Furthermore, we identify a sequence of g-modes belonging to the same ℓ but with consecutive orders n.
PDF